• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.538-543
• /
• 2011

In this paper, optimal spot weld layout design of the shock tower structure is performed for increasing fatigue life of spot weld and fatigue life of shock tower simultaneously. To predict the fatigue life, linear static analysis is conducted then fatigue analysis is performed by applying random vibration load. To optimize the spot weld layout, design variables that have an effect on spot weld fatigue life are selected. Based on the DOE table, spot weld fatigue analysis is conducted. Finally, response surface model is made from fatigue analysis results and optimized spot weld layout model which increases fatigue life of sport weld and fatigue life of shock tower is determined.

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.798-804
• /
• 2011

In this paper, optimal spot weld layout design for a shock tower structure is presented. This design increases the fatigue life of the spot-welds thereby increasing the fatigue life of the shock tower itself. In order to predict the fatigue life, a quasi-static analysis has been conducted then a fatigue analysis was performed through the application of random vibration loads. In order to optimize the spot weld layout, the design variables that have an effect on the spot weld fatigue life were determined. A spot weld fatigue analysis was then conducted based on the experiment design. Finally, a response surface model was made using the fatigue analysis results and an optimized spot weld layout model, one that increases the fatigue life of the spot welds and thereby the fatigue life of the shock tower, was developed.

• Earthquakes and Structures
• /
• 제3권5호
• /
• pp.767-781
• /
• 2012

The residual capacity against collapse of a main shock-damaged bridge can be coupled with the aftershock ground motion hazard to make an objective decision on its probability of collapse in aftershocks. In this paper, a steel tower suspension bridge with a main span of 2000 m is adopted for a case-study. Seismic responses of the bridge in longitudinal and transversal directions are analyzed using dynamic elasto-plastic finite displacement theory. The analysis is conducted in two stages: main shock and aftershocks. The ability of the main shock-damaged bridge to resist aftershocks is discussed. Results show that the damage caused by accumulated plastic strain can be ignored in the long-span suspension bridge. And under longitudinal and transversal seismic excitations, the damage is prone to occur at higher positions of the tower and the shaft-beam junctions. When aftershocks are not large enough to cause plastic strain in the structure, the aftershock excitation can be ignored in the seismic damage analysis of the bridge. It is also found that the assessment of seismic damage can be determined by superposition of damage under independent action of seismic excitations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2280-2283
• /
• 1999

Close to high power radio/radar transmitters, there is a possibility that electrical sparks may occur at discontinuities in metallic structures. If these structures are in an area where flammable mixtures are present, there is a danger that fire or explosion may happen by these sparks. Voltage may be induced on these metallic structures by the radio-frequency transmitter. In this case, a person who comes into contact with these structure may be undergone a severe electrical shock. In this paper, assessment of the these hazards was investigated through experimental and evaluation for actual tower cranes near AM radio transmitters.

• Journal of Microbiology and Biotechnology
• /
• 제20권2호
• /
• pp.403-409
• /
• 2010

Saccharomyces cerevisiae Hsp30 is a plasma membrane heat shock protein that is induced by various environmental stress conditions. However, the functional role of Hsp30 during diverse environmental stressors is not presently known. To gain insight into its function during thermal stress, we have constructed and characterized a ${\Delta}hsp30$ strain during heat stress. $BY4741{\Delta}hsp30$ cells were found to be more sensitive compared with BY4741 cells, when exposed to a lethal heat stress at $50^{\circ}C$. When budding yeast is exposed to either heat shock or weak organic acid, it inhibits Pma1p activity. In this study, we measured the levels of Pma1p in mutant and Wt cells both during optimal temperature and heat shock temperature. We observed that $BY4741{\Delta}hsp30$ cells showed constitutive reduction of Pma1p. To gain further insights into the role of Hsp30 during heat stress, we compared the total protein profile by 2D gel electrophoresis followed by identification of differentially expressed spots by LC-MS. We observed that contrary to that expected from thermal-stress-induced changes in gene expression, the ${\Delta}hsp30$ mutant maintained elevated levels of Pdc1p, Trx1p, and Nbp35p and reduced levels of Atp2p and Sod1p during heat shock. In conclusion, Hsp30 is necessary during lethal heat stress, for the maintenance of Pma1p and a set of thermal stress response functions.

• 대한기계학회논문집A
• /
• 제30권9호
• /
• pp.1142-1147
• /
• 2006

A practical method for reducing the number of spot welds in automotive structures considering fatigue crack initiation life is suggested. At first, an influence index for the durability and the fatigue life of a spot weld itself is defined and then taken as the main effect of the DOE analysis. Spot welds that can be removed without serious reduction of durability through numerical experiments are selected by the results of DOE. The proposed method was applied to the shock tower and LCA(lower control arm) structure of a vehicle, which are important components in durability-related point of view.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.44-51
• /
• 2015

As the domestic communication industry has been made rapid progresses, the construction of base stations are also expanded yearly from more than 86,000 ones in the year 2005 to over 300,000 ones in 2013. While the new construction and rebuilt works have been rapidly increased, there has been not tried about the analysis as well as the control of hazards for the construction works. This study is conducted to do not only the focus interview for 27 expert groups who are engaged in the construction works and safety, but also the questionnaires for AHP analysis which is suggested by the Korea Occupational Safety and Health Agency for 92 persons who are engaged in the construction works in order to analyze the hazards of construction works for base stations. The high ranked risk works which are acquired from the two methods are fall under installation of antennae, struck by the hand tools and construction materials under installation of antennae, fall during going up and down the steel tower and telegraph poles and the fall by electric shock during the underground cable works. The control for the above hazards are the installation of fall protection equipments, the installation of safety nets for falling objects and the installation of protection equipment of electric shock.

• 한국콘텐츠학회논문지
• /
• 제19권1호
• /
• pp.472-483
• /
• 2019

첨단 미래사회에서 우리는 왜 삶을 위협하는 다양한 위기로부터 자유로울 수 없는가? 재난은 습관적이고 제도화된 행동 양식을 중단시키고 사람들을 사회적 개인적 변화에 따르게 하는 일종의 사회적 충격을 낳는다. 역사적 재난 사례연구는 역사적 재난의 맥락 이해를 통한 현재 재난관리의 재검토가 가능하고, 미래 재난을 해결하기 위한 해답을 찾을 수 있다. 또한 재난 관리의 새로운 패러다임과 방식을 도출할 수 있다. 이 논문의 주된 목적은 역사 속에서 나타난 재난관리를 통한 현대 국가의 재난관리의 발전 방향을 발견하는 데 있다. 연구결과에서 흥미로운 사실은 1925년 을축년 대홍수 당시 재난관리 컨트롤타워 역할이 적절히 이루어졌고, 일원화된 재난관리 체계로 유관기관과의 협조가 원활히 이루어 졌다는 것이다. 그리고 재난관리 조직의 동기부여를 통한 조직몰입에 긍정적 영향을 미쳤다. 역사의 기록을 통한 성찰과 학습을 교훈삼아 현재의 제도 개선을 끊임없이 이루어 나간다면 미래 안전사회를 위한 혜안을 찾을 수 있을 것이다.