• 대한산업공학회지
• /
• 제37권3호
• /
• pp.248-257
• /
• 2011

Cross docking is a logistics management concept in which items delivered to a terminal by inbound trucks are immediately sorted out, routed and loaded into outbound trucks for delivery to customers. Two main advantages by introducing a cross docking terminal are to consolidate multiple smaller shipment into full truck load and remove storage and order picking processes to save up logistics costs related to warehousing and transportation costs. This research considers the scheduling problem of trucks in the cross docking terminals with multi-door in an inbound and outbound dock, respectively. The trucks sequentially deal with the storage process at the one of inbound doors and the shipping process at the one of the outbound doors. A mathematical model for an optimal solution is derived, and genetic algorithms with two different chromosome representations are proposed. To verify performance of the GA algorithms, we compare the solutions of GAs with the optimal solutions and the best solution using randomly generated several examples.

• 대한건축학회논문집:계획계
• /
• 제35권9호
• /
• pp.11-18
• /
• 2019

Commercial facilities are put under construction for inhabited remodeling due to management or cost issues. Temporary facility planning is important in inhabited remodeling because building construction and management are simultaneously performed in this type of remodeling. The purpose of this research is to identify how the temporary spatial structure changes for each inhabited remodeling construction level of commercial facilities and existence of tenants affect the spatial usability. It also examines a relationship between the traffic flow and spatial configurations during the inhabited remodeling process where the tenants are temporarily removed and only the spatial configuration are maintained and verifies if the established theory that the spatial configurations in commercial facilities significantly affect the traffic is also valid during the inhabited remodeling process. The research result was found that the amount of traffic during the inhabited remodeling construction process is more affected by the factors such as tenants rather than spatial configurations. It is anticipated that the result of this research will serve as a guideline to establish logical inhabited remodeling plans for each level of constructing temporary facilities. Furthermore, it can be used to minimize the sales damage caused by the construction or as a guideline to determine the order of tenants to be moved into the new commercial facilities.

• 동아시아경상학회지
• /
• 제11권2호
• /
• pp.39-57
• /
• 2023

Purpose - This paper is to examine the work of a third party in the process of import and export management. In other words, the purpose of this paper is investigate the status and functional role of a third party in relation to each terms of the trade contract. Research design, data, methodology - This study consists of 5 chapters through literature survey. It will examine the involvement of the third party through each terms. Chapter 1 introduction, Chapter 2 deals with trade contracts, Chapter 3 investigates the shipping terms, payment terms, and insurance terms, and Chapter 4 reviews with commercial arbitration. And in Chapter 5, it looks at the conclusion and implications. Results - The relevant party in the import and export management process may be a third party through outsourcing, not the principal. At this time, in fulfilling each condition of trade, it can be seen that the implementation of tasks through the participation of a third party with high expertise can more smoothly and productively implement the overall import and export management. Therefore, it can be seen that the implementation of the trade business in which the third party participated can be interpreted in terms of derivative effects and at the same time can be a way to improve the principal's competitiveness procedurally. Conclusions -Through this study, in the import and export management, the performance of the work through the agent makes the entire process more smooth and efficient. Outsourcing of roles using the expertise of a third party, a subcontractor rather than a principal, is desirable and important.

• 수산해양교육연구
• /
• 제29권3호
• /
• pp.665-676
• /
• 2017

Over the past several years, sea trade have increased traffic by ships which highlighted a problem of unwanted species invading the surrounding seas through ship's ballast water discharge. Maritime trade volume has continuously increased worldwide and the problem still exists. The respective countries are spending billions of dollars in an effort to clean up the contamination and prevent pollution. As part of an effort to solve marine environmental problem, BWM(Ballast Water Management) convention was adopted at a diplomatic conference on Feb. 13 2004. In order to comply harmoniously this convention by each country. This convention will be effective after 12 months from the date which 30 countries ratified accounting for more than 35% of the world merchant shipping volume. On Sep. 8 2016, Finland ratified this convention and effective condition was satisfied as 52 states and world merchant vessel fleet 35.1441%. Thus, after Sep. 8 2017, all existing vessels shall be equipped with BWTS(Ballast Water Treatment System) in accordance with D-2 Regulation, which physically handles ballast water from ballast water exchange system(D-1 Regulation). In this study, we analyzed in detail the optimal design method using the Risk Analysis and Evaluation technique which is mainly used in the manufacturing factory or the risky work site comparing with the traditional design concept method applying various criteria. The Risk Assessment Method is a series of processes for finding the Risk Factors in the design process, analyzing a probility of the accident and size of the accident and then quantifying the Risk Incidence and finally taking measures. In this study, this method was carried out for Electrolysis treatment type on DWT 180K Bulk Carrier using "HAZOP Study" method among various methods. In the Electrolysis type, 63 hazardous elements were identified.

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.351-361
• /
• 2006

The fatigue strength analysis of VLFS is carried out by using a 3-dimensional plate finite element model with a zooming technology which performs the modeling of wide portions of the structure by a coarse mesh but the concerned parts by a very fine mesh of t by t level. And a stepwise substructure modeling technique for global loading conditions is applied which uses the motion response of the global structure from 2-D plate hydroelastic analysis as the enforcing nodal displacements of the concern 3-D structural zooming model. Seven incident wave angles and whole ranges of frequency domains of wave spectrum are considered. In order to consider the effect of breakwater, the modified JONSWAP wave spectrum is used. Applying the wave data of installation region, the longterm spectrum analysis is done based on stochastic process and the fatigue life of the structure is estimated. Finally some design considerations from the view point of fatigue strength analysis of VLFS are discussed.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.425-444
• /
• 2014

Purpose: This study aims to overcome the problem of private education market environment which is polarized into commercialized large private education institutions and small and medium sized private education institutions in a poor business environment, and develop systematic performance measurement model applicable for small and medium sized private education institutions. Methods: To develop the BSC which measures financial and non-financial indicator in a balanced manner and introduce the BSC into private education institutions that contain conflicting goals "EDUCATION" and "PROFIT". In particular, Utilizing the methodology of AHP, the priority of strategies and execution assignments are derived. Results: BSC model was developed and introduced by cooperating with executives of the private education institution. Moreover, the study permits to achieve the strategy, enterprise-wide vision and mission by deriving strategy map and applying it to the private education institution. To measure the performance of BSC model instruction, KPI corresponding to the strategic objectives of each perspective was derived. Conclusion: BSC model generally introduces to large-sized companies and public institutions. In this study, BSC model is developed by focusing on small and medium sized private institution. Furthermore, this study is more than simple model development, it makes a connection with achievement of strategic objectives, enterprise-wide vision and mission through strategy map and strategy execution method. Through the developed BSC model and strategy execution method, utilization plan in practice and customized model for private education institutions coexisting profit and non-profit objectives were developed, and academic implications were presented.

• 한국항해항만학회지
• /
• 제29권6호
• /
• pp.547-553
• /
• 2005

본 연구에서는 수직배치형 장치장 블록형태의 자동화 컨테이너 터미널을 대상으로 안벽에서 컨테이너의 양${\cdot}$적하 작업을 수행하는 안벽크레인(Q/C)에 대한 하역생산성을 평가해 보았다. 분석 대상이 되는 안벽크레인의 유형으로 기존의 싱글트롤리 타입외에 차세대 안벽크레인으로 인식되고 있는 듀얼트롤리 더블트롤리, 수직순환식의 하역방식을 가지는 네 가지 장비이다. 이들은 각기 다른 방식으로 선박의 컨테이너를 하역하며, 이들 각각에 대해 기계적 생산성과 순작업 생산성을 산출해 보았다. 특히, 안벽크레인의 순작업 생산성을 산출하기 위해 각 장비에 대한 시뮬레이션 모델을 수립하고 이를 적용한 시뮬레이션 시스템을 개발하였으며, 개발된 시뮬레이션 시스템을 통해 내 가지 안벽크레인에 대한 다양한 시뮬레이션이 수행되었다.

• 한국항해항만학회지
• /
• 제36권1호
• /
• pp.69-74
• /
• 2012

오늘날 글로벌 수 출입 공급망 내에서 항만 하역작업의 효율성은 아주 중요하다. 해상운송에서는 컨테이너화와 더불어 늘어나는 화물량을 극복하기 위해서 초대형선의 운항이 일반화 되고 있다. 따라서 컨테이너 터미널의 관리자들은 안벽작업의 효율성을 극대화하기 위하여 더블 사이클과 듀얼 사이클 방법을 시도하고 있다. 또한, 야드 트랙터의 할당의 효율성을 높이기 위해서 야드 트랙터 풀링 방법이 제시되었다. 본 논문에서는 기존의 풀링 방법들과 듀얼 사이클을 고려한 풀링 방법의 비교를 통해서 듀얼 사이클의 효율성을 분석하였다. YT 할당 모형은 시뮬레이션 분석 소프트웨어인 Arena를 이용하여 수립되었다. 실험결과 듀얼 사이클이 많은 것이 항상 크레인 생산성을 높이는 것은 아닌 것으로 분석되었다.

• 건축역사연구
• /
• 제9권1호
• /
• pp.27-46
• /
• 2000

This study aims at examining the background and development process of Masan city after Koryo Dynasty, making a reconstructive map of Original Masan using the first registration maps made in 1912 and analyzing the urban structure of the Original Masan area. The origin of Masan city went back to Koryo dynasty. Around 1040 Koryo government placed an official shipping facility in Masan to transport the taxed grain to the capital city. After that Masan became an important port covering the southern part of KyungSang-Do. And the urbanization of the Original Masan began to bud after a shipping facility was again established by the Chosun Dynasty in 1760 and strengthened in the 19th century after the social standing system was broken and many peasants moved to cities as daily workers. In 1899 Masan was forced to be opened to foreign powers and they placed an international settlement distanced from the area(Original Masan). After this many Japanese advanced to the international settlement and further to the area. The advancement of Japanese brought a critical change in the urban structure of the area. Land was owned by Japanese and many modern sysytems were introduced such as modern buildings, new roads, railroad and modern factories. According to the reconstructive map of the area, 80.5% of land lots are less than $200m^2$ showing the size of each land lot is comparatively small. And Japanese occupied 31.5% of the land in the area. Their land was located on the stratigic points near the port and the center of commerce. The ratio of the road area to the whole land was around 14%, not so low for urban areas in that time. The reconstructive map reveals the exact coastline of the year 1912 erased now due to filling the sea and extending the land, Present Masan city has been developed having the Original Masan as its nucleus. The area has been always the center of urban activities for Masan city. Making an exact reconstructive map for the area and analyzing the urban structure of the area in 1912 is a very important work to understand Masan city wholy.

• 한국통신학회논문지
• /
• 제28권5C호
• /
• pp.486-492
• /
• 2003

퍼지 ART 알고리즘에서 경계 변수는 임의의 패턴과 저장된 패턴과의 불일치(mismatch) 허용도를 결정한다. 이 경계 변수가 크면 입력 패턴과 저장 패턴 사이에 약간의 차이가 있어도 새로운 카테고리(category)로 분류하게 된다. 반대로 경계 변수가 작으면 입력 패턴과 저장 패턴 사이에 많은 차이가 있더라도 유사성이 인정되어 입력 패턴을 저장 패턴의 카테고리로 분류한다. 따라서 영상 인식에 적용하기 위해서는 경계 변수를 경험적으로 설정한다. 그리고 연결 가중치를 조정하는 과정에서 저장된 패턴들의 정보들이 손실되는 경우가 발생하여 인식률을 저하시킨다. 본 논문에서는 퍼지 ART 알고리즘의 문제점을 개선하기 위하여 퍼지 논리 접속 연산자를 이용하여 경계 변수를 동적으로 조정하고 저장 패턴과 학습 패턴간의 실제적인 왜곡 정도를 충분히 고려하여 승자 노드로 선택된 빈도수를 가중치 조정에 적용하는 개선된 퍼지 ART 알고리즘을 제안하였다. 제안된 방법의 인식 성능을 확인하기 위해서 운송 컨테이너 영상을 대상으로 실험한 결과, 기존의 ART2 알고리즘이나 퍼지 ART 알고리즘보다 클러스터의 수가 적게 생성되었고 인식 성능도 기존의 방법들보다 우수한 성능이 있음을 확인하였다.