• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.363-366
• /
• 2001

Many joint parts by welding are found in the compression vessels, ship structures, pipings, heat exchangers, etc. Before their welding, steel plate cutting in a required form is very important. But because of the present CAD system's capability, unless otherwise expensive general CAD system is equipped, the efficiency or the accuracy of the cutting work can not be achieved easily. In order to get over this sort of problems, application-specific software that is limited on for the development view of the joint parts in those sort of facilities mentioned before was developed in this study.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.6
• /
• pp.806-813
• /
• 1999

The effect of Post-Weld Heat Treatment(PWHT) of SS400 Steel was investigated with parameters such as micro vickers hardness corrosion potential polarization behaviors galvanic current Al anode generating current Al anode weight loss etc. Hardness of each parts(HAZ, BM, WM)by PWHT is lower than that of each parts by Non Post-Weld Heat Treatment(NPWHT) However hardness of WM of HAZ part was the highest among those three parts and HAZ area were also acted as cathode without any case of heat treatment. Potential difference between each three parts by PWHT was also smaller compared to NPWHT. Therefore it is suggested that Corrosion resistance property is increased by PWHT. However both Al anode generating current and anode weight loss was also decreased by PWHT compared to NPWHT when SS400 steel is cathodically protected by Al anode.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.5
• /
• pp.321-328
• /
• 2013

A method of designing a manufacturing shape of ship plate parts considering welding deformation is introduced. In this paper, the design shape of a bracket is deformed not by a thermoelastic method but by a pure geometric method. Deformation quantities are estimated based on data captured in the field and then a manufacturing design shape is obtained by deforming an original design shape by a geometric deformation method. The proposed method has been implemented and tested in the shipyard.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.16 no.3
• /
• pp.1-8
• /
• 1979

Various approaches to the analysis of stiffened plating in ship structures have been proposed by a number of researchers. Among them, the finite element method is known to be the most powerful method. However, for many parts of ship's structure having simple geometry and boundary conditions, the F.E.M. is often extravagant and unnecessary. In this paper, the authors have attempted to introduce the finite strip method which was proposed by Y.K. Cheung to avoid the difficulties involved in F.E.M. The results of calculations on the displacements and stresses in various plates with or without stiffeners were satisfactory, which shows the F.S.M. is useful for structural analysis of ship's plating.

• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.999-1016
• /
• 2015

In this paper, we introduce a new method for assembly of shipbuilding blocks at sea and present its feasibility focusing on structural safety. The core concept of this method is to assemble ship building blocks by use of bolting, gluing and welding techniques at sea without dock facilities. Due to its independence of dock facilities, shipyard construction capability could be increased considerably by the proposed method. To show the structural safety of this method, a bulk carrier and an oil tanker were employed, and we investigated the structural behavior of those ships to which the new block assembly method was applied. The ship hull models attached with connective parts are analyzed in detail through finite element analyses, and the cargo capacity of the bulk carrier is briefly discussed as well. The results of these studies show the potential for applying this new block assembly method to practical shipbuilding.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.24 no.1
• /
• pp.51-66
• /
• 1987

In this paper, the authors investigate theoretically the motion and longitudinal strength of ships among waves talking account of the effects of nonlinearities such as the hull shape, bottom emergence, and hydrodynamic impact. Incidentally the ship is treated as an elastic beam in heading wave condition regarding characteristics of slamming and whipping-according to the variation in the range of a quarter length of the ship forward and the increase of the elastic modes up to 4-th vibration mode were investigated by the present theory. Calculations are performed for 97m container ship and its validity is confirmed by a series of model tests. Conclusions obtained are as follows; 1) Acceleration and pressure estimated by the present theory are in good accordance with experiments. 2) The present non-linear theory may be applied for estimating longitudinal bending moment of ships in slamming and whipping conditions. 3) In investigation of the characteristic in response according to shape variation for parts under draft and vow-flare in the range of a quarter length of the ship forward, dynamic responses due to the former were much more conspicuous than those due to the later. 4) In the maximum bending moment, the considering case up to 2-the mode are larger, about $10{\sim}15%$, than that up to 4-th mode.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.71-78
• /
• 2006

The image of an object obtained by the radar is not corresponding to its true shape, because the image of an object observed by the radar is receiving an influence such as multiple-reflections and expanded in bearing because of the beam width of a radar. In addition, a radio wave does not hit the entire surface of an object. Therefore, the image of the front side of a ship facing a radar antenna corresponds to its true shape. In this paper, a method to estimate a ship's shape by means of the integration of the front parts of images obtained from radars is proposed. In addition, a matter, which is observation error of each radar, in using multi-radars, and the process included in the proposed method for solving the matter, are described. As a result of the experiment, the accuracy of about 3 degrees in ship's heading and about 14 meters in length and about 9 meters in beam was obtained.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.25-26
• /
• 2007

Ship are typically thin-walled structures and consists of stiffened plate structure by purpose of required design load and weight reduction etc. Also, a hull structural characteristics are often used in structures with curvature at deck plating with camber, side shell plating at fore and aft parts and bilge circle parts, It have been believed that these structures can be modelled fundamentally by a part of cylinder. Structural component with curvature subjected to combined loading regimes and complex boundary conditions, which can potentially collapse due to buckling. Hence, for more rational and safe design of ship structures, it is crucial importance to better understand the interaction relationship of the buckling and ultimate strength for cylindrically curved plate under these load components. In this study, the ultimate strength characteristic of curved plate under combined load(lateral pressure load + axial compressive load) are investigated through using FEM series analysis with varying geometric panel properties.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.331-338
• /
• 2023

ROK Navy Landing Ship Fast(LSF-II) is equipped with special equipment that is not compatible with other combat ships due to special missions. So there are almost no maintenance capabilities except for simple repair parts replacement and maintenance parts. The researcher determined that the way to solve these problems was to apply Performance Based Logistics (PBL), and reviewed the cases of PBL applications abroad and domestically. To confirm the current maintenance capability, we visited LSF-II operation unit to identify maintenance capabilities for each mounted equipment, and interviews with operators and maintenance practitioners confirmed the limitations of outsourcing maintenance and the need to apply PBL. In order to analyze the effect of PBL application, the measure of effectiveness and measure of performance were selected based on the opinions of LSF-II operation/maintenance practitioners and PBL experts and the practical experience of this researcher. A survey was conducted on operation/maintenance practitioners and professional personnel. Based on the survey results, the effect of applying PBL was analyzed using the AHP technique, and an efficient PBL application plan was proposed for LSF-II.

• Transactions of Materials Processing
• /
• v.19 no.8
• /
• pp.523-528
• /
• 2010

The forging industry is composed of those plants that make parts to order for customers; or make parts for their own company's internal use; or make standard parts for resale. Also, the forging industry is closely related with automobile industry and ship building industry - Korea's major export industry. But, it is hard to find the Korea's forging industry's statistical analysis because it is not revealed with final product. In this paper, we perform statistical analysis using the micro data service provided by the Statistics Korea. We focus on the analysis of production costs as well as the status of forging company and their employee.