• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.269-272
• /
• 2011

Recently, all areas of IT has been rapidly in land. As a result, the location is very important in everyday life. But in ship are limits network with communication Equipment and service. As a result, be far removed from information age. Currently, ship is connected with the outside world via satellite on the voyage. But, because high billing, ship is possible data transfer using low speed bandwidth. Because ship is not possible using LAN, only limit ship's crew some use internet in limited space. So, ship is required construction of the network. In this paper, because composition of basic IT environment with information need of crew and customer from ship to cruises, there construct LAN in ship and propose network design for network of ship.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.187-190
• /
• 2010

Lately, IT has been rapidly in land. as a result, mobile device come into wide use and is very important in everyday life. But in ship are limits network with communication Equipment and service. as a result, be far removed from information age. Currently, ship Is connected with the outside world via satellite on the voyage. but, because high billing, ship is possible data transfer using low speed bandwidth. because ship is not possible using LAN, only limit ship's crew some use internet in limited space. so, ship is required construction of the network. in this paper, because composition of basic IT environment with information need of crew and customer from ship to cruises, there construct LAN in ship and propose network design for network of ship.

• Journal of Navigation and Port Research
• /
• v.43 no.5
• /
• pp.310-319
• /
• 2019

With the recent increase in the volume of liquid cargo transportation, there is a need for STS( Ship To Ship) globally. In the case of the STS mooring, the safety assessment should be conducted according to other criteria because mooring is different from the general mooring at the quay, but there is no separate standard in Korea. Thus in this study, STS mooring simulation and sensitivity analysis using OPTIMOOR program, the numerical analysis program, was conducted to identify the characteristics of the STS mooring. The target sea modeled the Yeosu port anchorage in Korea and the target ship was selected as the case of VLCC (Very Large Crude Oil Carrier)-VLCC. Through the numerical simulation and sensitivity analysis, the characteristics of STS mooring were identified. Also based on these results, we focused on establishing the standard for STS mooring safety assessment. Numerical simulation results show that the STS mooring safety can be changed according to a ship's cargo loading condition, pre-tension of mooring line, sea depth, encounter angle with the weather, and the weather condition. Additionally, the risk matrix is prepared to establish the safe external force range in the corresponding sea area. This result can be used to understand the mooring characteristics of STS and contribute to the revision of mooring safety assessment criteria.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.1
• /
• pp.14-24
• /
• 2015

This study proposed an estimation method of allowable wave height for loading and unloading of the ship and evaluation of effective working days considering moored ship motion that is affected by sip sizes, mooring conditions, wave periods and directions. The method was examined validity by comparison with wave field data at pier $8^{th}$ in Pohang New Harbor. The wave field data obtained with wave height of 0.10~0.75 m and wave period of 7~13 s in ship sizes of 800~35,000 ton when a downtimes have occurred. On the other hand, the results of allowable wave height for loading and unloading of the ship in this method have obtained with wave heights of 0.19~0.50 m and wave periods of 8~12 s for ship sizes of 5,000, 10,000 and 30,000 ton. Thus this method well reproduced the field data respond to various a ship sizes and wave periods. And the results of this in Korea are didn't respond to various the ship sizes and wave periods, and we h method tended to decrease in 16~62 percent when have considered long wave, and it is decreased in 0~46 percent when didn't consider long wave than design standards in case of the ship sizes of 5,000~30,000 ton, wave period of 12 s and wave angle of $75^{\circ}$. The allowable wave heights for loading and unloading of the ship proposed by design standards in Korea have found that overestimated on smaller than 10,000 ton. On the other hand, the rate of effective working days considering ship motion at pier $8^{th}$ in Pohang New Harbor reduced in 6.5 percent when compare with the results without considering ship motion.

• Selected Papers of The Society of Naval Architects of Korea
• /
• v.2 no.1
• /
• pp.79-105
• /
• 1994

A ship in waves is suffered from the various wave loads that comes from its motion throughout its life. Because these loads are dynamic, the analysis of a ship structure must be considered as the dynamic problem precisely. In the rationally-based design, the dynamic structural analysis is carried out using dynamic wave loads provided from the results of the ship motion calculation as a rigid body. This method is based on the linear theory assumed low wave height and small amplitude of motion. But at the rough sea condition, high wave height, compared with ship's depth, induce the large ship motion, so the ship section configuration under waterline is rapidly changed at each time. This results in a non-linear problem. Considering above situation in this paper, a strength analysis method is introduced for the hull girder among waves considering non-linear hydrodynamic forces. This paper evaluates the overall or primary level of the ship structural dynamic loading and dynamic response provided from the non-linear wave forces, and bottom flare impact forces by momentum slamming theory. For numerical calculation a ship is idealized as a hollow thin-walled box beam using thin walled beam theory and the finite element method is used. This method applied to a 40,000 ton double hull tanker and attention is paid to the influence of the response of the ship's speed, wave length and wave height compared with the linear strip theory.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.352-359
• /
• 2018

As a fuel for ship propulsion, liquefied natural gas (LNG) is currently considered a proven and reasonable solution for meeting the IMO emission regulations, with gas engines for the LNG-fueled ship covering a broad range of power outputs. For an LNG-fueled ship, the LNG bunkering process is different from the HFO bunkering process, in the sense that the cryogenic liquid transfer generates a considerable amount of boil-off gas (BOG). This study investigated the effect of the temperature difference on boil-off gas (BOG) production during ship-to-ship (STS) LNG bunkering to the receiving tank of the LNG-fueled ship. A concept design was resumed for the cargo/fuel tanks in the LNG bunkering vessel and the receiving vessel, as well as for LNG handling systems. Subsequently, the storage tank capacities of the LNG were $4,500m^3$ for the bunkering vessel and $700m^3$ for the receiving vessel. Process dynamic simulations by Aspen HYSYS were performed under several bunkering scenarios, which demonstrated that the boil-off gas and resulting pressure buildup in the receiving vessel were mainly determined by the temperature difference between bunkering and the receiving tank, pressure of the receiving tank, and amount of remaining LNG.

• Journal of Navigation and Port Research
• /
• v.40 no.4
• /
• pp.165-171
• /
• 2016

SEEMP (Ship Energy Efficiency Management Plan) has entered into force since 2013 for the reduction of GHG emission of operating ships. SEEMP guidelines include the hardware modification or installation of energy-saving device on ship. It also includes software based energy-saving technology such as optimum routing, speed optimization, etc. Hardware based technologies are not easy to apply to ongoing vessel due to the operational restriction. Therefore, IT based energy-saving technology was applied and its energy efficiency was evaluated using before and after energy-saving system applied voyage data. SEEMP advises a voluntary participation of EEOI (Ship Energy Efficiency Operation Indicator) use as an indicator of ship energy efficiency operation, and those results were also shown to evaluate the improvement efficiency of energy-saving system.

• Journal of Navigation and Port Research
• /
• v.41 no.4
• /
• pp.181-188
• /
• 2017

In the existing ship sales market, prices determined based on the prices of similar ship types that recently traded. ince the 2008 financial crisis, ship prices have fluctuated, and ship price criteria have become ever more necessary to the imminent value of the ship. Therefore, this research used the hedonic price model to estimate imminent values of ships. In this study, the influence on ship prices was analyzed by the value of each characteristic and an estimated functional formula was. Out of the four models suggested by the hedonic price model, an optimal model was selected with variance inflation factors and a stepwise selection. For this, the influence of determinants of ship prices was analyzed based on actually traded ships and characteristic data. The selected model s the Log-Line model; as a result of regression analysis, eight variables, including DWT, Age, Market Value, Short-Term Charter, Long-Term Charter, Enbloc, Special Survey Due and Builder were to affect the ship price model. This model is expected to be useful for objective and balanced ship price evaluation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.710-719
• /
• 2011

Shipping companies have become interested in the development of strategic ship assets management systems which are implemented for high competitiveness and business rationalization to meet the tough business environment of high oil prices and decrease in cargo. In this paper we introduce a ship assets management system that is suitable for the SAN(Ship Area Network) environment. This system is designed to execute business strategy of ship owners giving consideration to requirements of shipping stakeholders. In addition we have implemented it in a web-based ERP system (SHERP) which separates user interface and business logic. The SHERP is based on STEP and PLIB, which are international standards for data exchange of mechanical devices and parts. It also adopts a ship ontology to manage the ship information and knowledge during its life-cycle. The SHERP will be a concrete example of servitization of shipbuilding, as an information system which is used in ships and ship groups.

• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.661-667
• /
• 2003

There are certain guidelines on the channel design such as domestic guidelines（Korean and japanese, etc.）and international guideline known as PIANC Rules（Permanent International Association of Navigation Congresses Rules）, in the world These rules have considered many factors such as natural conditions, ship maneuverability and geographical features etc. But it is contented toot the area of these rules toot are meant to facilitate the ease of ship-handling is insufficient. To satisfy this point in design process, it is necessary to take into account the difficulties encountered in ship-handling within these inland waterways. Because many vessels are navigating at the same time within these waterways, the specific navigable traffic volume should be considered with regard to the standard process of route designing. It must also be considered with regard to the volume of navigable traffic bemuse of ship-handling difficulty toot arises within the same waterway with varying amounts of traffic volume because toot ship-handling/manueverability is directly influenced by these factors. This paper aims to propose a new approach to the design of standard inland water route considering the traffic volume and the shape of waterway. Also consider the relationship among these factors may affect to the ship-handling difficulties.