Journal of Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회논문집)

Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Effective Working Days in a Harbor Considering Harbor Resonance and Moored Ship Motion

항만공진주기와 선박동요량을 고려한 항만가동율 산정

  • 곽문수 (명지전문대학교 토목공학과) ;
  • 문용호 (대영엔지니어링 기술연구소)
  • Received : 2014.12.04
  • Accepted : 2015.02.09
  • Published : 2015.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

This study proposed an estimation method of allowable wave height for loading and unloading of the ship and evaluation of effective working days considering moored ship motion that is affected by sip sizes, mooring conditions, wave periods and directions. The method was examined validity by comparison with wave field data at pier $8^{th}$ in Pohang New Harbor. The wave field data obtained with wave height of 0.10~0.75 m and wave period of 7~13 s in ship sizes of 800~35,000 ton when a downtimes have occurred. On the other hand, the results of allowable wave height for loading and unloading of the ship in this method have obtained with wave heights of 0.19~0.50 m and wave periods of 8~12 s for ship sizes of 5,000, 10,000 and 30,000 ton. Thus this method well reproduced the field data respond to various a ship sizes and wave periods. And the results of this in Korea are didn't respond to various the ship sizes and wave periods, and we h method tended to decrease in 16~62 percent when have considered long wave, and it is decreased in 0~46 percent when didn't consider long wave than design standards in case of the ship sizes of 5,000~30,000 ton, wave period of 12 s and wave angle of $75^{\circ}$. The allowable wave heights for loading and unloading of the ship proposed by design standards in Korea have found that overestimated on smaller than 10,000 ton. On the other hand, the rate of effective working days considering ship motion at pier $8^{th}$ in Pohang New Harbor reduced in 6.5 percent when compare with the results without considering ship motion.

본 연구는 선박의 크기, 계류조건, 파랑의 주기, 파향 등에 의한 계류선박의 동요량을 해석하고 선박의 하역한계파고 산정 및 항만가동율을 평가하는 방법을 제시한 것이다. 본 방법은 포항신항 제8부두의 파랑관측자료를 이용하여 타당성을 검증하였다. 하역중단 시 파랑관측 자료는 파고 0.10~0.75 m, 주기 7~13 s 이었으며, 이때 계류된 선박은 800~35,000톤 이었다. 그리고 본 방법으로부터 산정된 제 8부두의 하역한계파고는 선박 5,000, 10,000, 30,000톤에 대하여 파고 0.19~0.50 m, 주기 8~12 s로 산정되었다. 본 방법의 결과는 연구대상 선박의 크기가 현지 선박의 크기와 정확히 일치하지는 않아서 파고는 관측치와 다소 차이를 보이지만 주기변화에 따라 하역한계파고를 잘 재현하고 있음을 알 수 있었다. 그리고 파향이 75도 인 경우의 본 방법에 의한 하역한계파고는 현행 항만설계 기준에 제시된 한계파고 보다 장단주기 파를 고려하면 16~62% 감소하였고, 단주기 파랑만 고려하면 0~46%감소하였다. 특히 현행 항만설계기준의 하역한계하고는 10,000톤 이하의 선박에 대해서는 과대 평가되었음을 확인할 수 있었다. 한편, 선박의 동요량을 고려하여 산정된 포항신항 제 8부두의 가동율은 설계기준 파고에 의한 가동율 에 비하여 6.5% 감소하였다.

Keywords

References

  1. Ann, S. P. (1986). Analysis of Moored Ship Motion Using Three Dimensional Source Distribution Method, Master's Thesis, Seoul National University, Seoul Korea (in Korean).
  2. Ann, S. P. and Rhee, K. P. (1987). "The Hydrodynamic Interaction Effects between Two Barges on the Motion Responses", Journal of the Society of Naval Architects of Korea, 24(1), 29-34 (in Korean).
  3. Bruun, P. (1981) Port Engineering, 3rd Edition, Gulf Pub.
  4. Cho, I. S., Kong, K. Y. and Lee, Y. S. (2006). "A Time Domain Analysis of Moored Ship Motions Considering Tsunami Resonant Effects", Proceedings of the Spring Conference on Korean Institute of Navigation and Port Research, Korean Institute of Navigation and Port Research, 30(1), 191-197 (in Korean).
  5. Demirbilek, Z. and Panchang, V. (1998). CGWAVE : A Coastal Surface Water Wave Model of the Mild Slope Equation. Technical Report CHL-98-xx, U.S. Army Corps of Engineers, 6-11.
  6. Jeong, W. M., Ryu, K. H., Beak, W. D. and Choi. H. J. (2011). "Downtime Analysis for Pohang New harbor through Longterm Investigation of Waves and Winds", Journal of Korean Society of Coastal and Ocean Engineers, 23(3), 226-235 (in Korean). https://doi.org/10.9765/KSCOE.2011.23.3.226
  7. Kubo, M., Saitou, K. and Sakakibara, S. (1988). "Application of a strip method to the hull motion of a quay-front moored vessels", Proceedings of the 35th Japanese Conference on Coastal Engineering, Japan Society of Civil Engineers, Vol. 35, 682-686 (in Japanese).
  8. Kubo, M., Saito, K. and Oki, T. (1993). "Approximate Calculation of Ship Motions under the Prevention System of Ship Separation from Quay Wall", Journal of Japan Institute of Navigation, Vol. 89, 15-21 (in Japanese). https://doi.org/10.9749/jin.89.15
  9. Kubo, M. and Sakakibara, S. (1995). "Effects of Long Period Waves Caused by Wave Groups and Harbor Oscillation in Computation of Wharf Operation Efficiency", Proceedings of Coastal Engineering, Japan Society of Civil Engineers, Vol. 42, 931-935 (in Japanese).
  10. Kwak, M., Chung, J., Ann, S. and Pyun, C. (2006). "Estimation of Harbor Operating Ratio Based on Moored Ship Motion", Journal of The Korean Society of Civil Engineers, 26(6B), 651-660 (in Korean).
  11. Kwak, M. S., Moon, Y. H. and Pyun, C. K. (2013). A Study on Analysis of Moored Ship Motion Considering Harbor Resonence, Journal of The Korean Society of Civil Engineers, 33(2), 895-608 (in Korean).
  12. Mollen, W., Ligteringen, H., Lem, J. C. vander, Waal, J. C. M. de (2003). "Behavior of a Moored LNG Ship in Swell Waves", Journal of Waterway, Port, Coastal, and Ocean Engineering, ASCE, 129(1), 15-21. https://doi.org/10.1061/(ASCE)0733-950X(2003)129:1(15)
  13. Pohang Regional Maritime Affairs and Port Office (2010). Field Investigation Report for Swell Analysis and Improvement Measure Making of Downtime in Pohang New Harbor, Report of Pohang Regional Maritime Affairs and Port Office (in Korean).
  14. Sakakibara, S., Saitou, K. and Kubo, M. (2001). "A study on Long-Period Ship Motions in a Harbor Induced by a Resonant Large Roll Motion Under Long-Period Waves", Proceedings of ISOPE, The International Society of Offshore and Polar Engineers, Stavanger Norway, 326-333.
  15. Ueda, S. and Shiraishi, S. (1988). The allowable ship motions for cargo handling at wharves. 27(4), Technical report of port and harbour research Institute, Japan, 3-61 (in Japanese).
  16. Ueda, S., Shiraishi, S., Oshima, H. and Asano, K. (1994). "Proposal of Allowable Wave Height and Wharf Operation Efficiency Based on the Oscillations of Ships Moored to Quay Walls", Proceedings of Coastal Engineering, Japan Society of Civil Engineers, Vol. 41, 916-920 (in Japanese).