• 산업경영시스템학회지
• /
• 제33권2호
• /
• pp.154-161
• /
• 2010

The conning display which is located in the ship bridge shows the various important information such as ship position, ship speed, track data, rate of turn, thruster rpm so on, and is one of the IBSs(Integrated Bridge Systems). In this study, the survey was conducted for ten officers to find the importance and using frequency of the information which were displayed in the conning display. The results showed that the information of drift speed, ship speed, wind direction and wind force, rate of turn, sea water depth, ship position, heading, thrust rpm, alarm, rudder command and angle got high scores and it meant that these information were very important and high frequency of use during the navigation. The optimized contents arrangement in conning display was suggested based on importance and using frequency of information. The experiment using eye-tracking system was conducted to compare the performance time and error rate of nine different scenarios for suggested arrangement display and three other existing displays. The results showed that the suggested arrangement was the best in performance time and error rate. The scenario concerning the direction and speed of wind showed faster performance time and lower error rate than other scenarios. The movement of subject's eye tended to search from the center and to avoid the comer, called 'the comer effect.' It is expected that the results of this study could help for the bridge staff to grasp the sailing information easily and to cope with the given situations promptly.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 추계학술대회
• /
• pp.243-244
• /
• 2009

선박의 표면은 소형선박에서부터 대형까지 매끄럽지 않고 어느 정도의 표면조도(surface roughness)를 가지고 있다. 표면조도는 표면저항과 열전달을 증가시키기 때문에 선박의 설계시 고려해야 될 중요한 설계인자 중 하나이다. 때문에 표면조도에 따른 주위유동에 관한 연구와 조도변화에 따른 유동 및 난류에 대한 연구가 지속적으로 이루어지고 있다. 선박의 표면조도는 선박에서 뿐만 아니라 기계나 항공까지 광범위하게 적용이 가능하며 가용 분야 또한 매우 넓다. 본 연구에서는 레저선박의 표면조도 간격변화에 따른 표면유동에 어떠한 영향을 끼치며 표면조도 영역에 따른 경계층에 대한 실험적 연구를 수행하였다.

• 해양환경안전학회지
• /
• 제27권5호
• /
• pp.557-565
• /
• 2021

경로추종 제어는 대양에서 선박의 자율운항을 위한 가장 기본적인 연구 중에 하나로 여겨진다. 본 연구는 선수미방향, 횡방향 및 회두방향으로 외력이 작용하는 경로추종 제어를 다룬다. 가상의 선박에서 발생하는 항로를 자선이 추종하는 문제를 해결하기 위해서 유도 원리와 백스테핑 기법을 활용하였다. 경로추종 제어에서 가장 중요한 기술 중에 하나는 오차 동역학에 관한 것으로서, 이 개념은 선박의 자동 충돌 회피 및 자동 접안 제어 등과 같은 연구 영역에서도 활용이 가능하다. 유도 원리와 오차 변수의 알고리즘은 수치 시뮬레이션을 통해 증명하였다. 그 결과, 회두각의 오차를 제외한 대부분의 오차 변수는 제어기를 통하여 제로 값으로 수렴하였다. 기존에 근거리 통항선박의 간섭력을 고려한 안전통항거리의 값보다 두 선박 간의 경로추종 제어의 트래킹 오차의 값이 더 작은 점이 가장 흥미로운 결과 중에 하나로 여겨진다. 또한 프로펠러, 핀이나 러더와 같은 엑츄에이터의 손상을 줄이기 위해서는 수렴의 성능과 선박의 안전을 절충하여 적합한 제어 파라미터를 결정할 필요가 있다.

• 한국항해항만학회지
• /
• 제35권3호
• /
• pp.227-233
• /
• 2011

본 연구는 선박용 Night Vision 시스템을 개발하기 위한 선행연구로 2축 지그와 이를 구동할 수 있는 PCU 보드를 제작하고, 추종 및 안정화 제어루틴을 얻는 문제를 다룬다. 개발한 지그와 PCU 보드를 6DOF 모션 시뮬레이터와 결합하여 실험환경을 구축하고 RCGA를 이용하여 지그 모델의 파라미터를 얻고, 추정된 모델과 RCGA를 이용하여 2DOF PID 제어기를 동조한다. 실험과 시뮬레이션을 통해 제안하는 2자유도 PID 제어기의 유효성을 검토한다.

• Journal of Ship and Ocean Technology
• /
• 제11권2호
• /
• pp.1-9
• /
• 2007

This paper describes the design and development of a hovering AUV constructed at Cheju National University and analyses the dynamic performance of the vehicle using simulation programs. The main purpose of this AUV is to carry out fundamental tests in its station keeping, attitude control, and desired position tracking. Its configuration is similar to the general ROV appearance for underwater works and its dimensions are 0.75m*0.5m*0.5m. It has 4 thrusters of 450 watts for longitudinal/lateral/vertical propulsion and is equipped with a pressure sensor for measuring water depth and a magnetic compass for measuring heading angle. The navigation of the vehicle is controlled by an on-board Pentium III-class computer, which runs with the help of the Windows XP operating system. These give us an appropriate environment for developing various algorithms needed for developing and advancing Hovering AUV.

• Journal of Welding and Joining
• /
• 제8권1호
• /
• pp.23-30
• /
• 1990

The robotic welding has been adapted positively in many welding shops forthe purpose of improving the welding efficiency and liberating operators from the severe working atmosphere. But for a large-size structure with thick plates like ship-building and every kind of plants manufacturing, the application of the arc welding robots is not established yet. The reason is assumed that the conventional arc welding robots are not adaptive for multi-pass welding of thick plates whose grooves are not so accurate. As one solution to this problem, a guidance system which uses the welding arc itself as a sensor is largely used. In this study the velocity controller which changes the tip to workpiece distance for regulating the weld proposed. The proportional and integral gain of velocity controller were determined by using the computer simulation of the control system, and the simulation results compared with the experimental ones. It was revealed that the developed control system using the arc sensor principle has a good capability of tracking the weld joint, although some more studies will be needed to refine the model of arc current.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.369-381
• /
• 2021

The International Ice Patrol (IIP) was established after the Titanic collided with an iceberg off the eastern coast of Canada in 1912 and sank, killing more than 1,500 people. Recently, the IIP has analyzed satellite images and provided safe operation information to vessels by tracking the occurrence and movement of icebergs. A large number of recent arctic studies mainly deal with sea ice formed by freezing seawater related to sea routes and resource development. The iceberg that collided with the Titanic was land-based ice that dislodged from a glacier and fell into the sea. The properties of these two types of ice are different. In addition, vessels operating in ice-covered waters such as the Arctic sea have an ice-breaking function or minimum ice-strengthened functions. Ships operating on transatlantic routes including the eastern coast of Canada do not necessarily require ice-strengthened functions. Hundreds to thousands of icebergs are discovered each year near the area where the Titanic sank. In this study, the status of ship-iceberg collision accidents was investigated to provide useful information to researchers, and the physical and mechanical characteristics of icebergs were investigated and summarized.

• 융합신호처리학회논문지
• /
• 제11권4호
• /
• pp.338-344
• /
• 2010

선박 블록의 용접 공정에서는 용접선의 양쪽 끝이 벽에 의해 막혀있는 경우가 많다. 본 연구에서는 이러한 벽이 있는 환경에서 맞대기 용접의 자동화를 위한 용접선 검출 시스템을 개발하였다. 용접선 검출 시스템은 벽에서 캐리지의 위치를 측정하고, 초층의 용접선을 검출하게 된다. 시스템은 레이저 변위센서와 초음파센서로 구성되어 있다. 레이저 변위센서는 모터에 의해 회전 왕복 운동하며 용접 모재까지의 거리를 측정하게 되고, 초음파센서는 양쪽 벽면까지의 거리를 측정한다. 초음파센서로 측정된 거리정보를 활용하여 용접선의 X(주행)좌표와 용접 시작 및 끝 위치를 판별한다. 그리고 레이저 변위센서에 의해 측정된 거리정보와 센서의 자세정보를 활용하여 용접선의 Y(위빙), Z(높이)좌표를 검출하게 된다. 용접선 검출 시스템은 용접 캐리지와 독립적인 구동을 위해 DSP를 이용하여 별도의 제어기를 구성하였다. 용접 도중 용접선 검출 시스템과 용접 토치(Torch)와 간섭을 피하고, 측정 불가능한 구간이 발생하지 않도록 용접선 검출 시스템을 캐리지의 양쪽에 부착할 수 있게 설계하였다. 최종적으로 용접 캐리지에 부착하고 실험을 수행하여 개발된 용접선 검출 시스템의 효용성을 확인하였다.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.752-761
• /
• 2013

A new gun fire control system has been developed for the Korean next generation frigate class. The engineering requirement was far more tightened than the PKG-A class for the firing range availability and gun control function since 5 inch gun is adopted for the new ship. We mention about the principal technologies required to build a generic gun fire control system and proposed methods for the new gun fire control system. The new system has been designed based on the proposed methods in order to satisfy the requirement and functionality has been proved to be acceptable through the sea trial by Korean navy.

• 대한조선학회논문집
• /
• 제57권3호
• /
• pp.140-151
• /
• 2020

It is important to identify the location of ship hull blocks with exact block identification number when scheduling the shipbuilding process. The wrong information on the location and identification number of some hull block can cause low productivity by spending time to find where the exact hull block is. In order to solve this problem, it is necessary to equip the system to track the location of the blocks and to identify the identification numbers of the blocks automatically. There were a lot of researches of location tracking system for the hull blocks on the stockyard. However there has been no research to identify the hull blocks on the stockyard. This study compares the performance of 5 Convolutional Neural Network (CNN) models with multi-view image set on the classification of the hull blocks to identify the blocks on the stockyard. The CNN models are open algorithms of ImageNet Large-Scale Visual Recognition Competition (ILSVRC). Four scaled hull block models are used to acquire the images of ship hull blocks. Learning and transfer learning of the CNN models with original training data and augmented data of the original training data were done. 20 tests and predictions in consideration of five CNN models and four cases of training conditions are performed. In order to compare the classification performance of the CNN models, accuracy and average F1-Score from confusion matrix are adopted as the performance measures. As a result of the comparison, Resnet-152v2 model shows the highest accuracy and average F1-Score with full block prediction image set and with cropped block prediction image set.