• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.75-75
• /
• 2017

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.74-74
• /
• 2017

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.3
• /
• pp.227-234
• /
• 2008

The number of marine accidents have been decreased since various equipments for navigation control have been introduced to the marine vessels. However, disastrous marine accidents such as ship collisions are occurred more frequently. Therefore, IMO(International Maritime Organization) is enforcing the design requirement of structural strength for marine vessel. Also EU countries are developing new design methodologies and design tools to suggest the design guidance which can minimize the damage of commercial vessels in case of marine collision accidents. In this study, an integrated design system for the safety assessment has been presented to enhance the safety of damaged ships in marine collision accidents. The architecture of system is described by use-cases and IDEF functional analysis. Then an integrated system for safety assessment of damaged ship which is considering both damage stability and structural safety has been developed to support the ship design in early stage.

• Journal of Navigation and Port Research
• /
• v.43 no.5
• /
• pp.310-319
• /
• 2019

With the recent increase in the volume of liquid cargo transportation, there is a need for STS( Ship To Ship) globally. In the case of the STS mooring, the safety assessment should be conducted according to other criteria because mooring is different from the general mooring at the quay, but there is no separate standard in Korea. Thus in this study, STS mooring simulation and sensitivity analysis using OPTIMOOR program, the numerical analysis program, was conducted to identify the characteristics of the STS mooring. The target sea modeled the Yeosu port anchorage in Korea and the target ship was selected as the case of VLCC (Very Large Crude Oil Carrier)-VLCC. Through the numerical simulation and sensitivity analysis, the characteristics of STS mooring were identified. Also based on these results, we focused on establishing the standard for STS mooring safety assessment. Numerical simulation results show that the STS mooring safety can be changed according to a ship's cargo loading condition, pre-tension of mooring line, sea depth, encounter angle with the weather, and the weather condition. Additionally, the risk matrix is prepared to establish the safe external force range in the corresponding sea area. This result can be used to understand the mooring characteristics of STS and contribute to the revision of mooring safety assessment criteria.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.783-788
• /
• 2021

Although the Korean government (Ministry of Ocean and Fisheries) and related organizations are enforcing many policies to improve the marine safety of vessels with weak safety management, the effectiveness of each policy is deficient due to the lack of a risk assessment method for ship safety management. Most previous studies in Korea of the risk assessment of ships only dealt with fragmentary risks of individual marine accident risks, so a new assessment method for comprehensive marine accident risk is needed. Examples of comprehensive risk assessments for ship safety management are the selection method for inspection targets by the Port State Control and the Norwegian Maritime Authority. In this study, indicators for the comprehensive risk assessment of ship safety management were developed for and applied to coastal/offshore fishing vessels that occupy a high proportion of the registrations and marine accidents in Korea. As a result, the risk of each ship was confirmed quantitatively, and a ranking of the weakness factors for ship safety management was identified.

• Journal of Ship and Ocean Technology
• /
• v.5 no.3
• /
• pp.1-13
• /
• 2001

Present-day rules and regulations for the design and construction of ships are almost without exemption of a prescriptive and deterministic nature. Often it is argued that this situation is far from ideal; it does no right to the advances, which have been made during the past decades in engineering tools in marine technology, both in methodology and in computational power. Within IMO this has been realized for some time and has resulted in proposals to use Formal Safety Assessment(FSA) as a tool to improve and to modernize the rule making process. The present paper makes use of elements of the FSA methodology, but instead of working towards generic regulations or requirements, a Risk Assessment Approach, not unlike a 'safety case'; valid for a certain ship or type of ship is worked out. Delft University of Technology investigated the application of safely assessment procedures in ship design, in co-operation with Anthony Veder Shipowners and safety experts from Safely Service Center BV. The ship considered is a semi-pressurized-fully refrigerated LPG carrier. On the basis of the assumption that a major accident occurs, various accident, scenarios were considered and assessed, which would impair the safety of the carrier. In a so-called Risk Matrix, in which accident frequencies versus the consequence of the scenarios are depicted, the calculated risks all appeared lo be in the ALARP('as low as reasonable practicable') region. A number of design alternatives were compared, both on safety merits and cost-effectiveness. The experience gained with this scenario-based approach will be used to establish a set of general requirements for safety assessment techniques in ship design. In the view that assessment results will be most probably presented in a quasi-quantified manner, the requirements are concerned with uniformity of both the safety assessment. These requirements make it possible that valid comparison between various assessment studies can be made. Safety assessment, founded on these requirements, provides a validated and helpful source of data during the coming years, and provides naval architects and engineers with tools experience and data for safety assessment procedures in ship design. However a lot of effort has to be spent in order to make the methods applicable in day-to-day practice.

• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.70-76
• /
• 2011

Industrial accident frequency in small- and medium-sized ship-building plants is much higher than that of large-sized ones so that safety management activities should be different. In that sense, voluntary hazard assessment would be helpful for small- and medium-sized plants. However, conventional hazard assessment items and methods had some problems that discouraged voluntary participation of plants concerned. This study aimed to develop a new model for small- and medium-sized ship-building plants that can promote and encourage voluntary hazard assessment activities. For that purpose, ship-building process was assumed as a sequence of phases, and accident characteristics were compared with them. From that result, relative weights of accident factors including ship-building phases, accident types, occupational category, accident-induced objects, and hazardous items were determined with accident frequency data and with the help of expert groups. Therefore, for web-based integrative computer programming, a plain but accident data-dependent model was developed, with an additive function for related agencies that want to collect assessment results. It is expected that this model would help small- and medium-sized ship-building plants that wanted not only simple checklists but also effective assessment and management guidelines.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.5 s.149
• /
• pp.619-629
• /
• 2006

The safety assessment of the structure related to people has become the most important part in the process of the design. Especially, in the case of a ship, as regulations about the safety of passengers and the pollution in the ocean are strictly reinforcing, the safety assessment has become the most important part in the process of the design. In this paper, we suggested network-based simulation system framework using HLA (High Level Architecture) among many kind of simulations to assess the safety of the ship. In addition, the visualization method which is composed of graphic user interface for ship modeling and the visualization of ship motion is presented.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.3
• /
• pp.343-350
• /
• 2009

Recently ship safety regulations are being reinforced to improve maritime safety and to prevent maritime pollution by International Maritime Organization. It means that the regulation is becoming more proactive rather than reactive. In the mean time, design philosophy is also moving from rule based design to performance and simulation based design. In this paper, a study on practical application of the damage safety assessment system is carried out. The damage stability and the survivability of a cargo ship that was designed based on current regulation is investigated using performance based design tools in order to improve the safety of the design and verify the performance of the developed damage safety assessment system. To do this, damage scenarios is established and the characteristics and geometry the cargo ship is modeled. A new design alternative is proposed with small change in the internal arrangement based on safety evaluation results of the current design.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.283-289
• /
• 2006

This study is a preparation for the application of FSA (Formal Safety Assessment) to the fire safety of ships. FSA is the new-fashioned methodology proposed to prevent ships from the accidents. To make a base of the fire safety assessment about ship's fire protection design and Classification Society rule, statistical informations for the fire safety engineering are investigated. From results, the necessity of new criterion for ship's fire safety design, the need to study the human behavior in the evacuation from fire, and the development of new fire progress model considering special situations in ships are acknowledged.