• 제목/요약/키워드: Ship Inspection

검색결과 277건 처리시간 0.02초

해도의 사용실태 조사와 개선방안에 관한 연구 (A Study on the Present Status and Improving Measure of Sea Charts)

  • 나송진;정재용;박진수
    • 한국항해학회지
    • /
    • 제24권1호
    • /
    • pp.1-12
    • /
    • 2000
  • The ships over the certain navigation area or her length are required to carry charts under the relevant laws. Charts are indispensible to the ships and fishing vessel, because their crew should know the water depth and location of obstacle in order to avoid danger in the navigation and fishing area. But it was found that many ships do not carry proper charts onboard according to the research marine accidents files of marine accident inquiry agency, and questionnaire survey. Consequently, many ships run aground on the coast and port. This study examined the present status of the coastal ship and the fishing vessels, and explained some problems in the aspect of the covering area, the place, the number of the selling agent and adjoining chart, as well as the geographical and traffic density, the crew on board the ship's characteristics, and so on. In this study we propose the way to solve the problem. firstly, the category of the fishing vessel which should carry the chart on bard under the related laws are required to be lowered to 10 gross tons. Besides a ship inspector should examine if the charts covering the area where to navigate even when the temporary inspection is done are carried on board property. Secondly, the inspection body or the controlling office of ship's entry and departure should check throughly whether the ships concerned carry the chart on board. Thirdly the fishing vessels should used the fishing charts, and the body concerned should train the offices about how to use chart, especiany the difference between Tokyo datum and WGS-84 datum. Fourthly the customized chart such as an atlas like a map, a calenda-type chart, a small chart, as a coated chart needs to be publish for the safety of small ship and fishing vessel. Fifthly, it is advisable to draw a recommended course in the route where the coastal navigate mainly and in the narrow channel, The adjoining area should be improved, as well as the qualify of the chart paper. Sixthly, publication of additional new chart in the southern part of East Sea, the eastern part of South Sea, the western part of South Sea and middle part of Yellow Sea near Incheon port should be thought over. Seventhly, the number of chart selling agent should be increased for the sake of purchaser in proportion to the number of port, and small correction of charts in selling agent must be carried out completely.

  • PDF

45노트급 고속정의 초기선형 개발과 저항성능에 관한 연구 (A Study on the Initial Hull Form Development and Resistance Performance of a 45 Knots Class High-Speed Craft)

  • 김주남;정우철;박제웅;김도정
    • 한국해양공학회지
    • /
    • 제20권1호
    • /
    • pp.32-36
    • /
    • 2006
  • The initial hull form of a 100 tan, 45 knot class high-speed craft is newly developed. The resistance performances are investigated using a model test at high speed in a circulating water channel. The effect of the initial trim is studied together. Wave patterns are observed to clarify the relationship between the resistance performance and the wave characteristics. It can be found that the initial trim plays a role in increasing the resistance performance above a certain velocity.

선박 건조 과정에서 발생하는 치수 오차 분석을 위한 가중 포인트 정합 방법 (A Weighted Points Registration Method to Analyze Dimensional Errors Occurring during Shipbuilding Process)

  • 권기연
    • 한국CDE학회논문집
    • /
    • 제21권2호
    • /
    • pp.151-158
    • /
    • 2016
  • It is important to analyze dimensional errors occurring during shipbuilding process. A ship is constructed by assembling blocks and installing outfits in assembled ship structure. Blocks and outfits have a main direction that has greater importance than other directions from the view point of dimensional error. Therefore, a main direction should have a greater weighting factor than other directions in order to achieve meaningful inspection results. In this paper, a modified point registration method based on iterative closest point (ICP) is proposed. In this method, a user determines one or two main directions among x, y, and z directions, and then each main direction is made to have a greater weighting factor than other directions. For points registration, mapping between measured points and design points are performed by the modified ICP in which weighting factor assigned to each main direction is considered.

살물선의 화물창 덮개부 수밀 건전성에 대한 공식안전평가의 적용 (An Application of FSA Methodology to Hatchway Watertight Integrity of Bulk Carriers)

  • 이은창;이재옥;여인철;양영순
    • 대한조선학회논문집
    • /
    • 제37권3호
    • /
    • pp.69-77
    • /
    • 2000
  • 본 논문은 IMO가 주관하는 공식안전평가 방법의 일부로서 살물선의 화물창 덮개부 수밀 시스템에 적용한 결과이다. 화물창 덮개부 수밀 시스템에 큰 위험을 주는 위해요소는 설계기준을 넘어선 선박의 운항으로 해치 코밍에 고장을 일으키는 것과 빈약한 유지보수와 검사로 인해 수밀 장치에 고장을 일으키는 사고인 것으로 나타났다. 위험해석(risk analysis)을 통해 현재의 경우 한 선박이 1년간 운항하였을 때 약 6만불의 위험이 있다고 계산되었다. 이러한 위험을 감소시키기 위해 제안된 위험통제방안 중 RCO 1(Advanced system directly related to hatchway security)을 적용함으로써 위험을 약 3만불 감소시킬 수 있었다. 또한 비용편익분석을 실시하여 위험통제방안이 비용편익 측면에서도 효과적임을 보였다.

  • PDF

A Design-Decision Support Framework for Evaluation of Design Options in Passenger Ship Engine Room

  • 김수웅
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
    • /
    • pp.277-280
    • /
    • 2006
  • Most real world design evaluation and risk-based decision support combine quantitative and qualitative (linguistic) variables. Decision-making based on conventional mathematics that combines qualitative and quantitative concepts always exhibit difficulty in modelling actual problems. The successful selection process for choosing a design/procurement proposal is based on a high degree of technical integrity, safety levels and low costs in construction, corrective measures, maintenance, operation, inspection and preventive measures. However, the objectives of maximising the degree of technical performance, maximising the safety levels and minimising the costs incurred are usually in conflict, and the evaluation of the technical performance, safety and costs is always associated with uncertainties, especially for a novel system at the initial concept design stage. In this paper, a design-decision support framework using a composite structure methodology grounded in approximate reasoning approach and evidential reasoning method is suggested for design evaluation of machinery space of a ship engine room at the initial stages. It is a Multiple Attribute Decision-Making (MADM) or Multiple Criteria Decision Making (MCDM) framework, which provides a juxtaposition of cost, safety and technical performance of a system during evaluation to assist decision makers in selecting the winning design/procurement proposal that best satisfies the requirement in hand. An illustrative example is used to demonstrate the application of the proposed framework.

  • PDF

실습생의 승선실습 교육의 만족도에 관한 실증연구 -기관계열 실습생의 실습선 교육을 중심으로- (An Empirical Study on the Satisfaction of Shipboard Training for Marine Engineering Part Cadets: The Case of Korea Maritime University)

  • 김성국
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제22권2호
    • /
    • pp.146-173
    • /
    • 1998
  • It is one of the most important factors Seafarers Education Quality Assurance and management in Higher Maritime Education Institution. The educational process and result of Higher Maritime Educational Institution. The educational process and result of Higher Maritime Educational Institution should be evaluated according to the 1995 Amendments to the International Convention on Standards of Training Certification and Watchkddping for Seafares(STCW) 1978. Actuall above-mentioned evaluation is deemed to make foundation in order to enhance the efficiency of shipboard education by surveying the satisfaction of shipboard training for Marine Engineering part cadets by the group. In this paper we carried out the questionnaire survey to study stisfactory value and the reason of dissatisfaction of 89 cadets being trained on board the Training Ship in Maritime College of Korea Maritime University The results were calculated by frequency and percentage; the significance of difference among Department groups like Marine Engineering Maritime polic and Ship Operating Systems Engineering Engineering was analysed by $x^2$ inspection.

  • PDF

선박의 항만국검사대비 기름기록관리에 관한 실무적용 연구 (A Study on the Oil Record Book Guide Line for the PSC Inspection)

  • 권기생
    • 선박안전
    • /
    • 통권31호
    • /
    • pp.81-96
    • /
    • 2011
  • The transportation of oil has increased due to the growth of marine industries and oil refineries. Oil residues and waste discharged to the ocean has increased due to accidental and/or intentional discharges. The International Marine Organization(IMO) has made compulsory that every oil tanker of 150 gross tonnage and above and every ship of 400 gross tonnages other than tankers and above should be provided with an oil record book. The entries in the oil record book should be made in accordance with the IMO guidelines. Specifically, engine room generated oil residues should be recorded in the oil record book from January 1, 2011. Also, the developed IMO guideline should be added for the prevention of dispute with the Port State Control Officers and(or) Tanker Vetting Inspectors. This oil record book will be in operation and of valued assistance to the marine officers, according to the IMO policy for the prevention of the waste oil and the oil mixtures from the machinery space. For the convenience, added Code & Item No. list, FAQs and reviewed and revised Examples.

  • PDF

선박운항시스템에 있어서 인적요소(Human Factors)의 조사방법론에 관한 고찰 (A Study on the Methodology for Analysing Human Factors in Ship Operating System)

  • 황병호;이종인
    • 한국항해학회지
    • /
    • 제24권1호
    • /
    • pp.23-34
    • /
    • 2000
  • The human error or error involved with human is still the major portion of the causes of marine casualties and attracting a great concern in ship operation. However, there are not so many researches conducted to investigate or develop methodologies for analyzing such causes of human error in maritime industry, which may be caused by the variety of factors affecting the performance of ship operation and the characteristics of human being. This paper aims to study the methodologies used in investigating human factors or errors in maritime field through the investigation of researches performed so far. The methodology for human factors can be usually classified into one of three types; descriptive studies, experimental research and evaluation research. Also there are many different kinds of applied researches for some specific subjects. Prior to the investigation of the root cause of marine accident related with human error, clear concept of the human factors and systematic taxonomy shall be established. Moreover, it is very important considerations in case of casualty inspection on human factors that the inspector on the accident shall have adequate knowledges, understandings on the concept of human factors including the way of research more than those of methodologies and techniques.

  • PDF

한국선급 입급선 항만국통제의 출항정지 분석에 관한 연구 (A Study on Ships of KRS Registered the analyses of Detentions for Port State Control)

  • 임명환;이창현;신호식
    • 수산해양교육연구
    • /
    • 제28권1호
    • /
    • pp.34-46
    • /
    • 2016
  • This study analyzes inspection results of ships by Port State Control. Particularly, this research focuses on a detention trend of vessels that registered to Korean Register of Shipping. In order to conduct this research, we have searched 170 ships that got a detention with a Code-30 within recent 46 months period. The deficiencies of the detentions are inspected by ship types, ship years, flags, ports inspected, and criteria. Moreover, we categorized the deficiencies for the detentions into 17 types for internal and external inspections. As the results of the comparison study, bulk and general cargo carriers dominate the portion of detentions by almost 66 percent. Self-induced detention due to a lack of preparation by crews and company support are the main reasons of repeated detentions from the same type ships. Ships between six and ten years old show the lowest detention rate by 4 percent whereas ships less than five years old generate the highest detention rate by 22 percent. The main categories of the detentions from ships less than 5 years old are a lack of documentation and certification, and the clues support our opinion that owners and crews may neglect to prepare the inspections because their strong confidence for the ship condition due to young ship age. As a result of a great effort of Korean government and shipping companies to reduce a detention rate, the detention rate has been recently reduced to 0.3 percent. The results also require companies with the flag of convenience ships to spend more effort to reduce the detention rate, too. We expect that using social networking service by Korea Register will lower the detention rate by sharing relevant information real-time to ships and owners.

수중레저선박 스크류망 제도개선의 필요성과 구체적인 제안 (Study on the Necessity and Specific Recommendations for Enhancing the Legal Requirements for Underwater Recreational Vessel Propeller Guards)

  • 이정수;민정탁;장호윤
    • 해양환경안전학회지
    • /
    • 제30권2호
    • /
    • pp.226-232
    • /
    • 2024
  • 우리나라의 스쿠버다이빙 중 입·출수시 선박의 스크류에 신체를 부딪쳐 사망하는 사고가 매년 반복적으로 발생하고 있다. 이에 우리나라는 관련 사고 저감과 안전관리방안 마련에 대한 필요성이 대두됨에 따라 스크류망의 설치와 관리에 관한 규정을 마련하였으나, 국내 법규상 명확한 제작 규정이 없어 설치기준이 모호하고, 점검항목이 외관·고정상태에 국한되어 있어 다이버의 스크류 사고의 안전이 담보되지 않은 상황이다. 이에 따라 본 연구는 현재 스크류망의 설치 및 점검에 대한 법적 요건을 구체화하기 위한 연구를 진행하였다. 이를 위하여 국내·외 스크류망의 현황과 안전기준과 관련된 실태와 법적 요소를 검토를 통해 문제점을 진단하였고, 이를 바탕으로 그에 대한 구체적인 개선점을 발굴하여 설치와 점검을 위한 제도개선(안)을 제시하였다. 스크류망의 설치기준은 크기와 재질에 관한 내용을 명확히 제시하였으며, 점검기준은 외관, 고정상태, 재질상태 등을 제안하였고, 이를 판단하기 위한 명확한 지표 등을 제안하였다.