• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제35권1호
• /
• pp.101-106
• /
• 2012

Ship handling simulator is a virtual ship navigating system with three dimensional screen system and simulation programs. FTS simulation can produce theoretically infinite experiment tests without time constraint, but which results in collecting determinstic observations. RTS simulation can collect statistical observations but has disadvantage of spending at least 30 minutes for a single experiment. The previous studies suggested that the number of experiment conditions to be tested could be reduced to obtain random data with RTS simulation by focusing on highly difficult experiment condition for ship handling. It has the limitation of not estimating the distribution of ship handling difficulty for the route. In this paper, similarity and clustering analysis are suggested for reduction methodology of experiment conditions. Similarity of experiment conditions are measured as follows: euclidean distance of ship handling difficulty index and correlation matrix of distance differences from the designed route. Clustering analysis and multi-dimensional scaling are applied to classify experiment conditions with measured similarity into reducing the number of RTS simulation conditions. An empirical result on Dangin harbor is shown and discussed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.35-40
• /
• 2006

For the maritime traffic safety assessment of vessels navigating in harbor or fairway, simulation techniques by using shiphandling simulator system have been traditionally used. When designing the simulation experiments and when analyzing the simulation results, however, there has been a little systematic method. Ship-handling simulations can be regarded as a kind of statistical experiment by using ship-handling simulator system, which means that shiphandling simulation conditions should be designed statistically and that the simulation results should be statistically analyzed as well. For the safe and economic design of harbor and fairway, reasonable decisions based upon the scientific analysis of shiphandling simulation results are indispensable. In this paper, various statistical methods, such as Bayes theorem, statistical hypothesis testing, and probability distributions, are reviewed with a view to application to maritime traffic safety assessment. It is expected that more reasonable decisions on harbor and fairway design can be made from shiphandlers' view point by using statistical methods.

• Journal of the Korea Society for Simulation
• /
• 제11권4호
• /
• pp.81-89
• /
• 2002

Several full mission simulators have been installed since about 10 years ago in Korea. The newly established Marine Simulation Training and Research Center at Korea Maritime University has played a key role for education and training of both cadets and in-service officers trainees, and for research on Korea ports such as Jeju international cruise port, Ulsan SBM and Kwangyang container port and many others. This study mainly focuses maritime education and training on the ship handling simulation and the bridge resource management conducted by Korea Maritime University.

• Proceedings of the Korea Society for Simulation Conference
• /
• 한국시뮬레이션학회 2002년도 춘계학술대회논문집
• /
• pp.15-20
• /
• 2002

Most of marine casualties are caused by not only wrong operation of equipments but also lack of knowledge about navigational equipments or systems. But we can say these casualties result from lack of ship handling skill or lack of situational awareness. This study aims to investigate the recent status of SHS and suggest several recommendations such as teaching skills, evaluation skill, etc. to make more efficient crew training with SHS (ship handling simulator).

• Korean Journal of Computational Design and Engineering
• /
• 제16권3호
• /
• pp.227-235
• /
• 2011

Ship handling simulator should have capabilities of calculating ship motions (heave, pitch, and roll) at given sea state and displaying the calculated motions through a real-time 3D visualization system. Motion solver of a ship handling simulator generally calculates those motions in addition to position for an own ship, a main simulation target, but provides only position information for traffic ships. Therefore, it is required to simulate real-time traffic ship and buoy motions coupled with ocean waves in a ship handling simulator for the realistic visualization. In the paper, the authors propose a simple dynamics model by which ship and buoy motions are calculated with the input data of wave height and discuss a method for the implementation of a ship and buoy motions calculation module.

• Proceedings of KOSOMES biannual meeting
• /
• 해양환경안전학회 2004년도 추계학술발표회
• /
• pp.57-62
• /
• 2004

A mariner feels the ship-handling difficulty when the vessel onboard passes through breakwater. Until now, there is no a layout design of breakwater to take into account the ship-handling difficulty for the mariner. 11Us paper reproduced this situation which ship-handling is difficult by using marine traffic flow simulation, and it applied to Environmental Stress Model as the assessment model which is a quantitative model for evaluating the difficulty of ship-handling arising from restriction in maneuvering water areas and arising from traffic congestion The results are as follows. (1) The layout change of breakwater has little influence for reduction of ship-handling difficulty in the areas of vessel traffic volume. (2) In the situation of same breakwater width, difference of ship speed has an effect on decrease of ship-handling difficulty. (3) Expansion of breakwater width decreases ship-handling difficulty quantitatively.

• Journal of Navigation and Port Research
• /
• 제36권7호
• /
• pp.571-575
• /
• 2012

Berthing and unberthing maneuver is essential work for marine pilots and securing the safety against risks during the maneuver is more important than anything else. Moreover, the maneuvering environment in ports and harbors has changed rapidly and got worse due to development of a new port, the advent of a new type or large-sized ship, and the rapid increase in harbor traffic. As one of measures taken to cope with such changes in the maneuvering environment and for each pilot to improve his own maneuvering ability, this paper developed laptop-based ship-handling simulator which is readily available anytime and anywhere. This paper is to develop a conning display for ship's maneuvering and electronic chart based display widely used nowadays to represent a model ship's movement. The displays were arranged appropriately considering pilot age, easy handling by mouse, using a maximum screen, proper arrangement of rudder, engine, thruster, tug etc and representation of information. Up to now thirteen (13) model ships were developed based on real-ship, whose mathematical model is Japanese MMG & pilots' low speed maneuver.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2022년도 춘계학술대회
• /
• pp.306-307
• /
• 2022

Recently, in the process of developing, verifying, and upgrading the e-Navigation service and autonomous navigation system, there is an increasing demand for inter-working with a ship-handling simulator that can simulate actual maritime traffic conditions. In this paper, to develop a ship-handling simulation system based on actual maritime traffic conditions, a simulation server was built, received information on the actual maritime traffic conditions from the e-Navigation linkage system, and changed to information for operating the ship-handling simulator. In order to provide simulation images to users, 3D shape modeling for trade ports, coastal ports in Korea and major type of ship were performed. The developed system will be used for the advancement of e-Navigation service, development and verification of autonomous navigation systems, by enabling simultaneous processing of more than 10,000 ships and allowing users to simulate actual maritime traffic conditions in the desired area.

• Journal of Navigation and Port Research
• /
• 제32권3호
• /
• pp.207-213
• /
• 2008

Ship-handling simulation system has been used for maritime traffic safety assessment for harbor and fairway. There exist various environmental conditions under which ship may navigate along a fairway or in harbor. Due to the time and budget limitations, however, ship-handling simulations are usually carried out for very limited number of environmental conditions. In this paper, statistical method for effective and systematic determination of real time simulation conditions is suggested and applied to the maritime traffic safety assessment problems. In the empirical study, the principal component analysis method and the concept of empirical cumulative distribution function are suggested to estimate synthetic navigational difficulty and to select simulation conditions which would impose high difficulty on shiphandling.

• Journal of Navigation and Port Research
• /
• 제32권5호
• /
• pp.321-326
• /
• 2008

Recently the large sea bridge's construction crossing harbor and main ship's route have been propelled in the domestic so that it is active for the smoothly traffic flow of inland transportation and road user's convenience. However, it can bring about the trouble to ensure marine traffic safety if it is built that sea bridge's construction sets to an economy principle in the extension of the land road system. We're adopting Ship Handling Simulation in representative method for the influence assessment of marine traffic safety and danger elements beforehand. This research attempts to show the problems through the comparison and analysis of the reports relating to the sea bridge construction for 4 organization possessing Ship Handling Simulation. Finally, We offer the necessity of standardization on performing and assessment method of simulations.