• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.192-198
• /
• 2013

This paper presents the stabilization and design of a pan-tilt control part for the directional pan-tilt system for shipboard directional equipment. In order to control each control axis with compensation for ship motion, the 2 degree of freedom(2DOF) PID controller is designed and its parameters are tuned using a real-coded genetic algorithm(RCGA). Simulation demonstrates the effectiveness of the 2 DOF PID controller tuning.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.112-118
• /
• 2013

This paper reports the results of a comparative study on rudder performance between the steel rudders that have been used in coastal angling fishing boats in the 20-GT class and the newly developed FRP composite material rudders. In order to compare the rudder performances of these two types, a sea trial test was carried out to investigate the speed performance, fuel consumption, and ship's turning ability. The results showed that the sea trial performance of the FRP composite rudder was better than that of the steel rudder type in terms of the sea speed, fuel consumption rate, and turning ability.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.4
• /
• pp.48-55
• /
• 2019

With recent rapid increases in the power generation capacity of offshore wind power generators, reliable structural analysis of the large-scale infrastructure needed to install wind power generators at sea is required. Therefore, technology for heavy marine equipment such as barges and excavation equipment is needed. Under submarine conditions, rock drilling technology to install the substructure for offshore wind pile excavation is a very important factor in supporting a wind farm safely under dynamic loads over periods of at least 20 years. After investigating the marine environment and on-site ground excavation for the Saemangeum offshore wind farm, in this study we suggest.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.344-347
• /
• 2005

The cylinder liners of low speed engine are one of a important equipment in merchant ship. But, the precision machining method of cylinder liner is not developed sufficiently. This paper shows a new honing method using by CBN honing stones.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.3
• /
• pp.167-176
• /
• 2000

The -advent of electronic navigation equipment and trustworthy computer which provides people with convenience made the management system by one-man bridge operation or the least people who are needed possible through the integration of communication network with various navigation equipment and related institution. One of the most needed ultra-modem navigation device for a mate, ECDIS is a core equipment for navigation in ENS that notifies peril to mate as well as supervises all tasks in hydrographical chart, voyage planning, course monitoring and voyage recording. We should make coast and ocean voyage planning first, for the secure navigation which is considering the course circumstances and next, for the reduction of voyage dates in economical aspect. There needs a thoughtful consideration about the feature of the ship itself and the course with weather condition in taking up the course and also we have to take into accounts about appropriate distance between ships. Considering the essential conditions of ECDIS the indispensable device in the future, it was developed the basic principle for voyage planning algorithm for officer and programmed to real implementation available. In this paper including most of the requirements in ECDIS performance standard I mentioned about such a basic and a core Principle with real application by using the Visual C++ programming language. The voyage plan includes the function that indicate and modifies all the way points in the course from department port to arrival port with erasing the wrong way points. Also, it provides in a document form that shows ETA at glance in average speed sailing.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.1
• /
• pp.101-107
• /
• 2008

According to the existing research result on the seabed organic sediment, pollutants from the land and the sea contaminate the coastal water and sediment on the seabed. To tackle this problem, we need to dredge organic sediment. In the present paper, the development of removing system of seabed sediment by the difference of water head is researched by experimental method. For the validation of the decompression system, computations for validation are carried out for sediment removing equipment. The performance of inhalation equipment is analysed by some model tests.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.12-17
• /
• 2010

The oil tanker ship over 150GRT must equip oil content meter which satisfy requirements of revised MARPOL 73/78. Online measurement of oil content in complex samples is required to have fast response, continuous measurement, and satisfaction of ${\pm}10ppm$ or ${\pm}10%$ error in this field. The research of this paper is to develop oil content measurement system using analysis of light transmission and scattering among turbidity measurement methods. Light transmission and scattering are analytical methods commonly used in instrumentation for online turbidity measurement of oil in water. Gasoline is experimented as a sample and the oil content approximately ranged from 14ppm to 600ppm. TSK Fuzzy Model may be suitable to associate variously derived spectral signals with specific content of oil having various interfering factors. Proposed Parallel TSK Fuzzy Model is reasonably used to classify oil content in comparison with other models. Those measurement methods would be effectively applied and commercialized to oil content meter that is key components of oil discharge monitoring control equipment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.421-423
• /
• 2010

This paper is the study of NMEA-0183 based BNWAS. The BNWAS is being used currently in the ship had difficulty in monitoring. NMEA-0183 based BNWAS equipment will work with existing equipment. The monitoring of attendant risks and the effective emergency response can be. All subsequent nmea-based equipment integration can be developed into a system that can manage.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.499-505
• /
• 2005

Underwater explosion shock response analysis of a nonlinear double resiliently mounted equipment on a MIL-S-901D Large floating Shock Platform(LFSP) was carried out using LS-DYNA3D/USA. As a nonlinear double resiliently mounted equipment, real main engine module of naval ship was considered, where the engine, bearing, and base frame including sound enclosure were treated as rigid bodies with six degrees of freedom. The nonlinear effects of resilient mounts on its shock response characteristics were examined, and the usefulness of our suggested method was also confirmed comparing with calculation results by the equipment maker.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.3
• /
• pp.429-438
• /
• 2021

The mandatory installation of the ECDIS (Electronic Chart Display and Information System) became an important navigational equipment for navigation officer. In addition, ECDIS is a key component of the ship's digitalization in conjunction with various navigational equipment. Meanwhile, cyber-attacks emerge as a new threat along with digitalization. Damage caused by cyber-attacks is also reported in the shipping sector, and IMO recommends that cybersecurity guidelines be developed and included in International Security Management (ISM). This study analyzed the cybersecurity hazards of ECDIS, where various navigational equipment are connected. To this end, Importance-Performance Analysis (IPA) was conducted on navigation officer using ECDIS. As a result, the development of technologies for cyber-attack detection and prevention should be priority. In addition, policies related to 'Hardware and Software upgrade', 'network access control', and 'data backup and recovery' were analyzed as contents to be maintained. This paper is significant in deriving risk factors from the perspective of ECDIS users and analyzing their priorities, and it is necessary to analyze various cyber-attacks that may occur on ships in the future.