• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.474-482
• /
• 2021

An average of two to three typhoons that occur in the Philippines or Taiwan pass through Korea each year owing to the influence of the geographical location and western winds. Because Jinhae Bay is known as Korea's representative typhoon refuge, it is filled with ships during typhoons and later becomes saturated with ships anchored to the surrounding routes. If a strong wind drags an anchored ship, a collision accident may occur because of the short distance between the ships. Therefore, a systematic anchoring safety management of Jinhae Bay is required. In this study, the minimum wind speeds of a dragging anchor based on the water depths of Jinhae Bay anchorages were investigated. When 7-9 shackles were given, the minimum wind speeds were 48-63, 46-61, and 39-54 knots at depths of 20, 35, and 50 m, respectively. As the water depth increased, the length of the cable laid on the sea bed became shorter than 5 m owing to the external force, and the minimum wind speed showed a significant difference of 4-8 knots. In addition, ships with high holding power anchors (AC-14 type) had higher minimum wind speeds than ships with conventional anchors (ASS type). Finally, it was confirmed that at a depth of 50 m, dragging easily occurred even when a high holding power anchor was applied.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.4 no.1
• /
• pp.49-54
• /
• 1967

The authors considered the effects of trim in the small coastal passenger boat upon resistance in this paper. Any change of trim no matter how small, necessarily produces some effect upon resistance. The relations between the resistance coefficients and trim were investigated through the towing test of the Model $MCI-P_1-65$, Korean Standardized Ship, GT 70 tons passenger boat in the gravitational tank. The Lines of the Model are given in Fig. 1. Principal dimensions and other characteristics vary with the trim in general. Those values varied with the trim for $MCI-P_1-65$ are tabulated in table 1. The resistance was measured at five conditions such as even keel, 0.0273L, (original designed trim) 0.0473L, 0.0663L, 0.0873L trim by the stern, fixing the displacement corresponding to the designed load water line. Model was made of wood in length of 3.5 feet coated with varnish, and without appendages. As the artificial turbulent stimulator, the sand strip method was used. The results of model towing tests, correcting to water temperature of $70^{\circ}F$, were expanded to full scale using the Schoenherr's friction formula and surface roughness allowance coefficient of 0.0004. The authors point out, the following results. 1) Optimum trim which gives the minimum resistance exists for every speed at constant displacement and each comes to the same value. For $MCI-P_1-65$ optimum trim is 0.0673L trim by the stern(Fig.4-The cross curves of the resistancecoefficients). 2) At constant displacement, when LCB(longitudinal position of center of buoyancy) varies with the trim, there exists optimum value of LCB which gives minimum resistance for every speed and each comes to the same value. For $MCI-P_1-65$ optimum position of LCB is 8%L aft from midship section (Fig.6).

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.54-61
• /
• 2001

It is expected that ISO issue a standard method for sea trial and the correction of data taken during speed trial. One of the major reason for this effort(or trend) is to get reliable and accurate sea trial measurement. With the same philosophy, SHI(Samsung Heavy Industries) developed a nautical signal integrated unit in 1996. Two years after this, SHI developed a software that enable the user to analyze the sea trial measurement on-board. After a series of stationary and performance tests, KR has issued a certificate for international application of the software. We have been utilizing this program for the measurement and analysis of sea trial of more than 70 ships built in SHI shipyard. However, one critical defect of the software has been that it can be applied only for single shaft vessels. In this short paper, we would like to introduce a new version of the software which can be used for both single and multi thruster vessels. This paper deals with the introduction, test method and some of the test result.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.722-728
• /
• 2015

The demand for shipboard energy management is expected to gradually increase based on ship energy efficiency management plans (SEEMPs), which have been in use since January 1, 2013. Therefore, the fuel consumption of the main engine, which occupies the greatest portion of the energy used, along with elements related to the engine power, should be strictly monitored. There are many different methods for indicating the engine power. However, this study performed an experiment to monitor the status of a ship's engine power in real time using an encoder and a proximate switch, which are economical to purchase and easy to install. In the experiment, the angular velocity during one cycle of a two-stroke low-speed engine was measured, and the measured data were converted to the torque fluctuation. The angular velocity during an abnormal firing condition in the cylinder was also measured, and the torque fluctuation as a result of a misfire was considered. The results were compared with sea trial data to determine the reliability. In this study, the status of the engine power was determined using the torque fluctuation of the main engine in an operating ship.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.775-782
• /
• 2021

The Myodo-Strait at Yeosu Port is normally used as a major vessel passage for dangerous cargo carriers that carry regular products of dangerous goods. Currently, the Myodo-Strait allows only single passage, and the speed of passage is also limited to 8 knots. As a result, demurrage at the wharf of hazardous goods are also on the rise. It is expected that the development of a number of dangerous commodity wharf in the future will increase the volume of vessel traffic and increase the number of vessels used in the project area. Therefore, it is urgent to improve the waterway in order to secure the safety of ships using the waterway and improve the demurrage. This study proposed an improvement plan for the waterway through the analysis of the marine environment of the waterway and the process of collecting opinions from users in the sea area. and it was finally proposed to expend the width of the strait to 300m and secure a depth of 9.50m through Guidelines of Port and Harbor Design review and ship handling simulation evaluation. In addition it was evaluated that the vessel traffic congestions at peak-time in the situation of solo passage was greatly improved from 71.01% to 47.3% even when it was allowed to ship's crossing passage, as a result of vessel traffic congestions evaluation. According to the proposed improvement plan, the safety of ships' passage in the project area can be secured, and the issue of demurrage was also considered to be improved.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2001.10a
• /
• pp.19-25
• /
• 2001

At present the identification of vessels is still depending on the OOW (Officer Of Wateh) in VTS (Vessel Traffic Service), which is completed by radar, and also by the combination of VHF radio and VHF direction finder. However, with the development of port transportation and economic, this conventional way of identification can't satisfy more and more request for the information that the VTS needs from the vessels. In such a case, the AIS(Automatic Identification System) precept which is based on STDMA (Self-organized Time Division Multiple Access) technique is put forward by IMO (International Maritime Organization). AIS can automatically provide the information, including own ship's identification, type, position, course, speed, and other information to the appropriately equipped coast station and other ships. At the same time it can also automatically monitor and track the nearby ships similarly fitted with AIS. On the basis of describing the whole comprising and the format of transmission information of AIS, this paper mainly studies the key communication techniques in AIS, such as STDMA protocol, net synchronization and GMSK(Gaussian Minimum Shift Keying)technique, and so on. At last this paper briefly introduces the recommendation decided by IMO on forcing the sea-going ships to fixed with AIS equipments, and it continuos with the unexploited potential of AIS if it applies in VTS.

• Journal of Navigation and Port Research
• /
• v.38 no.1
• /
• pp.53-57
• /
• 2014

This thesis, concentrates on marine collision risks of the area divided by cells. Using a gas molecular collision calculation model, a collision risk model is proposed. Collision risk is estimated by relative angle, relative speed, and ship's density in the cell. For one week, Automatic Identification System (AIS) data was collected and analyzed on the Busan North Port area. The results indicate a high-risk area at the sea route connection point in Busan North Port. It also shows that twilight is the time of day when most collisions occur. This means that the area is high risk due to the number of collisions and other dangerous factors related to twilight. Although there is still need to consider other risks such as grounding risks, the results of this study are useful to for plotting a risk map for the port.

• Journal of Korea Multimedia Society
• /
• v.16 no.12
• /
• pp.1403-1412
• /
• 2013

In the maritime ships or airplanes, users should utilize the satellite channel in orer to use web service. However, the satellite channel is costly and does not give users satisfied response time. In the ship, the users may receive plenty of extra data when they obtain internet news. The extra data may be unnecessary image and advertise. Therefore, they should pay unnecessary data usage charges as well. In this paper, we suggest a proxy model that solves the problem of cost and speed. The proposed proxy reduces the of data through the satellite link by image and advertising blocking, caching, image re-requesting functions. It's performance was tested by a real satellite communication.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.59-62
• /
• 2017

Recently oil price has got lower, but energy efficiency has been considered as an important factor to minimize ship operational costs and reduce greenhouse gas emissions. For the reason, it is necessary that energy efficiency improvement for hull form design and operational performance reflect an understanding of the vessel's operational profile. Throughout the life of the vessel, this can lead to important economies of fuel, even if, in some cases, a small penalty can be taken for design condition. In the present paper, hull form was developed for 5,000TEU class container carrier at given operation profile. As a CFD result at several design point, optimized hull form has improved resistance performance in comparison with the basis hull form. To reducing the viscosity and the wave resistance at multi draft and multi speed, the hull form was investigated for Cp-curve, frame and local shape. Numerical study has been performed using WAVIS & Star-CCM+ and verified by model test in the towing tank.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.4
• /
• pp.477-486
• /
• 2001

Although the ports are actually competing with various strategies, the definition and structural understanding of port competitive power are not known very much. Therefore this study has launched from this fact, and has the objective of obtaining the structural model of the competitive power, and understanding the components of the port competitive power. The following are the results of the study. First, the process began by abstracting the components that composed the port competitive power through recent research, and grouping it by the most core components using the KJ method. Also, by using the FSM(Fuzzy Structural Modeling) method to understand the structure of the grouped components, and the structural model of the port competitive power was able to obtain as the result. Second, when analyzing the obtained structural model, port expenses, main trunk location, port congestion and port facility came out to be the most important component groups, and especially port expenses was the most effective component that effected all the other components overall. Third, the component groups that were relatively less important, effected by most of the other components, and located on the top level of the structure model were the hinterland accessibility, port ownership, customs duties speed, and large ship port entrance possibility etc. Fourth, the results of this study will be able to be used when establishing competing strategies for our country's ports by proposing the relatively important components with the port competitive rower considered.