• 한국항해항만학회지
• /
• 제34권2호
• /
• pp.105-110
• /
• 2010

The studies on automatic ship collision avoidance system, which have been carried out in the last 10 years, are facing on new situation due to newly developed high technology such as computer and other information system. It was almost impossible to make it used in real navigation field 3-4 years ago because of the absence of any tool to give other ship's information, however recently developed technology suggests new possibility. This study is carried out to develop the automatic ship collision avoidance support system which considers ship's manoeuvrability into it's collision avoidance algorithm. One of the important part in ship collision avoidance system is collision decision module which can calculate collision risk with other ships and act properly to avoid the situation. Many of previous researches are using present ship's dynamic data such as present speed, position and course to calculate collision risk. However when a ship commences avoidance action, the real situation is quite different with one that has been estimated by the ship's initial data due to the ship's manoeuvring characteristic. Therefore it is better to take into account ship's manoeuvring characteristic from the stage of collision decision in ship collision avoidance system. In this study, these effects are included in the developed system. The proposed system are verified its usefulness in numerical simulation environments.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.3-10
• /
• 2006

Recently it is coming to be hish reality on visual system in ship-handling simulator depending on the technical development of 3D computer graphics. Even with high reality, it is possible that visual information presented seafarers through screen or display is not equivalent to the real world. In docking maneuvering, visual targets or obstructs are sighted close to ship's operator or within few hundred meters, so it might be possible to affect visual information such as the difference between both eyes' and single eye's visual sight. Because it is not possible to perceive of very slow ship's movement by visual in case of very large vessels, so the Doppler Docking SONAR and/or Docking Speed and Distance Measurement Equipment were developed and applied for safety docking maneuvering. By the way, the simulator training includes the ship's maneuvering training in docking, but in Ship-handling Simulator and also onboard, there are some limitations of perception of ship's movement with visual information. In this paper, perception of ship's movement with visual system in Ship-handling Simulator and competition of performances of visual systems that are conventional screen type with Fixed Eye-point system and Mission Simulator. We got some conclusions not only on the effectiveness for visual system but also on the human behavior in docking maneuver.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.745-748
• /
• 2001

디지털 선박은 자율운항 제어 시스템(Intelligent Navigation System), 선박자동식별 시스템(Automatic Identification System), 위성통신망 원격제어 시스템(Integrated Maritime Information Technology)을 기반의 One-man Bridge 시스템을 갖는 차세대 선박을 나타낸다 INS 시스템에서는 선박의 항해와 관련된 기능을 수행하며, 최적항로 계획, 좌초 및 충돌방지 기법, 경제적 운항, 엔진통합제어, 내항성 성능평가 등의 기능이 디지털 GIS(Geographic Information System) 기반의 환경에서 제공된다. AIS 시스템은 선박과 선박간 또는 선박과 관제소간에 선박의 항해 관련 정보를 주기적으로 전송하여 충돌 방지를 기능을 제공하며, IMIT 시스템은 선박내의 통합 플랫폼을 제공하여 선내 네트워크 통합 솔루션을 제공한다. 또한, IMIT 시스템은 위성통신(INMARSAT, OrbComm, 해양관측위성)을 통해 선박과 관제소와의 데이터 송수신을 지원하여, 관제소에서 선박의 항해 상태를 감시하고 선박에 해양 환경정보, 조선소에서의 선박관련 정보 등을 제공하는 기능을 갖는다. 본 논문에서는 디지털 선박의 전체적인 시스템 구현방안과 세부 시스템별 구현방안에 대해 소개하며, 디지털-lT 기반의 차세대 선박에 대한 방향을 제시하도록 한다.

• 한국항해학회지
• /
• 제20권1호
• /
• pp.11-26
• /
• 1996

On this paper, the traditional methods for the measurement of ship's maneuverabilities during the sea-trial of newly built ship are summarized and new methods for the same measurement using Integrated Navigation System and GPS are introduced. After various sea-trials of training ship "HANNARA" which are equipped with modern INS and GPS system, the results are compared and analysed. The purpose of this paper is to present more accurate methods of measurement of ship's maneuverabilities during sea-trial using INS and GPS which are gradually becoming the basic navigational equipments on many newly constructed vessels.d vessels.

• 수산해양기술연구
• /
• 제46권1호
• /
• pp.50-55
• /
• 2010

The ship's heading information of hybrid GPS/EM compass were applied to the AIS of fishing vessel and examined the possibility of accuracy improvement. It is observed 453 each in AIS receiver of land among 3,982 each in AIS Rx/Tx transponder of the test ship at sea, and transmission interval according to the speed of ship is determined the 11.4% good transmitting data of the all information. In results, maximum compass error for the ship's heading of an EM compass was $19.1^{\circ}$. The variance of ship's heading owing to the speed of ship is surveyed. The COG (Course Over Ground) was changed extremely in $180^{\circ}W-179^{\circ}E$ range under 4.9knots, and in $24^{\circ}W-23^{\circ}E$ range over 4.9knots. Finally, using the ship's heading of EM compass and the COG from GPS for the autopilot system of a small fishing boat and the ship's heading information of AIS results in danger on the own ship's navigation safety and leads to make confusion both the others and VTS (Vessel Traffic Service) center. Therefore, the hybrid GPS/EM compass is identified as the best system for a small fishing boat and is allowed to offer continuously a ship's heading information with high accuracy and stability.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권4호
• /
• pp.667-674
• /
• 2004

This thesis is about the Impressed Current Cathodic Protection (ICCP) control and monitoring system. which brings protection against the corrosion of the ship's hull in the sea environments. The ICCP system is composed of a power supply. anode. reference electrode and controller. AC sources from the ship's generator are converted to DC sources in terms of power supply, and a protection current is sent to ship's hull though anode. The controller fully senses whether or not the detected potential is within a range of protection of ship's hull and then it is automatically controlled to increase or decrease the amount of protective current to be sent to the anode. The monitoring system with RS 232/485 communication is also studied in order to check the normal state of the system at a long period. because an operator does not always watch over this system and thus the system cannot operate well because of his or her negligent management. Since the vessel always navigates in the sea. an characteristics experiment of the ICCP system is conducted by introducing various corrosive environmental factors such as velocity, resistivity, dissolved oxygen, PH, temperature and contamination degree. These results must be referred to when the ICCP system is set up. In short. the ICCP is a multi-system for use on ships and on land structures because it includes a safety device. It is suggested that this system can accomodate a ship's automation and will be very useful.

• 산업경영시스템학회지
• /
• 제35권1호
• /
• pp.198-213
• /
• 2012

Navy ship acquisition management business contributed to the korean Navy and defense exports with government suppliers in Korea for over 40 years. But due to advanced technology, development trend of Navy ship and defense export requirements, it enable to make a contribution to a better system improvement are being demanded. In this paper, an adjective Navy ship acquisition process is presented in order to improve the acquisition process takes the first step for acquisition planning process to enhance the efficiency and rationality that is based on consensus of Navy ship expert and experienced. In addition, systems engineering (SE) and quality control (QC) techniques based on Modeling and Simulation are investigated to carry out efficient project management and scientific quality control system in Navy ship acquisition process. Finally, it is suggested to apply SE/QC based on M&S for Navy ship acquisition process using civilian infrastructure and organizations in order to take advantage of the world's leading domestic industry based on considering the difficult conditions of Navy ship suppliers.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.123-127
• /
• 2004

선박의 접안 시 현재 중ㆍ대형 선박은 체계화된 접안 시스템 없이 주선박의 선수와 선미 및 예인선에서 무전기를 이용한 통신에 의존하여 선박을 접안하고 있다. 본 논문에서는 이를 보완하고자 DGPS를 이용한 선반접안 시뮬레이tus 시스템을 설계하고자 한다. 주선박의 서버는 경ㆍ위도 좌표 값, 헤딩, 속도 등의 정보를 이용하여 선박과 부두와의 거리, 진행방향등을 구하고, 예인선과의 실시간 위치정보의 공유를 통한 정밀측정으로 안전하게 접안을 유도한다. 주 선박 및 예인선의 조타수는 PDA의 클라이언트 프로그램으로 실시간 전송되는 선박의 상태 및 각종 정보를 통해 진행상황을 알 수 있다. 또한, 시뮬레이션 프로그램으로 계산된 선박의 유도경로 데이터를 데이터베이스화하여 최적의 접안 경로를 제시함으로써, 기존의 접안환경보다 정밀한 상황 판단의 방법을 제시하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.24-29
• /
• 2004

A small, highly-trained crew working on the ship's automation has contributed to the improvement of operation efficiency and the labor environment on board ship. However, at the same time, having a small crew adds more responsibility to the ship's officers to safely operate and manage the ship. Recently, development on the system to concentrate important information being scattered at the various pieces of navigational equipment has been actively studied, using information and computer technology. The purpose of this study is to set up and implement an integrated marine data networking and communication system on the training-research ship. Information relating to navigation, engine and office automation were investigated and analyzed, and implementation methods associated with navigation, engine and the management information system were designed and presented. In addition, the networking system and navigational signal interface unit for the integrated communication system, and the data communication method between the ship and land are also discussed.

• 한국해양공학회지
• /
• 제18권6호
• /
• pp.44-50
• /
• 2004

A small, highly-trained crew working on the ship's automation has contributed to the improvement of operations and the labor environment on board ship. However, at the same time, having a small crew adds more responsibility to the ship's officers to safely operate and manage the ship. With the use of information and computer technology, efforts are being made towards the development of a system that will concentrate important information from the various pieces of navigational equipment. The purpose of this study is to set up and implement an integrated marine data networking and communication system on the training-research ship. Information relating to navigation, engine and office automation are investigated and analyzed, and implementation methods associated with navigation, engine and management information system were designed and presented. In addition, the networking system of the navigational signal interface unit for the integrated communication system, and the data communication method between the ship and land are also discussed.