• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.4
• /
• pp.349-355
• /
• 2015

Through the recent accident, the checking of ultimate hull girder capacity for container ship should be needed. Smith’s method is well known as the only simplified method to access rapidly for ultimate hull girder capacity except very expensive nonlinear F.E approach. This simplified method, however, is admitted to apply only to bulker and tanker in accordance with Classification Rules up to now. The targets of this study are to verify effectiveness of the simplified method for container ship’s ultimate hull girder strength and to propose the safety factor considering the local bending in double bottom structures due to out of plane loads through the nonlinear F.E analyses. Two different sized ships and three loading conditions which are pure bending, homo-loading and one-bay empty condition were used for this study. Based on the F.E results, the present study showed that CSR’s simplified method is available for the ultimate hull girder strength of container ship and over 1.2 of safety factor should be applied to consider the local bending effect in double bottom structures due to out of plane loads such as sea pressure an cargo.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.2
• /
• pp.96-104
• /
• 1984

This paper is on the prediction and response of the ship hull girder due to slamming of foreward flat bottom plate. The response with respect to foreward flat bottom is divided two kinds by estimating method. One is the estimation of impact forces by slamming, Another is the response of hull girder due to impact forces, that is, displacement, velocity, acceleration, etc. must calculate the values for considered ship hull girder. In this paper, therefore, was estimated only impact forces along ship ordinate of foreward. The analysis of data for estimation followed mainly papers of Ochi. These estimated data shall contribute for ship gull construction for basic optimum design. In particular, the estimated impact forces shall be given for the response of ship gull girder on the foreward flat bottom plate with characteristics of external forces.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.05a
• /
• pp.141-151
• /
• 2003

In this study the writer would like to study the art of navigation in the Era of Silla. For the purpose of this study, the writer studied ship's log book of Ennin's Diary, the ancient ship's structures of Korean, Chinese, Japanese, winds and ocean currents around Korean Peninsular which effect the navigation of sailing ship, and ancient reference books and materials. The result of this study. in the ship's structure in the Era of Silla. bottom structure is considered flat and V-Shaped type, and sailing ship had anchor, sail, considerable deckhouse, transverse bulkhead. And the ship's main materials of sailing ship was wood. partially used irons in the panting structures. In the art of navigation, navigators used winds, ocean current, anchor, sail, depth and color of sea water, lights, ballast. Especially navigators used astrologers and geomancers for astronomical observation, weather forecast, natural phenomena.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.1
• /
• pp.24-33
• /
• 2004

Recently, ship acoustics takes more important role in acoustic stealth and classification of underwater targets. In this paper, a theoretical concept is proposed for M＆S-based test and evaluation of ship acoustics. The concept is based on two different approaches: on Top-Down method which emphasizes the survivability of the ship and on Bottom-Up method which considers acoustic characteristics of the ship-equipments. In order to improve the effectiveness of M＆S-based T＆E for ship acoustics, it is recommended in this paper to compromise the two approaches as adequate.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.1
• /
• pp.34-41
• /
• 2014

When a ship sails in shallow water, it is well known that an additional sinkage and trim of the ship(squat) is caused by change of hydrodynamic force between the seabed and the bottom of a ship. In this paper, to examine this phenomenon by model tests, the squat of KCS model ship at a low speed is measured by the vision based ship motion measurement system during HPMM tests. Various combinations of a ship speed, a rudder angle and a drift angle were tested at three depth conditions(H/T = 1.2, 1.5 & 2.0). As a result, increase of the ship's speed and ship's drift angle caused an increase in ship squat, but the ship's rudder angle did not. The rate of increase in ship squat was the most at H/T = 1.2 condition. Lastly these experimental results are compared to the results by three empirical formulas and two CFD methods. The tendency of ship squat measured by experiment is similar to those of empirical formulas.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.19 no.2
• /
• pp.1-11
• /
• 1982

Ship bottom structure is idealized by an equivalent orthotropic plate upon which uniform lateral, uni-axial and bi-axial loads act. Solutions in the form of series representing deflections and moments at the center are obtained in case of simply supported and fixed boundary conditions. Variables in the solutions are reduced and grouped in nondimensional parameters. Stresses in the members of actual plate-stiffener combination are calculated corresponding to moments obtained above. In this paper design curves of deflections and moments for two different sets of boundary conditions are given, and they are compared with Schade's design curves and Mansour's design curves. Some examples for application are given and compared with the results obtained by FEM(SAPIV) in appendix.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1997.10a
• /
• pp.185-202
• /
• 1997

Hull forms of ancient ships in Korea and China have been changed according to their voyages and routes. Therefore it is necessary for shipbuilding engineers to reestablish the ancient shipbuilding history, and to presume, restore and revive the lost cultural inheritances. We, however, do not have many historical documents or credible materials that can our ancestors' great shipbuilding techniques : at the same time we do not have paid much attention to the research on such documents and materials. This paper aims not only to study and compare shifting process of ancient ship's hull forms in Korea and China by making use of verifiable materials obtained in the process of excavating and restoring Shinan ancient ship. The results of comparing structural characteristics and hull forms of ancient ships in Korea and China and as follwing : (1) Korean ancient ships have transverse beam instead of frame . Judged from the bottomform, Korean ancient ships are grooved clinker type ships of flat bottom type, in which bottom planking is fixed by wooden bar. (2) Chinese ancient ships have transverse bulkhead structure instead of frame, Judged from the bottom form , Chinese ancient ships are rabetted clinker type ships of V-bottom type with a bar keel. The form , the position, and the size of a sail are closely related with the wind force. It is not only quite difficult to presume forms and sizes of ancient ships' sails precisely, but also impossible to come to an accurate conclusion wihtout much experience. Current 10-year-statistics of the wind force are used to obtain presumed routes of ancient ships in Korea and China. Conclusions obtained from the hull form , sail form and size , and mast height of Shinan ancient ship will provide credible data for sea trade routes and transformation capability, and wil be used for effective materials on the study of the shifting process of ancient ships in Korea and China.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.58-59
• /
• 2017

• Bulletin of the Society of Naval Architects of Korea
• /
• v.16 no.4
• /
• pp.3-11
• /
• 1979

This paper deals with Guilloton's method for wave-making resistance calculation. Ship is considered as slender in this paper. Guillotin's method requires a large and fast computer, while mini-computer is good enough for the present method. Present method is practical as well, as prismatic curves along with other principal particulars are requirements for the calculation. Unless the ship is thin, Z-transformation is difficult to carry out, but this can be done smoothly in the present method by considering the flow around the bottom of the ship. As an example of this method, corresponding real hulls of Maruo's least wave-making resistance ship forms are calculated.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.47-60
• /
• 2023

A thorough inventory of ship emissions, particularly ship's emission of in-port area is necessary to identify significant sources of exhaust gases such as NOx, SOx, PM, and CO₂ and trends in emission levels over time, and reduce their serious effects on the environment and human health. Therefore, the goal of this study is to assess the volume of emissions from ships in Mokpo port, which serves as a gateway to the southwest coast of Korea, using a bottom-up methodology and data from the automatic identification system (AIS) and the Korean Port Management Information System (Port-MIS). In this work, an analysis of ship movement utilizing AIS data and an actual set of data on ship specification were gathered. By examining ship movement using AIS data, We also proposed a new approach for identifying cruising/maneuvering mode. Finally, the results were classified by ship operating mode, by exhaust gas, by ship type, and by berth, which provides a thorough and in-depth analysis of the air pollution caused by ships in Mokpo port.