• Title/Summary/Keyword: Shifter

Search Result 392, Processing Time 0.027 seconds

Secondary Neutron Dose Measurement for Proton Line Scanning Therapy

  • Lee, Chaeyeong;Lee, Sangmin;Chung, Kwangzoo;Han, Youngyih;Chung, Yong Hyun;Kim, Jin Sung
    • Progress in Medical Physics
    • /
    • v.27 no.3
    • /
    • pp.162-168
    • /
    • 2016
  • Proton therapy is increasingly being actively used in the treatment of cancer. In contrast to photons, protons have the potential advantage of delivering higher doses to the cancerous tissue and lower doses to the surrounding normal tissue. However, a range shifter is needed to degrade the beam energy in order to apply the pencil beam scanning technique to tumors located close to the minimum range. The secondary neutrons are produced in the beam path including within the patient's body as a result of nuclear interactions. Therefore, unintended side effects may possibly occur. The research related to the secondary neutrons generated during proton therapy has been presented in a variety of studies worldwide, since 2007. In this study, we measured the magnitude of the secondary neutron dose depending on the location of the detector and the use of a range shifter at the beam nozzle of the proton scanning mode, which was recently installed. In addition, the production of secondary neutrons was measured and estimated as a function of the distance between the isocenter and detector. The neutron dose was measured using WENDI-II (Wide Energy Neutron Detection Instruments) and a Plastic Water phantom; a Zebra dosimeter and 4-cm-thick range shifter were also employed as a phantom. In conclusion, we need to consider the secondary neutron dose at proton scanning facilities to employ the range shifter reasonably and effectively.

Reflection-Type 5-bit Digital Phase Shifter with Constant Insertion Loss (균일 삽입 손실 특성을 갖는 반사형의 5-비트 디지털 위상 변위기)

  • 고경석;최익권
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.6
    • /
    • pp.582-589
    • /
    • 2002
  • This paper presents 12.2 GHz ~ 12.7 GHz frequency band reflection type 5-bit digital phase shifter with constant insertion loss property that was fabricated with relatively low cost's InGaAs HEMT for amplifier. The unavoidable large insertion loss difference between on and off states of HEMT, when it is designed by conventional design theory based on ideal switching device, is removed by transforming the HEMT impedances at on and off states to other proper values connecting a certain length transmission line to HEMT and then applying the conventional design theory. The fabricated 5-bit digital phase shifter shows very good insertion loss properties of less than 1.5 dB insertion loss difference and -4.5 dB ~ -6 dB insertion loss in 35 phase steps at 12.2 GHz ~ 12.7 GHz. These results verify the design method presented in this paper, which is useful to design phase shifter of constant insertion loss with non-ideal switching device.

Design and Fabrication of 5-Bit Broadband MMIC Phase Shifter (5-Bit 광대역 MMIC 위상 변위기 설계 및 제작)

  • 정상화;백승원;이상원;정기웅;정명득;우병일;소준호;임중수;박동철
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.2
    • /
    • pp.123-129
    • /
    • 2002
  • 5-bit broadband MMIC phase shifter has been designed and fabricated. For the broadband performance, 11.25$^{\circ}$, 22.5$^{\circ}$, 45$^{\circ}$ and 90$^{\circ}$ bit have been designed with Lange coupler and 180$^{\circ}$ bit has been implemented by using shorted coupled line with Lange coupler and $\pi$-network of transmission line. Due to Lange coupler with large size, the Lange couplers have been folded far circuit size reduction. Low loss PIN diode has been utilized as a switch for each bit. Fabricated 5-bit broadband phase shifter shows the measured results that RMS phase error of 5 major phases is 3.5$^{\circ}$, maximum insertion loss is 12.5 dB, and maximum input and output return loss are 7 dB and 10 dB, respectively. The size of fabricated phase shifter is 6.5$\times$5.3 $ extrm{mm}^2$.

Design of the HDD Based Time-Shifter for DTV (대용량 HDD를 기반으로 한 DTV용 Time-Shifter 의 설계)

  • 정수운;이동호
    • Proceedings of the IEEK Conference
    • /
    • 2000.09a
    • /
    • pp.885-888
    • /
    • 2000
  • 디지털 기술의 급속한 발전으로 디지털 방송을 위한 DTV가 곧 상용화 될 것으로 보인다. DTV는 단순한 TV수상기 기능 외에 여러 가지 응용 제품으로 발전할 수 있다는 장점이 있다. 그 응용 제품으로 현재 각 국에서 앞 다투어 개발중인 것에는 WEB TV 나 PVR 등을 들 수 있다. 본 논문은 대용량 하드디스크를 이용하여 HD 급 방송 스트림에서도 성능을 발휘하는 DTV의 PVR 기능 추가를 위한 Time-Shifter보드 설계에 관한 것이다. HD급 방송 스트림을 위한 PVR을 개발 할때의 문제점은 읽기와 쓰기가 동시에 발생할 때 최대 40Mbps에 달하는 데이터 엑세스 속도인데 본 논문에서는 현재 시판중인 하드디스크(HDD)를 이용하여 위 속도를 나타내기 위한 효율적인 DMA방식과 버퍼 제어 방법을 제시한다 더불어 저장되었던 스트림을 다시 재생 할 때 문제 될 수 있는 bit rate 제어는 time-stamp방식을 이용하여 해결하였으며 VCR에서의 트릭 모드 재생 기능을 위해 Index 추출 방식을 적용하였다.

  • PDF

Broadband Characteristics of Asymmetirc Coupled-Line 90$^{\circ}$Phase Shifter with Dielectric Overlay (유전체 덮개층을 갖는 비대칭 결합선로를 이용한 90$^{\circ}$ 위상천이기의 광대역 특성)

  • 윤남일;강창훈;이용국;박한규
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.24 no.6B
    • /
    • pp.1142-1148
    • /
    • 1999
  • In this paper, the characteristics of frequency dependent dispersion are analyzed for the phase shifters in Ku-band phased array antenna system using full-wave method, SDA(Spectral Domain Approach).The design technique of asymmetric coupled-line phase shifter with dielectric overlay is proposed. The compared results of phase responses are shown with conventional symmetric coupled-line Schiffman phase shifter. The experimental results verify the improvement of broadband characteristics by the increasing bandwidths and the decreasing phase deviations.

  • PDF

Phase-Shifter for Real-Time Control of Transmission System (송전계통의 실시간 제어를 위한 위상변이기)

  • Han, Hyung-Moon;Chang, Byong-Kun
    • Proceedings of the KIEE Conference
    • /
    • 1994.07a
    • /
    • pp.432-434
    • /
    • 1994
  • This paper describes a phase-shifter which can flexibly adjust the active and reactive power flow through an ac transmission line. The phase-shifter has two voltage-source converters sharing an energy storage capacitor. The magnitude of the injected voltage is controlled by the converter I connected in parallel with the sending terminal, while that of phase angle by the converter II in series with the line through the coupling transformer. In order to analyze the whole system operation, an equivalent circuit model was developed and verified by a computer simulation with EMTP code.

  • PDF

Improved Reduction of Carbon Monoxide by Highly Efficient Catalytic Shift for Fuel Cell Applications

  • Youn, M.J.;Chun, Y.N.
    • Environmental Engineering Research
    • /
    • v.13 no.4
    • /
    • pp.192-196
    • /
    • 2008
  • The generation of high purity hydrogen from reformed hydrocarbon fuels, or syngas, is essential for efficient operation of the fuel cell (PEMFC, Polymer Electrolyte Membrane Fuel Cell). Usually, major components of reformed gas are $H_2$, CO, $CO_2$ and $H_2O$. Especially a major component, CO poisons the electrode of fuel cells. The water gas shifter (WGS) that shifts CO to $CO_2$ and simultaneously produces $H_2$, was developed to a two stage catalytic conversion process involving a high temperature shifter (HTS) and a low temperature shifter (LTS). Also, experiments were carried out to reduce the carbon monoxide up to $3{\sim}4%$ in the HTS and lower than 5,000 ppm via the LTS.

A Compact Active Channel Module Design for Active Phased Array Antenna System

  • Jung, Young-Bae
    • Journal of IKEEE
    • /
    • v.17 no.4
    • /
    • pp.393-397
    • /
    • 2013
  • This paper introduces the T/RX combined compact active channel module which is a key unit of the active phased array antenna(APAA) system. This module is mainly compoased of two parts for TX and RX fabricated on both sides of the active module for size reduction. The TX-part is primarily composed of a 3-stage amplifier, a microstrip phase shifter, a thermal compensation and a power detection circuit. The RX-part is composed of LNAs a microstrip phase shifter and BPFs for TX power rejection. Using the proposed design structure we can realized a compact active channel module having high performance.

A design of the phase shifter using tunable shorted terminated combline filters (종단 가변 Comb-line 필터를 사용한 위상 변위기 설계)

  • 김영태;류한철;곽민환;문승언;이수재;강병권;김선형;박준석
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2002.11a
    • /
    • pp.161-164
    • /
    • 2002
  • In this paper, a design technique is introduced for designing a 360-degree linear analog phase shifter at 1.8㎓. Using tunable short-circuit terminated comb-line filters as reactive loads, the circuit gives a very small insertion loss(less than 0.1㏈) and an almost linear phase shifter over the filter bandwidth for the full 360-degree range. We were showed large phase variation with small capacitance variation in the quadrature hybrid coupler using tunable shorted terminated combline filters.

  • PDF

Integrated Photonic RF Phase Shifter Using an Electrooptic Polymer Modulator (전기광학폴리머 변조기틀 이용한 집적광학적 RF 위상변환기)

  • 이상신
    • Korean Journal of Optics and Photonics
    • /
    • v.15 no.3
    • /
    • pp.274-277
    • /
    • 2004
  • An integrated photonic radio frequency (RF) phase shifter has been proposed and fabricated using a nested dual Mach-Zehnder modulator configuration in a new electro-optic polymer. The fabricated device shows a continuous voltage control of the RF signal phase. A near-linear phase shift exceeding 108$^{\circ}$was obtained for a 16-GHz microwave signal by tuning the do control voltage over a 7.8- $V_{pp}$ range.e.