• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.195.1-195.1
• /
• 2016

Currently, as Plasma application is expanded to the industrial and medical industrial, low temperature plasma applications became important. Especially in medical and biology, many researchers have studied about generated radical species in atmospheric pressure low temperature plasma directly adapted to human body. Therefore, so measurement their plasma parameter is very important work and is widely studied all around world. One of the plasma parameters is electron density and it is closely relative to radical production through the plasma source. some kinds of method to measuring the electron density are Thomson scattering spectroscopy and Millimeter-wave transmission measurement. But most methods have very expensive cost and complex configuration to composed of experiment system. We selected Michelson interferometer system which is very cheap and simple to setting up, so we tried to measuring electron density by laser interferometer with laser beam chopping module for measurement of temporal phase difference in plasma jet. To measuring electron density at atmospheric pressure Ar plasma jet, we obtained the temporal phase shift signal of interferometer. Phase difference of interferometer can occur because of change by refractive index of electron density in plasma jet. The electron density was able to estimate with this phase difference values by using physical formula about refractive index change of external electromagnetic wave in plasma. Our guiding laser used Helium-Neon laser of the centered wavelength of 632 nm. We installed chopper module which can make a 4kHz pulse laser signal at the laser front side. In this experiment, we obtained more exact synchronized phase difference between with and without plasma jet than reported data at last year. Especially, we found the phase difference between time range of discharge current. Electron density is changed from Townsend discharge's electron bombardment, so we observed the phase difference phenomenon and calculated the temporal electron density by using phase shift. In our result, we suggest that the electron density have approximately range between 1014~ 1015 cm-3 in atmospheric pressure Ar plasma jet.

• Elastomers and Composites
• /
• v.52 no.3
• /
• pp.180-186
• /
• 2017

In this work, the effect of low-temperature dehydration of a poly(styrene-co-styrenesulfonic acid) (PSSA) membrane was investigated by differential scanning calorimetry, fourier transform infrared spectroscopy (FT-IR), electron magnetic resonancespectroscopy (EMR), and $^1H$- and $^{13}C$ solid-state nuclear magnetic resonance spectroscopy. These analyses were performed at room temperature for powdered PSSA specimens with and without dehydration and the following key observations were made. First, FT-IR analysis showed that low-temperature dehydration not only transformed the [${SO_3}^-{\cdots}H^+$] ionic pair in the non-hydrated PSSA to an $SO_3H$ group, but also induced the formation of -C=C- double bonds in the dehydrated PSSA. Second, the ${-SO_3}^{\bullet}$ radical was unambiguously identified by EMR spectroscopy. Third, H-abstraction was detected by $^1H$ magic-angle spinning spectroscopy. Finally, an unexpected color shift from white for the non-hydrated PSSA to a yellowish brown for the dehydrated sample was observed. In order to explain these experimental results, it was proposed that the formation of the intermediate hydrogen ($H^{\bullet}$) or hydroxyl radical ($HO^{\bullet}$) species was initiated by the dehydration process. The sespecies attacked the $SO_3H$ group and the tertiary proton at the ${\alpha}-carbon$, resulting in the formation of $-SO^{\bullet}$ radicals and -C=C- double bonds, which correlated with the color shift in the dehydrated PSSA sample. The semechanisms are useful for understanding the simultaneous loss of an aromatic ring and -SO- groups in the PSSA fuel cell membrane.

• Korean Journal of Occupational Health Nursing
• /
• v.12 no.1
• /
• pp.5-18
• /
• 2003

The purpose of this study was to survey working conditions of women workers. We conducted a field survey of 504 manufacturing company with many women working from May 13 to June 29, 2002. We focused on only 3 categories of metal, textile and electronics industry. The result were as follows : 1. Subjects were constituted metal 27.0%, textile 37.9% and electronics industry 35.1%. Size distribution was small scale(<50 workers) 38.1%, medium(50-299 workers) 50.2% and large(${\geq}300$ workers) company 11.7%. Women workers' proportion was 43.6% of total workers, 63.8% of total contractors. 2. A medical examination enforcement of contractors workers was very poor in comparison with that of employees(p<0.001). 3. A 53.8% of total companies have conducted shiftwork system and 2-crew 2-shift(12 hours shift system) ranked first, 56.1%(151 companies). 4. Only 61.3% of total companies conducted more than 90 days as legal standard of a maternity leave and only 2.6% of total companies had a day nursery. In conclusion, many strategies for women workers are needed by companies and government. For example, the raising of understanding about maternity protection, social support insurancing of woman worker and occupational health system improvement for contractors and small size companies.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.5
• /
• pp.280-288
• /
• 2016

Microelectronic product consumers may already be expecting another paradigm shift with smarter phones over smart phones, but the current status of microelectronic manufacturing engineering education (MMEE) in universities hardly makes up the pace for such a fast moving technology paradigm shift. The purpose of MMEE is to educate four-year university graduates to work in the microelectronics industry with up-to-date knowledge and self-motivation. In this paper, we present a comprehensive curriculum for a four-year university degree program in the area of microelectronics manufacturing. Three hands-on experienced-based courses are proposed, along with a methodology for undergraduate students to acquire hands-on experience, towards integrated circuits (ICs) design, fabrication and packaging, are presented in consideration of manufacturing engineering education. Semiconductor device and circuit design course for junior level is designed to cover how designed circuits progress to micro-fabrication by practicing full customization of the layout of digital circuits. Hands-on experienced-based semiconductor fabrication courses are composed to enhance students’ motivation to participate in self-motivated semiconductor fab activities by performing a series of collaborations. Finally, the Microelectronics Packaging course provides greater possibilities of mastered skillsets in the area of microelectronics manufacturing with the fabrication of printed circuit boards (PCBs) and board level assembly for microprocessor applications. The evaluation of the presented comprehensive curriculum was performed with a students’ survey. All the students responded with “Strongly Agree” or “Agree” for the manufacturing related courses. Through the development and application of the presented curriculum for the past six years, we are convinced that students’ confidence in obtaining their desired jobs or choosing higher degrees in the area of microelectronics manufacturing was increased. We confirmed that the hypothesis on the inclusion of handson experience-based courses for MMEE is beneficial to enhancing the motivation for learning.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.382-388
• /
• 2010

In this work the replacement material for magnesium alloy was investigated and an optimized design was suggested for the horizontal fin of a fighter's external fuel tank. For the replacement of magnesium alloy, Aluminum alloy, AL 2034-T351, was selected by considering material properties and its procurement. The strength and fracture toughness properties of AL 2034-T351 are stronger than those of magnesium alloy, but the specific weight of AL 2034-T351 is heavier than that of magnesium alloy by 65%. To meet the allowable limit of C.G. shift in the tank, the design of horizontal fin was optimized by reducing the original shape by 20% and resizing the maximum thickness to 7 mm. From the results of the static and dynamic stress analysis for improving the safety factor of the joint section and the joint hole, the radius of curvature in the aft joint section of the new fin was designed as 8.5mm.

• Journal of Korean Academy of Nursing
• /
• v.50 no.5
• /
• pp.658-670
• /
• 2020

Purpose: This study aimed to identify the predictors of blood and body fluid exposure (BBFE) in multifaceted individual (sleep disturbance and fatigue), occupational (occupational stress), and organizational (hospital safety climate) factors, as well as infection prevention behavior. We also aimed to test the mediating effect of infection prevention behavior in relation to multifaceted factors and the frequency of BBFE. Methods: This study was based on a secondary data analysis, using data of 246 nurses from the Shift Work Nurses' Health and Turnover study. Based on the characteristics of zero-inflated and over-dispersed count data of frequencies of BBFE, the data were analyzed to calculate zero-inflated negative binomial regression within a generalized linear model and to test the mediating effect using SPSS 25.0, Stata 14.1, and PROCESS macro. Results: We found that the frequency of BBFE increased in subjects with disturbed sleep (IRR = 1.87, p = .049), and the probability of non-BBFE increased in subjects showing higher infection prevention behavior (IRR = 15.05, p = .006) and a hospital safety climate (IRR = 28.46, p = .018). We also found that infection prevention behavior had mediating effects on the occupational stress-BBFE and hospital safety climate-BBFE relationships. Conclusion: Sleep disturbance is an important risk factor related to frequency of BBFE, whereas preventive factors are infection prevention behavior and hospital safety climate. We suggest individual and systemic efforts to improve sleep, occupational stress, and hospital safety climate to prevent BBFE occurrence.

• Journal of Korean Clinical Nursing Research
• /
• v.18 no.1
• /
• pp.63-73
• /
• 2012

Purpose: The purpose of this study was to compare job satisfaction and nursing performance of nurses on fixed night shifts (FNS) and nurses working three shifts (W3S), to identify the environment of night work and recognition of the viability of the FNS system. Methods: The research was conducted with 106 nurses on FNS and 257 on W3S. The nurses had worked for 1 to 11 years at A hospital, Seoul. Results: Job satisfaction was significantly higher (t=-3.51, p< .001) for nurses on FNS. However, no significant difference was found for nursing performance (t=-1.019, p=.309) between the two groups. Both groups of nurses were mostly satisfied. Subjective fatigue scores (0 to 10 points) during the night for nurses on FNS (6.02) were lower than for W3S nurses (7.28) A high percentage (88.7%) of nurses on FNS indicated a willingness to further participate in FNS. Conclusion: Results indicate that the demonstration FNS system showed its effectiveness. Therefore, efforts are needed to enhance and revitalize FNS and to upgrade the system to control patient transfer time from emergency departments to wards, and to provide nurses needed resources for emergency or intensive care.

• Journal of Agricultural Extension & Community Development
• /
• v.19 no.4
• /
• pp.1041-1066
• /
• 2012

This article aims to analyse the change factor of the industry in rural area. As the regional economy is consist of variety industry in local Revitalization of Rural Economy should consider the growth factor of industry. Analytical method is Shift-Share analysis, analysis data is used GRDP of the 5 target area. Analysis is showed that Agriculture, forestry and fishing is leading position. but Farm population decreased rapidly underway. Side work farmer and industry population is increasing rapidly. the Regional Economic growth inhibitory of 5 Gun is the weakness of the internal factor. especially Competition component is than industry-Mixed component. and the Growth of Agriculture, forestry and fishing is external factor. To improve the regional economy, 5 Gun must improve the fault. and the growth of Agriculture, forestry and fishing should promote the consumption of local products to as the local food system.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.20
• /
• pp.8641-8645
• /
• 2014

The rising trend of breast cancer both in developed and developing countries is a real threat challenging all efforts to screening, prevention and treatment aspects to reduce its impact. In spite of modern preventive strategies, the upward trend of breast cancer has become a matter of great concern in both developed and developing countries. Chittaranjan National Cancer Institute is a premier regional cancer institute in eastern region of India catering to a large number of cancer patients every year. A pilot case control study of fifty breast cancer patients and 100 matched controls was conducted during 2013 to evaluate the effects of habitual factors like working in night shift, not having adequate sleep, and not sleeping in total darkness on breast cancer of women. The study revealed that not sleeping in total darkness was associated with higher odds of outcome of breast cancer of women. This positive correlation can play a vital role in formulation of preventive strategies through life style modification.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.12
• /
• pp.560-567
• /
• 2008

In this paper, we discuss a simple and straightforward binarization procedure which can generate black/white comics from the video frame image. Generally, the region of human's skin is colored white or light gray, while the dark region is filled with the irregular but regular patterns like hatching in most of the black/white comics. Note that it is not enough for simple threshold method to perform this work. Our procedure is decoupled into four processes. First, we use bilateral filter to suppress noise color variation and reserve boundaries. Then, we perform mean-shift segmentation for each similar colored pixels to be clustered. Third, the clustered regions are merged and extended by our region extension algorithm considering each color of their regions. Finally, we decide which pixels are on or off using by our dynamic binarization method based on the HSV color model. Our novel black/white cartooning procedure was so successful to render comic cuts from a well-known cinema in a resonable time and manual intervention.