• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.147-155
• /
• 1999

The film thickness and shape of elastohydrodynamic lubrication is measured by optical interferometer, which is the most precise method for EHL film measurement. However the interpretation of the image pattern from optical viscometer is not easy for two-dimensional shape. A newly developed method of image processing makes it possible to evaluate the film thickness and shape in every point of contact region with two dimensional aspects. In this study, we captured film shape of EHL film from the monochromatic incident light with the Image processing method, which uses phase shift method, and obtained the image analysis method for gray level image in order to qualitatively evaluate film shapes.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.471-476
• /
• 2004

We propose an analytical model to estimate the influence of a merger on the thermal SZ effect. Following observations we distinguish between subsonic and transonic mergers. Using analytical velocity fields and the Bernoulli equation we calculate the excess pressure around a moving subcluster for an incompressible subsonic gas. Positive excess around the stagnation point and negative excess on the side of the subcluster lead to characteristic signatures in the SZ map, of the order of $10\%$ compared to the unperturbed signal. For a transonic merger we calculate the change in the thermal spectral SZ function, resulting from bow shock accelerated electrons. The merger shock compression factor determines the power law tail of the new non-thermal electron population and is directly related to a shift in the crossover frequency. This shift is typically a few percent towards higher frequencies.

• Industrial Engineering and Management Systems
• /
• v.6 no.2
• /
• pp.125-135
• /
• 2007

An automated guided vehicle (AGV) system is a group of collaborating unmanned vehicles which is commonly used for transporting materials within manufacturing, warehousing, or distribution systems. The performance of an AGV system depends on the dispatching rules used to assign vehicles to pickup requests, the vehicle routing protocols, and the home location of idle vehicles, which are called dwell points. In manufacturing and distribution environments which emphasize just-in-time principles, performance measures for material handling are based on response times for pickup requests and equipment utilization. In an AGV system, the response time for a pickup request is the time that it takes for the vehicle to travel from its dwell point to the pickup station. In this article, an exact dynamic programming algorithm for selecting dwell points in a tandem-loop multiple-vehicle AGV system is presented. The objective of the model is to minimize the maximum response time for all pickup requests in a given shift. The recursive algorithm considers time restrictions on the availability of vehicles during the shift.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1476-1480
• /
• 1987

This paper proposes a design method for SCLA(sequential CMOS Domino Logic Array) using 1-level CMOS Domino Logic and Stable Shift Register Latch. Also an algorithm to generate a test sequence and a test procedure for the SCLA are presented. The SCLA has advantages of low power consumption, high density and high speed, and performs hazard-and race-free logic operation, because of using SSRL(Stable Shift Register Latch). By using the proposed test method, all of stuck-at, cross-point, stuck-on and stuck-open faults in SCLA are detected by short test sequence.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.161-163
• /
• 2006

This paper introduce the technology of peak demand reduction using automatic water tank pumping system on the apartment. That systems on the apartments installed water tank can control pumping(electricity) demand. Generally, system peak demand is occurred at the same time on workday and many water pumps consume electric power randomly. At this point, shift of operating time of water pump can reduce peak demand using automatic water tank pumping system. We were operating this system on some apartments for test of effect of peak demand reduction. and we represent result of demand shift. This result suggests that spread of the automatic water pumping system can contribute to reduce system peak demand and reduce system operation cost.

• Journal of Contemporary Eastern Asia
• /
• v.10 no.1
• /
• pp.55-71
• /
• 2011

China has been experiencing high economic growth along with massive change in its industrial structure. How will the industrial structure change affect the Chinese economy? Similar changes were observed by Japan, when the Japanese banking system fell into a structural failure in terms of the inability to respond to the paradigm shift from "catching up" to "frontier economy." This paper is undertaken to highlight the lessons that China can learn from Japan's prolonged financial slump. We point out that big cities in China have already shifted to frontier economy and major provinces are on the same trend. We argue that in spite of economic reform reshaping the Chinese banking system, the financing pattern of state owned commercial banks (SOCB) is not in line with the industrial change. The Chinese banking system should be overhauled or transformed to respond to the increasing uncertainty along with the paradigm shift. Otherwise, China may fall into the same dilemma that Japan had faced in its industrial structure change.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.45-46
• /
• 2013

멀티레벨 고압인버터 토폴로지 중 저압 Power Cell를 이용하여 고압을 출력하는 Cascaded 방식이 산업계에서는 널리 사용되고 이다. 최근 제품화된 Cascaded 방식은 크게 두 가지 형태로 구분할 수 있다. 저압 Power Cell에 단상 H-Bridge를 이용한 Cascaded H-Bridge 멀티레벨 인버터와 단상 NPC(Neutral Point Clamped) 토폴로지를 적용한 Cascaded NPC 멀티레벨 인버터이다. 이 중 Cascaded NPC 멀티레벨 인버터의 경우 적은 수의 셀을 사용하여 CHB와 동일한 출력 레벨을 생성할 수 있으며, NPC 방식의 고압 인버터 고유의 장점을 모두 구현할 수 있다. 반대로 CHB Type과 NPC type의 단점인 복잡한 구조의 Phase Shift Transformer와 DC_Link 중성점 전압이 변동하는 단점 또한 나타나게 된다. 본 논문에서는 Cascaded NPC 멀티레벨 인버터의 이러한 단점을 극복하기 위한 새로운 방식의 Phase Shift Transformer와 NPC Power Cell의 중성점 전압 변동을 줄일 수 있는 기법에 대해 설명하고 이 기법에 대한 타당성을 모의시험을 통해 검증하였다.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1559-1562
• /
• 2009

The influence of hot pressing on the pore structures of Nafion membranes was investigated by observing the Nafion before and after hot pressing with $^1H$ nuclear magnetic resonance (NMR) spectroscopy. The freezing point depression and chemical shift data of water in the Nafion indicated the presence of two different pore size ranges in Nafion. Hot pressing mainly reduced the sizes and number of the big pores. The reduction of water uptake and proton conductivity after hot pressing was explained by this variation of pore size and number. We demonstrated the potential application of chemical shift data and NMR cryoporometry experiments to measure the relative pore sizes, on a nano scale, and numbers.

• Tribology and Lubricants
• /
• v.16 no.5
• /
• pp.317-323
• /
• 2000

The film thickness and shape of elastohydrodynamic lubrication is measured by optical interferometer, which is the most precise method for EHL film measurement. However, the interpretation of the image pattern from optical viscometer is not simple for two-dimensional shape. A newly developed method of image processing makes it possible to evaluate the film thickness and shape in every point of contact region with two dimensional aspects. In this study, we captured the film shape of EHL film by the monochromatic incident light and analyzed the film thickness with the image processing method, which uses phase shift method. From the values of intensity in fringes, the qualitative feature of film thickness in the contact area are obtained by using Zernike polynomial

• Journal of Korean Society on Water Environment
• /
• v.22 no.3
• /
• pp.397-405
• /
• 2006

Since the first sewage treatment plant had been in operation in 1976, the Korean water industry was in the logarithmic growing stage corresponded with the country's rapid economic expansion up to late 1990's. Unfortunately, however, the current industry status seems to require not only new paradigm for water environment but the development of new growth engine, since there are various warning signals for stalling growth from the field engineers to policy makers. Because of sharing of the awareness, the Korean government recently launched an ambitious development policy for water industry. This paper describes the new paradigm-shift in water environment in view point of the water as renewable resources. Based on the new paradigm, it has been suggested the prerequisite conditions to meet for the development of a new Korean water industry.