• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.2 no.2
• /
• pp.109-114
• /
• 1998

The induction of crassulacean acid metabolism(CAM) characterized by day/night acid fluctuation was investigated in leaves from 10 days exposure to elevated $CO_2$ concentration(1,000 ${\mu}L\;L^{-1}CO_2).$ For Pereskia aculeata, have $C_3-like$ gas exchange pattern in well watered condition and shift into CAM-like in water stress, showed a more typical CAM-like diurnal acid fluctuation. Whereas the massive diurnal fluctuation of acidity in typical CAM of Kalanchoe rosea was declined. The effect of short-term exposure to various concentrations of $CO_2$ on titratable acidity in P. aculeata and K. rosea was also investigated. To investigate the response of various $CO_2$ concentrations, four different $CO_2$ levels(350, 700, 1,000 and 1,500 ${\mu}L\;L^{-1})$ were imposed for 24hr and measured the titratable acidity at 06:00, when the acidity was maximum, and 14:00, when the acidity was minimum. The accumulation of acid in P. aculeata was enhanced markedly by higher concentration of $CO_2,$ while the level of acidity in f rosea did not highly respond to $CO_2.$ A notable difference between P. aculeata and K. rosea was the response of de-acidification to a higher concentration of $CO_2$ Increasing with $CO_2,$ the degree of do-acidification of P. auleata was increased while that of K. rosea was depressed.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.4
• /
• pp.38-45
• /
• 1994

It is very imprtant and necessary to predict luminous enviroment in an interior space. This paper has de scribed about energy saving and evaluated interior visual environment in a office building having on/off turning control lighting system utilizing daylight. In order to predict the interior varior illumination distribution, the scale model w a m~a de and examined under various conditions, such ad difference of window glass, and color pattern of wall, floor, and also ceiling lighting system type. Ths paper suggests that basic fundamental data of lighting design ~rformancein the concept and schematic stages of design.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.3
• /
• pp.351-360
• /
• 2013

PURPOSE: The purpose of this study was to investigate the effects of observed action gait training on stroke patients. METHODS: 22 subjects were randomized into two groups. The observed action gait training performed that watched a video of normal gait before gait training and the general gait training without watching it. The experimental group(n=11) performed observed action gait training and the control group(n=11) performed general gait training. Both group received gait training for 3 times per week during 8 weeks. RESULTS: The experimental group showed significant differences in the cadence, gait velocity, stride, step, single limb support, double limb support, stride length and step length(p<.05). The control group showed significant differences only in the stride(p<.05). CONCLUSION: The observed action gait training affected coordination and weight shift, as well as symmetry of the body. Plasticity of the brain was facilitated by repetitive visual and sensory stimulation. The observed action gait training promoted the normal gait by watching the normal gait pattern. In conclusion, motor learning through the sensory stimulation promotes brain plasticity that could improve motor function, and observed action gait training indirectly identified stimulated brain activities.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.455-467
• /
• 2001

In this study, the stacking phase shift effect on the effective property and stress distribution was investigated for 8-harness satin weave textile composites under uni-axial tension. Textile configurations with varied phase shifts were modeled by unit cells and repeating boundary conditions were applied at the outer periodic surfaces. The effective property and stress were calculated by the unit cell analysis using macro-element to reduce the computational resource. It was found that stresses were dependent on the variation of tow arrangement of adjacent layers. The in-phase and the shifted configurations showed large differences in the stress distribution pattern. The stress level was very high in the resin region and the distribution of the maximum stresses was widely scattered.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1549-1552
• /
• 2003

Semiconductor gas sensor using tin oxide as sensing material has been used to detect gases based on the fact that impedance of the sensing material varies when the gas sensor is exposed to the gases. This variation comprises of two parts. The first one is variation in resistance of the sensing material and the other is expressed in terms of the sensor capacitance variation. Normally, only variation of the sensor resistance is considered. In this paper, using AC measurement with a capacitor-coupled inverting amplifier circuit, both changes in the sensor resistance and variations in the sensor capacitance were investigated. These characteristics were represented as magnitude gain and phase shift of AC signal at a specific frequency after passing it through the sensor and the designed circuit. A two-stage artificial neural network, which utilized the information above, was employed to identify and quantify three combustible gases: methane, propane and butane. The network outputs were approximately proportional to concentrations of test gases with reasonable level of error.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.3
• /
• pp.335-342
• /
• 1999

The purpose of present research is to develop and efficient numerical method for the calculation of potential flow and predict the wave-making resistance for the application to ship design of tuna purse seiner. Havelock was considered the wave resistance of a post extending vertically downwards through the water from the surface, its section by a horizontal plane being the same at all depths and having its breadth small compared with its length. This enables us to elucidate certain points of interest in ship resistance. However, the ship has not infinite draft. So, the problem which is investigated ind detail in this paper is the wave resistance of a mathematical quadratic model in a uniform stream. The paper deals with the numerical calculation of potential flow around the series 60 with forward velocity by the new slender ship theory. This new slender ship theory is based on the asymptotic expression of the Kelvin-source, distributed over the small matrix at each transverse section so as to satisfy the approximate hull boundary condition due to the assumption of slender body. The numerical results using the panel shift method and finite difference method are compared with the experimental results for wigley mono hull. There are no differences in the wave resistance. However, it costs much time to compute not only wave resistance but also wave pattern over some range of Froude numbers. More improvements are strongly desired in the numerical procedure.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.18 no.4
• /
• pp.547-555
• /
• 2011

Purpose: The purpose of this study was to identify the relationship between professional self-concept, professional autonomy, self-esteem, and job satisfaction of clinical nurses. Method: Data were collected from a convenience sample of 289 clinical nurses who worked in one of 4 hospitals located in B City. Data were analyzed using descriptive statistics, t-test, ANOVA, Pearson correlation coefficient, and multiple regression. Results: There were significant differences in job satisfaction according to marital status, current position, shift pattern, and average income. There was a significant positive correlation between professional self-concept and professional autonomy, self-esteem and job satisfaction. Job satisfaction showed a significant positive correlation with professional autonomy and self-esteem. The significant factors influencing job satisfaction were professional self-concept, self-esteem and professional autonomy, which explained 29.5% of the variance in job satisfaction. Conclusion: The results of this study indicate that the important role-related variables of professional self-concept, self-esteem and professional autonomy of clinical nurses are significantly related, and that as, professional self-concept is an important factor for job satisfaction of clinical nurses, strategies to increase professional self-concept need to be developed.

• Journal of Microbiology
• /
• v.33 no.2
• /
• pp.120-125
• /
• 1995

.betha.-galactosidase activity of Escherichia coli cells containing operon fusion nhaA'-'lacZ was monitored to study the regulation of expression of nhaA gene under various conditions. The expression of the fusion was enhanced only by chemicals containing Na$^{+}$ or Li$^{+}$. This Na$^{+}$ or Li$^{+}$. This Na$^{+}$(Li$^{+}$)-specific enhancement of .betha.-galactosidase activity represented the increase in the rate of synthesis of .betha.-galactosidase rather than the decrease in the breakdown rate. The induction pattern was influenced by copy numbers of the gene. Induction by Na$^{+}$ or Li$^{+}$ was concentration and time dependent, reaching maximum 5-6 fold induction after 2 hours at 0.4-0.5 M for Na$^{+}$ or at 0.25-0.35 M for Li$^{+}$, Although the expression was induced at much lower concentration of Na$^{+}$ at alkaline pH values than at neutral pH in the presence of Na$^{+}$, alkaline pH itself did ot induced the expression of the fusion in the absence of Na$^{+}$. Temperature shift and growth phase of culture did not affect the level of induction.he level of induction.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.4
• /
• pp.274-278
• /
• 2001

Polymer membranes composed of N, N-dimethylaminoethyl methaccrylate(DMAEMA) and acrylamide(AAm)(or ethyl acrylamide(EAAm) were prepared to demonstrated the thermo-control of solute permeation. Poly DMEMA has a lower critical solution temperature(LCST) at around 50$\^{C}$ in water, With the copolymerization of DMAEMA with AAm (or EAAm) a shift in the LCST to a lowere temperature was observed, probably due to the formation of hydrogen bonds between the amide and N-N-dimethylamino groups. However, the temperature-induced phase transition of poly(DMAEMA-co-EAAm) did not show a similar trend to that of poly(DMAEMA- co-AAm) in the gel state. The hydrogen bonds in poly(DMAEMA-co-EAAm) were significantly disrupted with the formation a gel network, which led to a difference in the swilling behavior of polymer gels in response to temperature. To apply these polymers to temperature-sensitive sol-ute permeation, polymer membranes were prepared. The permeation pattern of hydrocortisone, used as the model solute, was explained based on the temperature-sensitive swelling behavior of the polymer membranes.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.17-23
• /
• 2002

A cylindrical capacitance-type spindle displacement sensor was developed and its effectiveness as a system to monitor cutting forces during hard turning was tested in this research. The sensor was installed between the face of spindle cover and the chucking element and measured pure radial motion of the spindle under the condition with presence of roundness error at measured surface. To prove the effectiveness of the developed system hard aiming tests using ceramic inserts and tool steel as workpiece were conducted. The workpiece was hardened up to 65 Rc. The variations of pure radial motion of the spindle ware measured during the cutting tests. The signals from the sensor showed the same pattern of cutting force variations from the tool dynamometer due to the progress of tool wear. As the flank wear of the ceramic tool increased both static component of cutting forces and the amount of center shift of spindle orbit increased, Results from the research showed that the developed sensor could be utilized as an effective and cheap on-line sensing device to monitor cutting conditions and tool performance in the un-manned machining center.