• Tribology and Lubricants
• /
• v.16 no.5
• /
• pp.317-323
• /
• 2000

The film thickness and shape of elastohydrodynamic lubrication is measured by optical interferometer, which is the most precise method for EHL film measurement. However, the interpretation of the image pattern from optical viscometer is not simple for two-dimensional shape. A newly developed method of image processing makes it possible to evaluate the film thickness and shape in every point of contact region with two dimensional aspects. In this study, we captured the film shape of EHL film by the monochromatic incident light and analyzed the film thickness with the image processing method, which uses phase shift method. From the values of intensity in fringes, the qualitative feature of film thickness in the contact area are obtained by using Zernike polynomial

• Korean Journal of Human Ecology
• /
• v.15 no.6
• /
• pp.1073-1081
• /
• 2006

The development of foundation garment pattern on the typical adult women's body was carried out. By means of the flatted body surface shell, the foundation garment pattern was developed. And its fitting test also performed. The results of this study can be summarized as follows; 1. The investigated Foundation basic pattern was made by the allowing the maximum bust size without any surplus since it was based on the tight-fitted model drawing technique. The investigated the completed pattern was designed in three parts of front and back body, including bust. 2. The result showed by overlapping the torso basic pattern foundation and body surface development selected from body almost the same except for the shift of dart position. 3. The result by overlapping basic pattern 3 existing basic patterns. On the basis of top-bust line showed that the setting up the volume of dart of bust and its waist affect the appearance of model. Especially, it was found that the above result was related to the bust and under bust line. 4. The result of the wearing test of 3 existing basic patterns and basic pattern of this study revealed that the mean values of whole items were higher than average in type P and type E. The fitting & position of under-bust line and extent of wrapping bust showed the high points in the current study and type of P. The result of evaluating the whole appearance in three points(front, side, back) showed different according to the every basic foundation garment pattern.

• Journal of Nutrition and Health
• /
• v.53 no.5
• /
• pp.488-502
• /
• 2020

Purpose: This study examined the factors influencing Nutrition Quotient for adults (NQ-A), focusing on workers in the manufacturing industry. Methods: The participants were 738 industrial workers in Gwangju. Their dietary information was analyzed using a questionnaire of NQ-A, which consisted of 21 checklist items and the general characteristics of the subjects. The scores of NQ-A and its 4 factors (balance, moderation, diversity, and dietary behavior) were calculated according to the general characteristics of subjects. The data were analyzed using a χ² test, t-test, correlation, and multiple regression using SPSS 21.0 program. Results: The mean NQ-A score was 45.3 for the total subjects, indicating a low grade. Non-shift workers showed significantly higher scores for balance, diversity, and moderation factors than shift workers. Forty-three (8.7%) shift workers and 123 (50.8%) non-shift workers had good NQ-A scores, whereas 453 (91.3%) shift workers and 119 (49.2%) non-shift workers required monitoring for nutrition. The significant influencing factors of NQ-A were the working pattern (p < 0.001), gender (p < 0.001), family composition (p < 0.001), age (p < 0.001), and household income (p < 0.001). As a result of multiple regression analysis, there was a significant difference in the NQ-A score for moderation (F = 141.930, p < 0.001), diversity (F = 98.998, p < 0.001), balance (F = 52.329, p < 0.001), and dietary behavior (F = 12.895, p < 0.001). As a result, shift work and gender had the greatest influence on the balance (β = -0.372, p < 0.001), diversity (β = -0.316, p < 0.001), and moderation (β = -0.507, p < 0.001) factors in NQ-A. Gender had the most influence on the dietary behavior in NQ-A. Conclusion: Shift work and gender were significant factors affecting NQ-A. To manage workers' health better, it will be necessary to prepare a nutrition education program according to the type of working pattern and gender.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.803-806
• /
• 2007

Since the different characteristics from the PRNG (Pseudo Random Number Generator) or various deterministic devices such as arithmetic processing units, new concepts and test methods should be suggested in order to test TRNG (Ture Random Number Generator). Deterministic devices can be covered by ATPG (Automatic Test Pattern Generation), which uses patterns generated by cyclic shift registers due to its hardware oriented characteristics, pure random numbers are not possibly tested by automatic test pattern generation due to its analog-oriented characteristics. In this paper, we studied and analyzed a hardware/software combined test method named Diehard test, in which we apply continuous pattern variation to check the statistics. We also point out the considerations when making random number tests.

• Journal of Nutrition and Health
• /
• v.49 no.6
• /
• pp.495-505
• /
• 2016

Purpose: This study was conducted to investigate and analyze the association between stress from shift and non-shift work as well as the effects living habits have on eating habits in order to identify why and how workers can improve their health and form proper eating habits for higher working efficiency. Methods: The subjects of this study were 361 workers from K manufacturing company from April 7 to 11, 2014 and they were surveyed using a questionnaire. The subjects were divided into two groups according to working pattern: shift workers (n = 216) and non-shift workers (n = 110). Results: In the general characteristics, there were significant differences in age, work career, work time, marriage, monthly income, and education levels between the two groups. For healthy behaviors, significant differences in subjective health status, moderate physical activity, drinking, smoking, and sleep time were observed between shift workers and non-shift workers. For eating habits, scores of non-shift workers having a regular mealtime, balanced meal composition, and vegetable and seaweed intakes were significantly higher than those of shift workers. The sum score of dietary habits in non-shift workers was also significantly lower than that in shift workers (p < 0.05). Total job stress score did not significantly differ between the two groups. Conclusion: The sum of eating habit scores according to work types was $16.1{\pm}0.6$ in non-shift workers and $14.0{\pm}0.3$ in shift workers. These results suggest that it is necessary to provide food suitable to characteristics of different workers according to work type which should be provided along with daily nutrition counseling to help subjects recognize their status.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.1
• /
• pp.15-21
• /
• 2012

Purpose: Image Guided Radiation Therapy (IGRT) has been carried out using On-Board Imager system (OBI) in Asan Medical Center. For this reason, This study was to analyze and evaluate the impact on Cone-Beam CT according to variation of material and respiration. Materials and Methods: This study was to acquire and analyze Cone-Beam CT three times for two material: Cylider acryl (lung equvalent material, diameter 3 cm), Fiducial Marker (using clinic) under Motion Phantom able to adjust respiration pattern randomly was varying period, amplitude and baseline vis-a-vis reference respiration pattern. Results: First, According to a kind of material, when being showed 100% in the acryl and 120% in the Fiducial Marker under the condition of same movement of the motion phantom. Second, According to the respiratory alteration, when being showed 1.13 in the baseline shift 1.8 mm and 1.27 in the baseline shift 3.3 mm for acryl. when being showed 1.01 in 1 sec of period and 1.045 in 2.5 sec of period for acryl. When being showed 0.86 in 0.7 times the standard of amplitude and 1.43 in 1.7 times the standard of amplitude for acryl. when being showed 1.18 in the baseline shift 1.8 mm and 1.34 in the baseline shift 3.3 mm for Fiducial Marker. when being showed 1.0 in 1 sec of period and 1.0 in 2.5 sec of period for Fiducial Marker. When being showed 0.99 in 0.7 times the standard of amplitude and 1.66 in 1.7 times the standard of amplitude for Fiducial Marker. Conclusion: The effect of image size of CBCT was 20% in the case of Fiducial marker. The impact of changes in breathing pattern was minimum 13% - maximum 43% for Arcyl, min. 18% - max. 66% for Fiducial marker. This difference makes serious uncertainty. So, Must be stabilized breathing of patient before acquiring CBCT. also must be monitored breathing of patient in the middle of acquire. If you observe considerable change of breathing when acquiring CBCT. After Image Guided, must be need to check treatment site using fluoroscopy. If a change is too big, re-acquiring CBCT.

• Toxicological Research
• /
• v.17
• /
• pp.329-333
• /
• 2001

Apoptosis is the normal physiological process of cell death essential for the maintenance of homeostasis. The function of nicotinamide adenine dinucleotide (NAD) and adenine diphosphate (ADP) ribosylation (transfer of ADP-ribose to proteins) reactions in modifying apoptosis have recently been of great interest. Recently. CD38. a type 2 transmembrane glycoprotein expressed in hematopoietic and non hematopoietic cell lines. has been reported to possess NAD glycohydrolase activity (Han. 1999) and PC-1 and CD38 NADase regulates T cells by inhibition of phosphodiesterase/pyrophosphatase activity of PC-1 by its association with glycosaminoglycan (Hozada et al., 1999). Sindhuphak et al. (2000) has reported that cervical cancer cells can be differentiated from normal cells by using FTIR (Fourier-Transformed Infrared) technique. which has characterized shifts to be due to the phosphodiester bond in nucleic acid. protein amide I&II. carbohydrate and glycogen bands. Mechanisms how phosphodiester bond shift in cervical cancer cells as compared to control cells remain to be elucidated. Suramana et al. (2000) as well as Lohitnavy and Sinhaseni (1998) have studied methomyl and colchicine effects in rat splenocytes. Lactate Dehydroge-nase Isozymes 3 (LDH3) and LDH4 were observed to increase transiently and subsided in plasma of rats exposed to 6~8 mg/kg methomyl after 48 hours. Phosphodiester bond shift of nucleic acid. detected by FTIR. was also reported (Suramana et al., 2000). We report here, after analysis of bond shift patterns. a similar bond shifts detected by FTIR spectrum observed in human cervical cells and splenocytes of rats exposed orally to 2~8 mg/kg methomyl as well as rats exposed to colchicine 2~6 mg/kg orally.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.28.2-28.2
• /
• 2010

We have investigated seven Extreme-Ultraviolet (EUV) bright points in the active region (AR 10926) on 2006 December 2 by the EUV imaging spectrometer (EIS) onboard Hinode spacecraft. We determined their Doppler velocities and non-thermal velocities from 15 EUV spectral lines (log T=4.7-7.2) by fitting each line profile to a Gaussian function. We present the Doppler velocity map as a function of temperature which corresponds to a different height. As a result, these active region bright points show two different types of characteristics. Type 1 bright point shows a systematic increase of Doppler velocity from -68 km/s (blue shift) at log T=4.7 to 27 km/s (red shift) at log T=6.7, while type 2 bright points have Doppler velocities in the range of -20 km/s and 20 km/s. Using MDI magnetograms, we found that only type 1 bright point was associated with the canceling magnetic feature at the rate of $2.4{\times}10^{18}$ Mx/hour. When assuming that these bright points are caused by magnetic reconnection and the Doppler shift indicates reconnection out flow, the pattern of the Doppler shift implies that type 1 bright point should be related to low atmosphere magnetic reconnection. We also determined electron densities from line ratio as well as temperatures from emission measure loci using CHIANTI atomic database. The electron densities of all bright points are comparable to typical values of active regions (log Ne=9.9-10.4). For the temperature analysis, the emission loci plots indicate that these bright points should not be isothermal though background is isothermal. The DEM analysis also show that while the background has a single peak distribution (isothermal), the EUV bright points, double peak distributions.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.39.1-39.14
• /
• 2023

Background: Diseases affecting the lungs and airways contribute significantly to the global burden of disease. The problem in low- and middle-income countries appears to be exacerbated by a shift in global manufacturing base to these countries and inadequate enforcement of environmental and safety standards. In Ghana, the potential adverse effects on respiratory function associated with occupational wood dust exposure have not been thoroughly investigated. Methods: Sixty-four male sawmill workers and 64 non-woodworkers participated in this study. The concentration of wood dust exposure, prevalence and likelihood of association of respiratory symptoms with wood dust exposure and changes in pulmonary function test (PFT) parameters in association with wood dust exposure were determined from dust concentration measurements, symptoms questionnaire and lung function test parameters. Results: Sawmill workers were exposed to inhalable dust concentration of 3.09 ± 0.04 mg/m³ but did not use respirators and engaged in personal grooming habits that are known to increase dust inhalation. The sawmill operators also showed higher prevalence and likelihoods of association with respiratory symptoms, a significant cross-shift decline in some PFT parameters and a shift towards a restrictive pattern of lung dysfunction by end of daily shift. The before-shift PFT parameters of woodworkers were comparable to those of non-woodworkers, indicating a lack of chronic effects of wood dust exposure. Conclusions: Wood dust exposure at the study site was associated with acute respiratory symptoms and acute changes in some PFT parameters. This calls for institution and enforcement of workplace and environmental safety policies to minimise exposure at sawmill operating sites, and ultimately, decrease the burden of respiratory diseases.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.105-115
• /
• 2011

In Vision-based Intelligent Transportation System(ITS) the segmentation of road region is a very basic functionality. Accordingly, in this paper, we propose a region segmentation method using adaptive pattern extraction technique to segment road regions and sky regions from original images. The proposed method consists of three steps; firstly we perform the initial segmentation using Mean Shift algorithm, the second step is the candidate region selection based on a static-pattern matching technique and the third is the region growing step based on a dynamic-pattern matching technique. The proposed method is able to get more reliable results than the classic region segmentation methods which are based on existing split and merge strategy. The reason for the better results is because we use adaptive patterns extracted from neighboring regions of the current segmented regions to measure the region homogeneity. To evaluate advantages of the proposed method, we compared our method with the classical pattern matching method using static-patterns. In the experiments, the proposed method was proved that the better performance of 8.12% was achieved when we used adaptive patterns instead of static-patterns. We expect that the proposed method can segment road and sky areas in the various road condition in stable, and take an important role in the vision-based ITS applications.