• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.1
• /
• pp.36-43
• /
• 2006

The principal aim of this field study was to determine the concentrations and emissions of gaseous contaminants such as ammonia and hydrogen sulfide in the different types of pig buildings in Korea and allow objective comparison between Korea and the other countries in terms of pig housing types. This field study was performed from May to June and from September to October in 2002. Pig buildings investigated in this research were selected in terms of three criteria; manure removal system, ventilation mode and growth stage of pig. Measurements of concentration and emission of ammonia and hydrogen sulfide in the pig buildings were done in 5 housing types and the visited farms were 15 sites per each housing type. Concentrations of ammonia and hydrogen sulfide were measured at three locations of the central alley in the pig building and emission rates of them were estimated by multiplying the average concentration($mg/m^3$) measured near the air outlet by the mean ventilation rate($m^3/h$) and expressed either per pig of liveweight 75kg(mg/h/pig) or per area($mg/h/m^2$). Concentrations of ammonia and hydrogen sulfide in the pig buildings were averaged to 7.5 ppm and 286.5 ppb and ranged from 0.8 to 21.4 ppm and from 45.8 to 1,235 ppb, respectively. The highest concentrations of ammonia and hydrogen sulfide were found in the mechanically ventilated buildings with slats; 12.1 ppm and 612.8 ppb, while the lowest concentrations of ammonia and hydrogen sulfide were found in the pig buildings with deep-litter bed system(2.2 ppm) and the naturally ventilated pig buildings with manure removal system by scraper(115.2 ppb), respectively(p<0.05). All the pig buildings were investigated not to exceed the threshold limit values(TLVs) of ammonia(25 ppm) and hydrogen sulfide(10 ppm). The mean emissions of ammonia and hydrogen sulfide per pig(75kg in terms of liveweight) and area($m^2$) from pig buildings were 250.2 mg/h/pig and 37.8 mg/h/pig and $336.3mg/h/m^2$ and $50.9mg/h/m^2$, respectively. The pig buildings with deep-litter bed system showed the lowest emissions of ammonia and hydrogen sulfide(p<0.05). However, the emissions of ammonia and hydrogen sulfide from the other pig buildings were not significantly different(p>0.05). Concentrations and emissions of ammonia and hydrogen sulfide were relatively higher in the pig buildings managed with deep-pit manure system with slats and mechanical ventilation mode than the different pig housing types. In order to prevent pig farm workers from adverse health effect caused by exposure to ammonia and hydrogen sulfide in pig buildings, they should wear the respirators during shift and be educated sustainably for the guideline related to occupational safety.

• Research in Community and Public Health Nursing
• /
• v.4 no.1
• /
• pp.58-66
• /
• 1993

The purpose of this study was to explore the condition of periodic medical examination, and health care services in industries. This will offer some basic data in developing industrial nursing care requirements. To achieve this goal a self-administered questionnaire (developed by the academic affairs of community health nursing) was provided to the nurses working in 40 industries from Dec 20, 1992 to Jan 20, 1993. The statistical computer package SAS, along with t-test, and ANOVA was used to manipulate the date. The results were as follows : 1. General Characteristics: The greater part of the industries studied were manufacturing company, with over 500 employees. The shift system was used with most companies using one or three shifts, and 75.0% of them were organized with Industrial Safety and Health Committees. 2. Periodic Medical Examination : Most of the workers were receiving periodic medical examination from a designated hospital (96.7%). Of those 15.8% had a close medical examination. In the medical examination 9.4% were evaluated at 'C' and 3.8 were evaluated at 'D'. About 55.0% of those workers received the result of the periodic medical examination individually(95.0%). 3. Special Medical Examination : The rate of those who were receiving special medical examination was 98.4% and about 11.7% were evaluated at 'C' and 3.9% were evaluated at 'D'. Those who had any health problems (54.2%) were receiving follow-up care, 52.4% of them had medical treatment while working. The health care managers in the company consulted 97.1% of them who had any suspicious signs and symptoms of occupational diseases. 4. Health Care Services : The average score of health care services was 13.8 out of a possible 28 point. The score of health education and health assessment, was lower than medical diagnosis and environmental hygiene. There were no significant differences in health care services according to the size of the industries(F=.95, P=.429). The score of health care services was higher in the worker who had better health and showed significant differences (F=4.50, p=.025).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6627-6640
• /
• 2015

This study was performed to determine the complaint rates of musculoskeletal symptoms and its association with related factors among manufacturing workers. The self-administered questionnaires were given to 856 male with 50 or less employees in manufacturing industries. As a results, complaint rates of work-related musculoskeletal symptoms of the body sites was 61.2% for shoulders, 55.4% for low back, 55.3% for neck, 38.6%, for legs/feet, 32.2% for hands/wrists/fingers and 26.9% for arms/elbows. In logistic regression analysis of significant factors related with musculoskeletal symptoms of body sites, neck was related with marital status, subjective health status, smoking, drinking coffee and occupational stress, shoulders was related with job tenure, shift work, visiting out-patient department and occupational stress, arms/elbows was related with sleeping time, experience of sick absence and occupational stress, hands/wrists/fingers was related with age, smoking, drinking coffee, working hour, job position, job tenure, visiting out-patient department and occupational stress, low back was related with educational level, BMI, sleeping time, job position, job tenure, visiting out-patient department and occupational stress and legs/feet was related with marital status, job position, job tenure, history of hospitalization and occupational stress.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.89-96
• /
• 1981

Of 2,740 industries in Jeonbug area which are covered by industrial insurance policy, 462 facilities which the accidents related to industry occured during the year of 1979 were studied. and the results are summarized as follows: 1. The accidents related to industry occured in 462 industries of the total 2,740 industrial facilities in Jeonbug area as of 1979. 2. The incidence rate of accident per 1,000 workers was 34.3 (49.2 in male workers and 12.8 in female workers), the frequency rate of the total industries in jeonbug area was 13.36, and severity rate was 1.3. 3. The frequency rates and severity rates by type of industry in study area were quite different to compare with those of national rates. 4. The incidence rate of construction industry was 223.6 per 1,000 workers, and that of transportation-communication industries were 78.6. 5. The proportion of industrial accidents of $20{\sim}24$ age group was 22.1 per cent of the total accidents, and the proportions decreased according to age increase. 6. The incidence rate in the industry having less than 49 workers was 20.6 per 1,000 workers, that of industry with $50{\sim]99$ workers was 26.7, that of industry with $100{\sim}199$ was 51.9, that of industry with $200{\sim}499$ was 80.2 and that of with more than 500 worker was 40.7. 7. The accidents which occured in the workers with experience of less than one year was 69.4 per cent of the total accidents, otherwise, the longer the workers have worked the less accident they have. 8. The most accidents occured in tile shift between 10 to 12 o'clock, and 16 to 18 hour 9. The primary causes of the industrial accidents were found to be collisions, machinery falling objects and falls. 10. The site of injury by type of industry were quite different, and the major site of injury was finger. 11. The laceration and open injuries of the accidents related to industry were 37.2 per cent of the total cases, and fractures or dislocations were 23.5 per cent, and contusions were 6.5 per cent. 12. Death rate of industrial accident was 5.0 per 10,000 workers, and those of industry were 47.6 in transportation, 42.8 in construction industry, 24.4 in mine industry, and 2.0 in manufacturing industry.

• Journal of radiological science and technology
• /
• v.34 no.4
• /
• pp.351-357
• /
• 2011

The $^{18}F$-FDG is one of the widely used isotopes for PET/CT scans. Dose amount injected to the patient depends on the characteristics of PET/CT systems. Obviously, the technologists who contact with patients would be exposed as well. In this study, we evaluated the exposed dose of the technologist who works on the PET/CT scanner. The exposed dose were measured every month with the TLDs from 6 technologists. Each technologist is shift-worker who manages 3 different PET/CT systems(Scanner 1(S1): 0.15 mCi/kg, Scanner 2(S2): 0.17 mCi/kg, Scanner 3(S3): 0.12 mCi/kg). The average exposed doses of technologists for each PET/CT system were measured as 0.76 mSv for S1, 0.93 mSv for S2 and 0.47 mSv for S3. The maximum dose was 1.12 mSv and minimum was 0.42 mSv. The results showed that there was a correlation between exposed dose and PET/CT system(p<0.005). Less injected dose for patient occurs less exposed dose for technologist. Various studies for the low dose PET/CT system are required for not only the patient but also the technologist.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.511-524
• /
• 2017

This study aims to evaluate the availability of ABM (Active-Based Model), FEATHERS, as a policy evaluation tool. To achieve the goal, scenario analysis on flexible working policy was conducted to measure its impact on activity-travel behavior. As a consequence, there seems no significant change in worker's daily life, other than mitigating traffic congestion due to decreasing commuting travel in the rush hour. The result of VKT (vehicle kilometers traveled) shows an opposite pattern according to given household/individual constraints. The scenario analysis on telecommuting indicates a decreasing trend in both travel frequency and distance because of the diminished number of commuting trips. As the activity space of telecommuters is shifted to a residential area, there are more short-distance trips by using non-motorized transport, which leads to decrease in VKT (using a private vehicle). Thus, the sensitivity of VKT by population groups varies due to transport mode shift (between personal and another mode) and growing non-work trips (using a private mode). This study found few things. First, it is necessary to evaluate the details of policy impact by population groups since it can be varied depending on household/individual characteristics. Second, the case study shows a promising performance of ABM as policy measurement that provides reality in policy evaluation. Third, ABM allows us to do more accurate analysis (i.e. time-series analysis by population groups) of policy assessment than those of FSM (Four-Step Model). Lastly, a further effort in data collection, literature review, and expert survey should be made to enhance the accuracy and confidence of future research.

• Journal of Radiation Protection and Research
• /
• v.38 no.1
• /
• pp.1-9
• /
• 2013

Education and training is an important means of promoting safety culture and enhancing the level of competence of radiation worker in radiation protection. The existing international nuclear education and training of short duration has been carried out on the high-level officials and focussed on the classroom based training. The developing countries has been asking for support to cultivate their own technical experts to Korea which is a donor country exporting nuclear power plants. This paper summarizes the results of developing and operating the international education and training course to froster technical experts in radiation protection that emphasized practical training sessions and technical visits using the excellent domestic radiation facilities and infrastructure of education and training. It mentions the procedures of assessment and feedback as well. In an effort to maximize teaching-learning effects and to maintain consistency of the learning objectives, methods and assessment, SAT methodology has been applied on the processes of developing and operating the course. In the comparative and final assessment which were conducted at the beginning or at the end of training course, participants' average score increased around 2 points. The questionnaire of participants showed a high level of satisfaction of 4.0 points or above for the most of the questions. These imply teaching-learning methods applied to it might be effective. The teaching-learning methodologies may provide the opportunity to develop the customized training course for bringing up international technical experts and to shift educational paradigm from theory-oriented to on-site practice-based education.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5692-5699
• /
• 2011

This study aims to determine potential differences in self-perceived oral health levels between blue-collar and white-collar workers. It is based upon questionnaire survey data dating from Mar. 1 to 30, 2011. All the data collected from 200 blue-collar workers and 100 white-collar worker was analyzed using statistical tools like SPSS ver. 19.0. Self-perceived oral health levels were analysed across three sub-factors - physical, psycho-social, and psychological factors - which were confirmed through factor analysis. The psycho-social factor was statistically significant for age and shift work. Self-perceived oral health levels across the three factors were quantitatively correlated except for psychological factors in blue-collar workers. The study found that occupational group affects workers' self-perceived oral health level. The explanatory power of these 4 variables total 51% in blue-collar group. In case of white-collar group, it was found one variable total 30%. Since oral health levels differ between blue-collar and white-collar workers, oral health promotion projects should differentiate between the two groups, and workers with an interest in their tooth for the prevention, yet negligent act because it will keep your personal oral health care in the prevention-oriented oral health promotion.

• Korean Journal of Labor Studies
• /
• v.19 no.1
• /
• pp.213-260
• /
• 2013

This study pays attention to the restricted use and the possibility of standard position of contingent workers in Brazil. The labor market of Brazil has been developed by formal and informal labor sector, and informal sector includes various precarious workers as well as contingent workers. According to Brazilian Statistics Department, not contingent workers but informal labor focused in this paper have been slowly decreased since year 2000. In this context, this study investigated on the reasons of decreasing contingent employment in Brazil. The results demonstrate that decreased informal employment and instead increased standard workers could not be interpreted by recent the Braizil's economic boom. Along with literature review, the author conducted the case study regarding employment of contingent workers at six large foreign companies in Sao Paulo. The results of this show that the use of contingent employment was prohibited in regular daily works by the labor law and thus firms employed contingent workers in only temporary positions. Further, firms often promise standard positions for contingent workers when temporary employment contract was terminated since there is little or no exist of the differences of wage between standard and contingent worker in terms of 'same work same wage' and 'minimum wage'. In here, labor unions play a key role in employment change from contingent position to standard job. Consequently, decreasing of contingent workers and stepping stone to regular jobs seems to be triggered by both legal regulation on contingent employment and strong unions. This institutional perspective may extend the theoretical view on the use of contingent workers, and the author discuss that Brazil's case could provide practical implications to Korean labor policy.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.2
• /
• pp.77-84
• /
• 2024

In the fourth industrial-revolution era, the construction industry is transitioning from traditional methods to digital processes. This shift has been challenging owing to the industry's employment of diverse processes and extensive human resources, leading to a gradual adoption of digital technologies through trial and error. One critical area of focus is the safety management at construction sites, which is undergoing significant research and efforts towards digitization and automation. Despite these initiatives, recent statistics indicate a persistent occurrence of accidents and fatalities in construction sites. To address this issue, this study utilizes large-scale language-model artificial intelligence to analyze big data from a construction safety-management information network. The findings are integrated into on-site models, which incorporate real-time updates from detailed design models and are enriched with location information and spatial characteristics, for enhanced safety management. This research aims to develop a big-data-driven safety-management platform to bolster facility and worker safety by digitizing construction-site safety data. This platform can help prevent construction accidents and provide effective education for safety practices.