• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.422-428
• /
• 1988

An iterative learning control system is a control system which makes system outputs follow desired outputs by iterating its trials over a finite time interval. In a discrete time system, we proposed one method in which present control inputs can be obtained by a linear combination of the input sequence and time-shifted error sequence at previous trial. In contrast with a continous time learning control system which needs differential opreration of an error signal, the time shift operation of the error sequence is simpler in a computer control system and its effectiveness is shown by a simulation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.550-561
• /
• 2019

Objectives: The purpose of this study is to provide basic data for the improvement of the working environment for health prevention and related countermeasures for shift workers. This study was conducted based on the Fifth Korean Working Conditions Survey (KWCS), which analyzed the health effects of shift work forces and compared them with preceding studies. Methods: By analyzing secondary rates using raw data from the 5th KWCS, 4,870 (9.7%) of the 50,184 total study subjects were divided into shift work and 45,314 (90.3%) non-shift work groups based on the response to shift status. Variables that could affect work health issues were identified and corrected. A cross-analysis was conducted to examine demographic characteristics (gender, age, and education level) of the workers and occupation characteristics (monthly net earnings, employment type, occupation, working period up to now, workplace scale, type of work system, and weekly working hours). In order to find the work health issue ratio between the shift and non-shift work groups, logistic regression was analyzed and the association with health problems according to shift type by gender was looked at through cross-analysis. Results: According to the surveys conducted from the 1st KWCS (2006) to the 5th KWCS (2017), the proportion of shift workers continued to increase. Also, muscular pains in the lower limbs (hips, legs, knees, feet, etc.) (OR=1.135, 95%CI 1.031-1.251), headaches, eyestrain (OR=1.580, 95% CI 1.428-1.748), anxiety (OR=1.715, 95% CI 1.402-2.099), difficulty falling asleep (OR=1.391), and other problems (OR=7.392) were reported. In addition, back pain, muscular pains in shoulders, neck and/or upper limbs, muscular pains in lower limbs (hips, legs, knees, feet, etc.), headaches, eyestrain, depression, anxiety, overall fatigue resulted in significant results for both male and female shift workers. Depression and anxiety were higher in female shift/circulation compared to males. Conclusions: The social nets for the health and safety of shift workers should be explored in a variety of ways, including management and supervision of shift sites, attempts to reorganize and improve the shift system, development of workers' health recovery programs, promotion, systematic treatment, and compensation systems.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.128-129
• /
• 2002

• Journal of the Korea Safety Management & Science
• /
• v.15 no.2
• /
• pp.1-7
• /
• 2013

Based on a literature review regarding shift work, it is recognized that it has an adverse effect on workers' health. Especially, the night shift rather than the day shift imposes severe disorders on workers, which are indicated to dyssomnia, maladaptation to social life, and health problems such as gastroenteric trouble, cardiovascular diseases and depression. As the shift work can be explainable by using workers' labor ability necessarily to maintain company business consistently, it does not consider biorhythm, active mass and health condition of workers Actually duration of shit work would deprive workers of fundamental life rights by causing physical and mental effects. As a result of reviewing previous case studies related to effect of work pattern (day shift and night shift) on workers' health, an incidence of physical diseases like dyssomnia, gastroenteric trouble, cardiovascular diseases and premature delivery was higher in shift workers than normal workers. Additionally the incidence of mental disorders such as busy brain, social isolation, depression and work stress was also higher in shift workers than normal workers. These adverse physical and mental problems were intensified to night shift workers compared to day shift workers. Considering current various reports and study results, it is recommended that the shift work, especially the night work pattern, should not apply to contemporary work situation for sustaining workers' health condition constantly.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.3
• /
• pp.337-345
• /
• 2010

The purpose of this study was to investigate the effects of sleep/wake behavior for shiftwork in air traffic controllers (ATCs) using wrist actigraph for ten workers on a continuous full-day three-team three-shift system of forward rotation including on-duty and off-duty periods. The wrist actigraph data were recorded for three days (one shift cycle) for each subject. The mean activity counts during an on-duty period progressively increased from the night, the swing, to the morning shifts. The doze length during on-duty periods showed decreases in the morning and swing shifts as compared to the night shift. Total sleep time (TST) and sleep efficiency (SE) during off-duty periods increased in the morning-1 and swing-night shift compared to the morning-2 shift. Finally, I discussed the role of doze-taking during the burden on night shift ATCs.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.66-71
• /
• 2011

This article proposes a novel shift automation mechanism for an automated manual transmission (AMT). The development of an automated manual transmission is currently being paid considerable attention by vehicle manufacturers, with the prospects of combining the comfort of an automatic transmission and the high efficiency of a manual transmission. In order to automate the shift mechanism of a manual transmission, the proposed shift automation mechanism consists of two electric motors, cross shaped pinion gears, rack type shift rails, and a ball splined hollow shaft. First we describe the shift mechanism and operating principles of a manual transmission to investigate important design criteria for the shift automation device. And a new shift automation mechanism is described with its structure, elements, and operating principles in detail. Using a conventional manual transmission, we develop a full three-dimensional CAD model of an AMT which includes main components of the manual transmission and the designed shift automation mechanism. Finally we investigate the operating performances and feasibility of the designed AMT by a dynamic analysis.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.4
• /
• pp.566-572
• /
• 2015

Objectives: The major objective of this study was to analyze insomnia after the change to consecutive day shift from day and night shift in a motor assembly factory. Materials: Data were collected at before and after shift system change through a survey conducted by a labor union. We analyzed transition of PSQI(Pittsburgh Sleep Quality Index) among 222 workers by separating the day shift week and night shift week. The cut-off point of insomnia was 8.5 on the PSQI. Results: Mean PSQI in the day shift week significantly did not decrease, going from $6.36{\pm}3.23$ to $6.46{\pm}3.00$(p=0.612 by paired t-test), Mean PSQI for night shift week significantly decreased from $8.31{\pm}3.36$ to $6.19{\pm}3.18$(p<0.001 by paired t-test). However, mean PSQI in the day shift week increased from $6.33{\pm}3.83$ to $7.11{\pm}2.86$ in ${\geq}50$ years(p=0.085, by repeated measured ANOVA). Mean PSQI score in the night shift week improved more in the married group(from $8.38{\pm}3.27$ to $6.12{\pm}3.18$) than in the non-married group(from $7.82{\pm}3.27$ to $6.12{\pm}3.18$)(p=0.038, by repeated measured ANOVA). Conclusions: The change to consecutive day shift improved insomnia in night shift. However, insomnia in the day shift week was worsened among those more than 50 years old.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.30-38
• /
• 1994

In this paper, we propose the parallel scrambling technique which is applicable in the multibit-interleaved multiplexing environment. For this, we introduce the concept of SSRG (simple shift register generator) and MSRG(modular shift register generator), and investigate their properties. We also introduce the concept of PSRG(parallel shift register generator) - parallel form of shift register generator, and consider realizations of PSRGs based on SSRGs and MSRGs. Finally, we show how to apply PSRGs to the parallel scrambling for the SDH system.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.76-82
• /
• 2000

An arc sensor system to compensate positional errors was developed on the foundation of sensor interface system to make use of the on-line shift function of industrial welding robot. Investigating the on-line shift function, we examine the quantitative relationship between the deviation from programmed path and the correction data transferred from personal computer to robot controller. The number of input parameters for weld seam tracking can be reduced by making the relationship between the deviation and the correction data during half weaving be the function of only cross time. With the results of weld seam tracking for the butt joint with V-groove and fillet joint of sheet metal, good performance was implemented. By developing the sensor interface system to compensate the positional errors, industrial welding robot can be expected to contribute to the promotion of welding automation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.266-269
• /
• 1996

This paper describes the rotating shift system managed in Korean nuclear power plants and the retrospective analysis procedure of incidents induced by erroneous actions of plant personnel. It also describes the analysis results which include time distribution of erroneous actions occurred under the rotating shift system.