• 한국의류학회지
• /
• 제5권2호
• /
• pp.21-33
• /
• 1981

The purpose of this study was to develop a skirt pattern drafting method for korean women between the ages of $18\~24$ on the basis of their physical charcteristics which differs from those of other races in its size and figure. The study procedures and results were as follows; 1. Ten types of convantional skirt patterns were collected and compared to determine the essential measuring items for skirt construction, and to discover what problems are involved. 2. Fourteen items of KIST measurement data were analysed for correlation coefficients, to establish representative items and independent ones. 3. Front waist length and back waist length were additionally measured for supplementary data. 4. A new skirt drafting method was developed based on the results of the pattern comparison and the data analysis. 5. A sensory evaluation was applied to evaluate the new method comparing it with the most widely accepted conventional pattern. An original rating scale was developed for the evaluation and an expert panel consisting of five members judged each shell from 12 subjects by random selection. According to a statistical analysis of the result of the 17 items on the rating scale, 14 items showed significant differences (${\alpha}\leqq$0.01 or ${\alpha}\leqq$0.05) between the two, with the new pattern having better fit. The new pattern drafting method proved to be superior to the conventional one especially in the fitness at the back hip, dart length, side seam balance, and the ease for daily activities.

• 환경생물
• /
• 제24권1호
• /
• pp.60-66
• /
• 2006

강굴의 자원조성을 위한 생물학적 기초자료를 얻고자 서식어장별 수온과 염분이 강굴의 성장에 미치는 영향을 조사하였다. 서식어장별 수온 범위는 $3.5\sim26.2^{\circ}C$의 범위로 각 정점간 유의한 차이는 없었다. 염분의 경우 $2.6\sim29.5\;psu$의 범위로서 배알도에서 가장 높은 염분농도를 나타내었으며, 상류지역인 돈탁에서 가장 낮은 염분농도를 나타내었다. 비만도의 경우 다른 지역에 비해 상류지역인 돈탁에서 가장 높았다. 비만도는 모든 정점에서 8월에 가장 낮았다. 그 결과 강굴의 산란기는 $6\sim7$월인 것으로 추정되었다. 각 정점별 각고의 크기를 살펴보면 $149.7{\pm}19.8\;mm$ (배알도), $148.6{\pm}21.3\;mm$ (섬진대교) 그리고 $143.1{\pm}17.6$(돈탁)로 나타났다. 각고에 따른 각장(SL), 각폭(SW), 전중(TW) 그리고 육중(MW)의 상관계수 범위 $(r^2)$는 $0.024\sim0.0471$로 나타났다.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2000년도 춘계수산관련학회 공동학술대회발표요지집
• /
• pp.505-505
• /
• 2000

Perkinsus sp. has been identified as responsible organism for the decrease in Manil clam production along the west and south coast of Korea. Monthly investigation on infection intensity and pathology of Perkinsus infected Manila clam population was carried out in Komsoe Bay located in the west coast during February and December 1999. About one hundred clams were collected each month for the analysis. Infected clams were incubated in fluid thioglycollate media over a week, stained with iodine solution, digested with 2M NaOH and the number of Perkinsus present in an individual recorded. Histological slides were also prepared from infected clams and their pathologic symptoms were examined using a microscope. Trophozoites of Perkinsus sp. were dominantly distributed on gills and epithelia of digestive glands however a few numbers could be detected at siphons and foot tissues. Heavily infected clams often exhibited white spots on mantle and foot tissues due to the inflammatory reaction of the hemocytes, forming nodules. Trophozoites were also found along the connective tissues of follicles during spawning season indicating that Perkinsus sp. may disturb reproduction of the clam. Total number of Perkinsus sp. in an individual clam varied from none to 9, 550, 000 with a monthly mean of 279, 663 to 2, 198, 558 during the course of study. The number of Perkinsus sp. in the clam was found to lowest durin July and August when unusually low salinity was recorded in this area due to the heavy rain. Highest monthly infection intensity in terms of total number of Perkinsus sp. i clam was observed in February, when water temperature recorded as lowest during the study. Small size of clams with shell length of ten mm or less were not infected with Perkinsus sp. It was concluded that Perkinsus infection in Manila clam is in pa controlled by changes in salinity and clam growth; low salinity environment minimize infection intensity while tile clams get more Perkinsus as they grow.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5060-5066
• /
• 2015

구형 LNG 탱크의 제작을 위해서는 탱크의 곡률 반경에 따라 별도의 공장 설비가 필요하며 제작 공간 및 시설 투자의 한계로 인해 조선소에서 다양한 크기의 완전 구형 LNG 탱크를 제작하는 것은 현실적으로 매우 어려운 일이다. 이러한 한계를 극복하고 다양한 용량의 LNG 탱크 제작을 위해서는 기존 구형 탱크의 중앙부에 원통 형태의 확장부를 삽입하여 적재 용량을 키우는 방법이 효과적이다. 본 연구에서는 원통 확장부를 갖는 구형 탱크의 정적 설계하중 산출식을 개발하였다. 본 연구의 결과는 다음 단계에서 개발 예정인 동적 설계하중 산출식과 결합하여 최종적으로 원통 확장부를 갖는 구형 탱크의 간이 해석법을 개발하는데 이용된다. 간이 해석법이 개발되면 많은 시간과 노력이 소요되는 유한요소 해석을 대신하여 초기 견적 시에 정도 높은 물량 계산이 가능하게 된다.

• 한국의류학회지
• /
• 제26권11호
• /
• pp.1582-1592
• /
• 2002

The purpose of this study is to suggest production planning model for women's apparel manufacturer, which are relevant to the situation of Korean clothing industry. The research was based on simulation method. The basic model for the simulation was developed based on the empirical data from six production fm. After verifying the basic model, low alternative production plans went through trial run. In order to suggest the application of these alternative production plans for various style numbers and lot sizes, the simulation results were compared in terms of product efficiency and product cost. The four alternative plans were as follows: 1. The first alternative was to spread out work loads among workers in order to resolve bottlenecks in work flow. So this was suited to manufacturers that had constant production without regard to changing seasons. 2. The second alternative was to merge the skirt and trouser production, which require less work load, in one line. In this line, a few machine was justified by production improvement. It was suited to cases which producted various style suits. The third and fourth alternative were using another subcontractor for assembling inner shell garments. These was compatible in manufacturers which had to product more styles and sizes of trousers and skirts than those of upper garments. 3. The third alternative was to reassign the same workers in production line. Thus, production was increased. 4. The fourth alternative was to except two worker in production line, so expenses of worker's wage was decreased. The four alternatives could be one of the cost effective manufacturing plans according to manufacturer situations.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권3호
• /
• pp.169-177
• /
• 2005

본 연구는 환경 친화적 측면과 자원 재활용 측면에서 경남지역 연안에 다량 방치되고 있는 굴패각을 5.0mm이하의 크기로 분쇄한 후 잔골재 대체재로 사용해서 굴패각 콘크리트의 구조적 특성변화를 연구하여 굴패각 콘크리트의 실용성 제고를 위한 기초자료를 제공하고자 하였다. 이를 위한 기초적인 실험과 주요 변화 요인에 대한 실험을 통하여 굴패각 콘크리트의 시공성과 강도변화에 대해 집중 연구하였다. 실험결과 굴패각을 사용하여도 다른 재료와의 이상반응이나 새로운 물질 형성은 없었으며 이의 강도 또한 일반콘크리트 강도만큼 발현 가능하였다. 그리고 굴패각을 잔골재 대체재로서 우수한 입도크기는 5.0~3.0mm이며 잔골재 대체율의 정도는 약 30%까지 가능한 것으로 판단되었다. 또한 굴패각 콘크리트에서 인장 및 압축강도 상관관계식 ( )을 제시하였다.

• 해양환경안전학회지
• /
• 제14권2호
• /
• pp.105-109
• /
• 2008

우리나라에서 대부분의 호수는 인이 제한영양염인 것으로 나타나고 있다. 그러므로 인의 제거는 하수처리에서 중요한 공정이라고 할 수 있다. 그러나 많은 하수처리장은 재래식처리공정으로 처리하고 있으며 인의 제거율이 $10{\sim}30%$로 낮게 나타나 인의 제거공정은 필요하게 되었으며 패각은 수중의 인을 제거할 수 있는 것으로 알려지고 있어서 인의 활용이 주목된다. 회분식으로 패각을 이용하여 인의 제거율을 조사한 결과 패각의 크기가 작을수록, pH가 높을수록 제거율이 높게 나타났다. 또한 칼슘의 주입농도를 달리하여 처리한 결과 칼슘의 농도가 높을수록 처리효율이 증가하였으며 칼슘의 농도를 20mg/L로 조절하여 실험한 결과 2시간 내에 90% 이상의 제거율을 나타내었다. 재순환을을 변화시켜 실험한 결과 재순환율이 증가할수록 제거율은 증가하였으며 PH 11에서 재순환율을 300%로 조절한 결과 인의 제거율은 80%가 되었다. 중탄신이온의 영향을 평가하기 위하여 중탄산이온의 농도를 달리하여 실험한 결과 중탄산이온의 증가에 따라 인의 제거율은 감소하는 것으로 나타났으며 감소하는 비율은 지수함수로 나타났다.

• 접착 및 계면
• /
• 제16권2호
• /
• pp.76-82
• /
• 2015

SPG 막유화법에 의해 NIPAAm, MBA 및 APS를 용해시킨 수용액을 톨루엔과 미네랄오일의 혼합용액인 연속상에 HMP, Span80과 함께 유화(W/O emulsion)시킨 후, UV광중합법에 의해 PNIPAAm 하이드로젤 입자를 제조하였다. 연속상 내 미네랄 오일의 비율이 증가할수록, PNIPAAm 하이드로젤의 입도와 입자 내 PNIPAAm의 밀도가 증가하였으며, 이에 따라서 VPTT 근처에서 온도 변화에 따른 하이드로젤의 팽윤도($V/V_o$)도 크게 변화하였다. UV 광중합 시 $20^{\circ}C$에서는 속이 꽉찬 형태의 하이드로젤이 제조되었으나 LCST보다 높은 $40^{\circ}C$의 온도에서는 공동입자에서와 같이 하이드로젤의 외벽이 두껍게 형성되었다. 가교제인 MBA의 함량이 증가함에 따라서 가교도 및 입자 내 PNIPAAm의 밀도도 함께 증가하였다.

• 대한조선학회논문집
• /
• 제57권4호
• /
• pp.213-220
• /
• 2020

In the present paper, implosion responses of two adjacent cylindrical tubes under external hydrostatic pressure were experimentally investigated. The cylinder models were fabricated of aluminium alloy 6061-T6 commercial tubes. In the experiment, a pair of two-cylinders were placed inside of a support frame in a medium-size pressure chamber, whose design pressure was 6.0MPa. The distance between the two-cylinders was 30 millimeter measured from outer shell at the mid-length. The implosion tests were performed with water and compressed nitrogen gas as the pressurizing media. The ambient static pressure of the chamber and local dynamic pressure near the two-imploded models were measured simultaneously. It was found that the energy released during an implosion from the first, weaker cylinder triggered the instability of the second, stronger cylinders. In other words, the resulting shock wave of the first implosive impact from the weaker cylinder could cause the premature failure of the neighboring stronger cylinders. The non-contact implosion phenomena from the two-cylindrical tube were clearly observed.

• 건축역사연구
• /
• 제21권5호
• /
• pp.19-32
• /
• 2012

The purpose of this paper is a study on the dome plan of S. M. del Fiore Church of F. Brunelleschi. The results of study are as follows: 1. The planning of floor, elevation and cross section plan of S. M. del Fiore church is basically planned by each other correlation. In particular, the octangular form of geometrical standard which is formed with altar as the center at the crossing part is important component elements which is decided by not only the dome, but form and size of the drum and floor plan form of the lantern 2. The dome which has been planned by F. Brunelleshi has completed the new dome, preserving gothic thought intended by the church plan after study on architecture of ancient Rome with Pantheon. And the dome which is a main space of church through all aspects of plan, structure, function and construction about the dome is a opportunity in the beginning of Renaissance architecture which is a new epoch and a turning point of architecture on various point of view. 3. The dome which is constructed by F. Brunelleshi has been planned through the innovative solution by the refusal of traditional semicircle form dome, centering use and creation double-shell structure form for the first time in history. And the construction of dome has been solved with the invention of various construction equipments and machineries, the stone rib planned for connection and reinforcement about shells of the octangular form, the support method for reduction the gravity of bricklayers work and the brick work of nock-patterned shape which is masonry construction method of the architecture of ancient Rome.