• Journal of Aquaculture
• /
• v.14 no.3
• /
• pp.181-195
• /
• 2001

To stabilize the lantern cage culture system of Patinopecten yessoensis(Jay) in the eastern coast of Korean peninsula, optimum conditions such as time of transplantation, rearing density and depth, and time of harvest were identified. During the period from January 1991 to December 1998, the water temperature ranged from 4.7 to 21.4$^{\circ}C$ at 15-30 m depth and 4.9 to 25.7$^{\circ}C$ at the surface; these thermal ranges were within the optimal ranges (5-23$^{\circ}C$) prevailing at 15-30 m depth at surface water. Annual thermal changes indicated that the prevailing temperature during the years 1993 and 1996 was near optimum, but higher during the years 1994, 1997 and 1998, when mass mortality and growth retardation occurred. Salinity (32.0- 34.4$\textperthousand$) and dissolved oxygen (4.14 -8.11 $\mu\textrm{g}$/l) at 15 m depth were well within the optimum ranges. The chlorophyll concentrations (0.06 - 2.73$\mu\textrm{g}$/l) indicated that the study area was oligotrophic, although mass mortality did occur, when chlorophyll concentrations were high, especially in summer. Hence water temperatures and chlorophyll concentration are major factors related to survival and growth of the scallop. In terms of the shell height maximum growth occurred during spring (March-May; 8 - l3$^{\circ}C$) and fall (October-December; 11-l7$^{\circ}C$) in the lantern cage culture. Slow growth was recorded during late winter January-february; less than 7$^{\circ}C$) and mid-summer (August- September; more than 18$^{\circ}C$). Daily growth of shell height and total weight were 0.02∼0.24 mm and -0.07∼0.90 g at the rearing density of 12 individuals per net. Optimal .earing density in the lantern cage (ø50${\times}$20 cm) was 10∼15 individuals with the shell height of 5∼6 cm. The fastest growth rates were observed at 15∼20 m depth; however, it is recommended that 20∼30 m would be optimal. The scallops require 22 months to attain the commercial size of 10 cm shell height and 140 g total weigh, and are best harvested and sold during March-April.

• Journal of Korean Society of Forest Science
• /
• v.96 no.4
• /
• pp.455-461
• /
• 2007

This research was processed on morphological and physical characteristics of 'Yongdong' cultivar nuts. (1)Morphological properties of 'Yongdong' cultivar nuts were significantly different from the control, native species, in respect of all properties. (2) 'Yongdong' cultivar nuts showed higher figures than the native species on 9 items of morphological properties (kernel weight, size, length and width of pad on suture and etc.), whereas other 6 items (height of pad on suture, thickness of shell and septem, fragment numbers of isolated kernel, roundness index, and etc.) showed lower figures than those of the control. (3) In physical properties of the nut shells, 'Yongdong' cultivar was superior to the control at all items with the exception of compressive prove distance. Accordingly, it was also verified as effective cultivar of shelled walnut with suture line direction applied the minimum strength. (4) 'Yongdong' cultivar, 21.9 kg, was approximately twice lower than the control, 42.6 kg, on maximum compressive weight. It was demonstrated that the 'Yongdong' cultivar characterized by easily crushing shell by small strength was great in cracking properties. (5) On the study of yield strength, the native species being twice higher than 'Yongdong' cultivar showed the properties of the small elasticity and the shell hardness. While, the suture line of 'Yongdong' cultivar having the lowest yield strength 15.6 kg and 16.0 kg was identified the shell crushed easily. (6) The movement distance of the compressive prove of 'Yongdong' cultivar, 4.2 mm, was longer than that of the control, 2.7 mm. Subsequently, it means that the amount of loss possibly occurring to distribution process was not great, whereby productive value was high. (7) The compressive strength of the suture line of 'Yongdong' cultivar, $9.1kg/cm^2$, was much lower than total average of that $12.4kg/cm^2$. It was also statistically different with other properties. (8)The hardness examination by the compressive position revealed that the suture line of 'Yongdong' cultivar, $149.8kg/cm^2$, was lowest in contrast with the control, $300.9kg/cm^2$.

• Journal of Animal Environmental Science
• /
• v.13 no.3
• /
• pp.211-218
• /
• 2007

This study was carried out to develop the technique for manufacturing activated carbon from livestock manure and to analyse it's odor absorptiveness. Each of layer manure(LM), litter from broiler house(BL) and litter from dairy barn(DL), compost from layer manure(LC) and pig manure(PC), and coconut shell(CS) was used as a raw material. Activated carbon by grinding the raw material, adding the coal tar as a binder, palletizing, drying, heating with $N_2$ gas at $400^{\circ}C$ for 1 hour, activating by reaction with steam at a temperature of $750^{\circ}C$ for 1 hour. Moisture contents of raw material was 44.9% in layer compost, 71.9% in layer manure, 24.4% in broiler litter, 47% in pig manure compost and 33.9% in dairy litter. Volatile matter in layer compost, layer manure, broiler litter, pig manure compost and dairy litter was 18.8%, 31.0%, 49.8%, 22.3% and 11.6%, respectively. Surface area(BET) of activated carbon from layer compost, layer manure, broiler litter, pig manure compost, dairy litter and coconut shell was 259.8, 209.8, 63.5, 442.3, 812.9 and $1,040\;m^2/g$, respectively. Activated carbon made by livestock manure or litter were examined with scanning electron microscope, and micropore was a type of sponge like particles honeycombed with chambers. Pore size of activated carbon was ranged from 0.39 to $5.02\;{\AA}$, but coconut shell was $0.30\;{\AA}$. Iodine absorptiveness of activated carbon from livestock manure was $530{\sim}580mg/g$. But activated carbon made by coconut shell was 1000 mg/g. Each activated carbon could absorb odor compound very well. Absorptiveness of activated carbon from layer manure for hydrogen sulfide and trimethyl amino was 74.5% and 73.9% at the accumulated flux of 60,000 ml, but, in the case of ammonia was only 15.2% at the accumulated flux of 10,000 ml

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.215-225
• /
• 2015

Recently, the importance of energy saving and alternative energy is significantly increasing due to energy depletion and the phase change material (PCM) research for saving energy is also actively investigating. In this research, the membrane emulsification using SPG membrane was used to make various microencapsulated phase change material (MPCM) particles which were comprised of $Rubitherms^{(R)}$ (RT-21 and RT-24) core and silica coating. We investigated the pressure of the dispersion phase, the concentration of surfactant, and the ratio of $Rubitherm^{(R)}$ and silica to prepare various MPCM particles. The DSC and TGA were used to examine the heat stability and latent heat properties. Also, PSA, SEM, and optical microscopy were used to confirm the size of $Rubitherm^{(R)}$ particles and the thickness of silica shell. The average of particle size was $7-8{\mu}m$. And, FT-IR was also used to enforce the qualitative analysis. Finally, the MPCM particles obtained from membrane emulsification showed monodispersed size distribution and the heat stability and latent heat were kept up to 80% compared to pure $Rubitherm^{(R)}$. So, it can be effectively used for wallpaper, buildings and interior products for energy saving as PCMs.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.4
• /
• pp.61-70
• /
• 1986

In accordance with a rapid growth of demani on aquatic animals, researches of the unused fishery resources On the deep sea b~d in the Korean Waters has been and will be required. The authors carried out a series of fishing experiments to investigate the available resources and to find the effective fishing method on the deep sea bed of the Korean East Sea. In the experiments, 19 kinds of traps which are different from each other in shape, mesh size and entrance diameter were used. The fishing experiments w~r;; carried out in four areas of 20Dm, 600.'11, 800m and 1000.'11 deep respectively, by the Pusan 402 (30:) GT) and the Pusan 403 (279GT), the training ships of National Fisheries University of Pusan, during August, 1986. The catc~ were analyzed with the size, the depth and the construction of traps. The results obtained can be summarized as follows: 1. Main species of the catch w~re pink shrimp, Pandalus bolelis, a kind of welks, Buccimum striatissimum and a kind of larg~ crabs. Chiono8cetes japonicus and the another species were few. 2. The CPUE value (expressed by the number of catch per trap in this paper) of pink shrimp was the highest in the depth of 20J-n around, and the value in the depth of 600.'11 or more decreased gradually with an increase of the depth. But, the value of Buccimum straitissimum was much higher in the depth of 6:J:)!1I or more than that in the depth of 200m around. On the other hand, the value of Chion:Jecetes japonjcus was very low in general. 3. The iniividual body size of the catch differed with the depth. Pink shrimps caught in the depth of 200m around were smaller than those in the depth of 600.'11 or more. In contrast with this, Baccimum striatissim:t.m caught in the depth of 200m around were larger than those in the depth of 600.'11 or more. 4. Depending on the selection curve in Ishida's method for the mesh size of trap webbing, the carapace length of pink shrimp and the shell length of Buccimum striatissimum which are equivalent to 100% relative catching efficiency can be estimated about 3.5cm and 6.5cm or so respectively. 5. The number of catch of pink shrimp and Buccimum striatissimum by the 60.'1'1.'11 entrance diameter of trap were less than that by the 90mm, 120mm and 150mm, even thogh the diffierence am~r, g 9:Jmm, 120.'11.'11 and 150:1'.'11 are not so large.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.61-67
• /
• 2008

This study was conducted to evaluate filtering rate (FR) and pseudofeces production (PFP) of a freshwater filter-feeding bivalve, Unio douglasiae, on a toxic cyanobacterium (Microcystis aeruginosa). The experiments were conducted under the various conditions of water temperature $(5{\sim}35^{\circ}C)$, mussel size $(5.6{\sim}13.3cm)$ and food con centrations $(49{\sim}491{\mu}g\;Chl-{\alpha}L^{-1})$. Among the applied temperature, the maximum FR $(0.41L\;gAFDW^{-1}hr^{-1})$ and PFP (0.47mg $gAFDW^{-1}hr^{-1}$) were observed at 15 and $25^{\circ}C$, respectively. Both weight-based FR and PFP were not correlated with the mussel size, and the values lied in a limited range with some degree of variation. Likewise, no significant relations between FR and PFP was observed in the mussel size. The FR values were negatively correlated with food concentration, while PFP showed positive correlation. Among the applied food concentrations, the maximum FR (0.34L $gAFDW^{-1}hr^{-1}$) and PFP (0.06mg $gAFDW^{-1}hr^{-1}$) appeared in $113{\mu}g\;Chl-{\alpha}L^{-1}$ and $491{\mu}g\;Chl-{\alpha}L^{-1}$, respectively. These results indicate that the grazing of Unio douglasiae are affected by various parameters, and it may be applied as an effective biofilter to inhibit Microcystis bloom under appropriate application. However, further studies on the fate of excreted pseudofeces are needed to understand their possibility of stimulating nuisant algal growth.

• The Korean Journal of Malacology
• /
• v.16 no.1_2
• /
• pp.31-34
• /
• 2000

A series of rearing experiments have been conducted to determine the growth and survival rate in accordance with body size in closed recirculating sea water system. The abalone, Sulculus aquatilis, spat of 10.24${\pm}$0.85 mm, 0.36${\pm}$0.l g and 24.9${\pm}$1.07 mm 2.07${\pm}$0.57 g in shell length and body weight were used in this study Ranges of water temperature and pH during the rearing period of 90 days were 10.0-24.2$^{\circ}C$ and 7.8-8.2, respectively. Dissolved oxygen during the experiment period was 6.13-7.21 ml/l and inorganic nitrate was 0.68-3.72 $\mu\textrm{m}$ in NH$_4$$\^$+/-N, 0.17-7.79 fm in NO$_2$-N and 0.4-11.52 $\mu\textrm{m}$ in NO $_2$-N, Growth in shell length and body weight of the spat in large group and small group at the end of the experiment were 30.80${\pm}$3.14 mm, 17.98${\pm}$2.61 mm and 3.20${\pm}$0.8 g, 0.36${\pm}$0.1 g, and survival rate of spat in large group and small group at the end of the rearing experiment were 96.0% and 90.0% , respectively.

• Applied Microscopy
• /
• v.39 no.4
• /
• pp.341-348
• /
• 2009

The crystal structure of nano-crystalline, $BaTiO_3$, with the average particle size of 100 nm was investigated using electron diffraction techniques. We characterized the precession electron diffraction system and then carried out the structure determination using precession electron diffraction and conventional selected area electron diffraction. As a result, it was revealed that $BaTiO_3$ nano-crystalline exist as a mixture of tetragonal structure and cubic structure by precession electron diffraction technique. In addition, it could be turned out that $BaTiO_3$ nano-crystalline is a core-shell structure consisted of a tetragonal phased core and a cubic phased surface layer by theoretical calculation. The thickness of the cubic surface layer was approximately 8.5 nm and the lattice parameters of cubic and tetragonal phases were a=3.999${\AA}$ and a=3.999${\AA}$, c=4.022${\AA}$, respectively. Finally, it is expected that precession electron diffraction is more useful technique for structure determination of complicated nano-crystalline materials because of its higher spatial resolution and minimization of dynamical scattering effect.

• Clean Technology
• /
• v.23 no.1
• /
• pp.73-79
• /
• 2017

Recently usage of biomass is increased in pulverized coal power plants for reduction of $CO_2$ emission. Many problems arise when thermal share of the biomass is increased, and milling of the biomasses is one of the most important problems due to their low grindability when existing coal pulverizer is used. Grindability of coal can be measured through the HGI (Hardgrove grindability index) equipment as a standard, but method of measuring biomass grindability has not been established yet. In this study, grinding experiment of coal and biomass was performed using a lab-scale ball mill. One type of coal (Adaro coal) and six biomasses (wood pellet (WP), empty fruit bunch (EFB), palm kernel shell (PKS), walnut shell (WS), torrefied wood chip (TBC) and torrefied wood pellet (TWP)) were used in the experiment. Particle size distributions of the fuels were measured after being milled in various pulverization times. Pulverization characteristics were evaluated by portion of particles under the diameter of $75{\mu}m$. As a result, about 70% of the TBC and TWP were observed to be pulverized to sizes of under $75{\mu}m$, which implies that they can be used as alternative biomass fuels without modification of the existing mill. Other biomass was observed to have low grindability compared with torrefied biomass. Power consumption of the mill for various fuels was measured as well, and the results show that lower power was consumed for torrefied biomasses. This result can be used for characterization of biomass as an alternative fuel for pulverized coal power plants.

• Journal of Aquaculture
• /
• v.7 no.2
• /
• pp.77-87
• /
• 1994

The study was conducted to develop the suitable abalone's diets for the indoor tank culture. The young abalone Haliotis discus hannai Ino sized ca. 20, 30 and 40 nun in shell length were fed three different diets, dried sea mustard Undaria pinnatifida HARVEY (control), artificial diet and terrestrial plants e. g. Chinese cabbage and Perilla leaf for 2 years. The growth rate of abalones fed an artificial diet was slightly higher than that of abalones from the control. However, the growth rate of abalones from terrestrial plants was significantly lower than that of abalones fed a control or an artificial diet (P< 0.05). The daily feeding rate of young abalones from terrestrial plants was slightly higher than that of abalones from the control. While, that of abalones from an artificial diet was approximately $30\%$ of that of abalones from a control or a terrestrial plants diet. The feed efficiency of abalone from artificail diet was higher than that of abalones from a control or a terrestrial plants diet, and the smaller size of young abalone showed the higher the feed efficiency. The EFA index values ${{\sum}n9/(20:4n6+20:5n3+22:6n3}$ of the dried sea mustard and the artificial diet were 1.26 and 3.64, respectively. These values were favorable, but the value of terrestrial plant, Perilla leaf was 127.00 indicating poor EFA index for normal growth of abalone.