• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.274-277
• /
• 2003

The purpose of this study is preparing the database for conventional spinning of the steel sheets which are applied into the mechanical parts such as wheel disc and driving clutch drums. The experimental work for the conventional spinning of cylindrical typed shell has been carried out and the database for limiting spinning ratios, suing-back and thickness distributions has been obtained. The working conditions are categorized for the feeding velocity and dimension of rotating mandrel and forming roller. The results are useful to the product design of conical parts. And the present study can contribute to the improvement of industrial technology.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1364-1367
• /
• 1996

Recently, direct rolling process, called as strip casting process, has been interested in to save production cost by reducing forming processes. In direct rolling process, since a steel strip of thickness 1-5(mm) can be produced directly from molten metal, it can eliminate secondary hot rolling process. On the other hand, since many process variables are existed in this process and relation of these variables is very complex, it is difficult to realize the process design and the quality control. In this paper, as first step to overcome above difficulties, the quantitative relationship of the process variables affected to quality of the strip has been carried out through the numerical analysis. Also, we determined the process variable to monitor the quality in the direct rolling process. As a result, we show that the solidification final point, called as Nip point, was related directly to quality of the strip.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.28-31
• /
• 1998

Wrinkling is one of the major defects in sheet metal products and may be also attributable to the wear of the tool. The initiation and growth of the wrinkles are influenced by many factors such as stress state, mechanical properites of the sheet material, geometry of the body, and contact condition. It is difficult to analyze the wrinkling initiation and growth considering the factors because the effects of the factors are very complex and the wrinkling behavior may show wide variation for small deviation of the factors. In this study, the bifurcation theory is introduced for the finite element analysis of wrinkling initiation and growth, All the above mentioned factors are conveniently considered by finite element method. The finite element formulation is based on the incremental deformation theory and elastic-plastic material modeling. The finite element analysis is carried out using the continuum-based resultant shell elements considering the planar anisotropy of the sheet metal. The proposed method is verified by employing to column buckling problem. And then, the initiation and growth of wrinkling in deep drawing of cylindrical cup are analyzed.

• 소성∙가공
• /
• 제7권6호
• /
• pp.594-602
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points. the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurments and PAM-STAMP results.

• Mycobiology
• /
• 제36권3호
• /
• pp.193-194
• /
• 2008

Cladonia peziziformis (With.) J.R. Laundon was collected from Baega mountain, Jeonnam Province, Korea in 2008. It is characterized by short and slender podetia with verruculose surface, split along the sides. Apothecia large, pale brown, always growing on the top of the podetia. Primary squamules shell-like, thick, and convex. Fumarprotocetraric acid contained in thallus. This is the first record of this species in Korea.

• 센서학회지
• /
• 제27권5호
• /
• pp.345-351
• /
• 2018

We employed an unprecedented technique to synthesize porous $WO_3@SnO_2$ nanofibers exhibiting core-shell and fiber-in-tube configurations. Firstly, 2-methylimidazole was uniformly incorporated in as-spun nanofibers containing ammonium metatungstate hydrate and the sacrificial polymer (polyacrylonitrile). Secondly, the 2-methylimidazole on the surfaces of nanofibers was complexed with tin(II) chloride ($SnCl_2$) via simple impregnation of the as-spun nanofibers in ethanol containing tin(II) chloride dihydrate ($SnCl_2{\cdot}2H_2O$). The presence of vacant p-orbitals in tin (Sn) and the nucleophilic nitrogen on the imidazole ring allowed for the reaction between $SnCl_2$ and 2-methylimidazole, forming adducts on the surfaces of the as-spun nanofibers. The calcination of these nanofibers resulted in porous $WO_3@SnO_2$ nanofibers with a higher surface area ($55.3m^2{\cdot}g^{-1}$) and a better response to 1-5 ppm of acetone than pristine $SnO_2$ NFs synthesized using a similar method. An improved response to acetone was achieved upon functionalization of the $WO_3@SnO_2$ nanofibers with catalytic palladium nanoparticles. This work demonstrates the potential application of $WO_3@SnO_2$ nanofibers as sensing layers for chemiresistive sensory devices for the detection of acetone in exhaled breath.

• 한국식품영양학회지
• /
• 제16권2호
• /
• pp.130-137
• /
• 2003

The squid had not been utilized for gel products because of its lower gel forming ability. The objectives of this study were as followed; 1) the optimum heating condition on squid meat paste products and 2) the optimum added level for jelly strength of squid meat paste products. Optimum heating conditions of squid meat kamaboko were as followed; setting(pre-heating) at 15$^{\circ}C$ or 55$^{\circ}C$ for 2 hours and heating at 9$0^{\circ}C$ for 60 minutes. The additives examined were as follows; 20mM EDTA, 10mM PMSF, 5 $\mu$mol/100g TGase, 0.2% potassium bromate, 2% collagen, 2% sucrose ester of stearic acid and 1% egg shell powder. The effects of additives on jelly strength were observed as follow, in descending order; 10mM of PMSF>5 $\mu$mo1/100g of TGase>0.2% of potassium bromate>20mM of EDTA. But sucrose ester of stearic acid and 1% egg shell powder were no effect. The solvents examined were as follows; n-amyl alcohol, n-butyl alcohol, n-hexyl alcohol, ethyl alcohol, ethylene glycol, propylene glycol and glycerin glycol. It showed that high jelly strength as 787gㆍcm for 3% of n-butyl alcohol and 749gㆍcm for 3% of n-amyl alcohol. To adding 5% of n-butyl alcohol and n-amyl alcohol, gave the highest jelly strength and water holding capacity(WHC). Effect of alcohol on jelly strength appeared higher value at added 5% of n-butyl alcohol than n-amyl alcohol, and flying squid product was higher than jumbo squid product.

• 한국식품영양학회지
• /
• 제14권6호
• /
• pp.579-584
• /
• 2001

Chitosna을 Bacillus pumilus BN-262 유래의 chitosanase로 처리하여 trimer, tetramer, pentamer가 전체 올리고당 중 64.3%에 달하는 비교적 저분자의 chitooligosaccharides로 구성된 LMW-chitooligosaccha-rides를 얻었으며, chitosan을 Trichoderma viride 유래의 cellulase로 처리하여 중합도7이상의 것이 전체 올리고당 중 49.3%에 달하는 상대적으로 분자량이 큰 chitooligosaccharides로 구성된 HMW-chitooligosac-charides를 얻었다. 제조된 chitooligosaccharides의 항균성과 콜로니 형성 저해 활성을 측정하였다. LMW chitooligosaccharides의 Bacillus cereus, Bacillus subtilis, Candida albicans, Escherichia coli, Escherichia coli O157:H7, Lactobacillus plantarum, Listeria mo-nocytogenes, Pseudomonas aeruginosa, Salmonella enteritidis, Salmonella typhimurium, Staphylococcus aureus, Streptococcus mutans에 대한 MIC(최소저해농도)는 각각 1.5%, 1.5%, above 2.0%, 1.5%, 1.5%, below 0.5%, 2.0%, 1.5%, above 2.0%. 1.0%, 1.5%, 1.0%였으며, HMW-chitooligosaccharides의 Bacillus cereus, Bacillus subtilis, Candida albicans, Esche-richia coli, Escherichia coli O157 : H7, Lactobacillus plantarum, Listeria monocytogenes, Pseudomonas aeruginosa, Salmonella enteritidis, Samlmonella typhimurium, Staphylococcus aureus, Streptococcus mutans에 대한 MIC는 각각 1.0%, 1.0%, 2.0% 이상, 1.0%, 1.0%, 0.25% 이하, 1.0%, 1.0%, 2.0%, 1.0%, 1.0%, 0.5%였다.

• 반도체디스플레이기술학회지
• /
• 제3권3호
• /
• pp.1-4
• /
• 2004

Fabrication and electrical and mechanical properties of piezoelectric micro bending actuators (PMBA) using sol-gel-multi-coated thick PZT films and MEMS processes were investigated. PMBA could be used for design and fabrication of micro fluidic devices, for example, micro-pumps, micro dispensers, and so on. PMBA were fabricated using 2 um thick PZT films on Pt (350 nm)/$SiO_2$ (500 nm)/Si ($300\mu\textrm{m}$) substrates and MEMS processes. 7 types of PMBA were fabricated with areas of silicon diaphragms, PZT films and top electrodes. When the sizes of silicon diaphragms, PZT films and Pt top electrodes were reduced from 3000$\times$$1389\mu\textrm{m}$, 4000$\times$$1000\mu\textrm{m}$ and 4000$\times$$900\mu\textrm{m}$ down to 14%, 14% and 11 % of them, respectively, the center displacements of PMBA were decreased from 0.68 um to 0.10 um at 5 Hz and 12 Vpp. So, PMBA with large areas showed larger displacements than PMBA with small areas and experimental results were also good agreement with the plate and shell theory.

• 한국의류학회지
• /
• 제32권12호
• /
• pp.1825-1836
• /
• 2008

3차원 인체 형상에 적합한 의복 패턴을 제작하기 위하여 인체 형상을 평면전개하여 체표패턴을 얻기 위한 다양한 연구들이 진행되고 있다. 본 연구는 Grid method를 이용한 여성 상반신 앞면의 평면전개를 위하여 최적 그리드 기준을 결정하는 것을 목적으로 하였다. Grid method는 인체 형상의 표면에 커브를 생성하고 각 커브의 길이를 플로팅하는 원리에 의하여 3차원 형상을 평면전개 방법이다. 첫째, Young 모델과 Adult 모델에 해당하는 두 개의 3차원 바디들을 사이즈코리아데이타에 기초하여 모델링하였다. 둘째, 각각의 모델을 3차원 특징점에 의하여 shell과 block으로 세분화하였다. 셋째, 각각의 block은 다양한 그리드수의 조합에 의하여 평면전개되었다. 마지막으로, 가장 효율적인 조합을 선정하여 평면전개의 기준으로 제시하였다.