• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2003년도 추계학술발표대회 논문요약집
• /
• pp.73-73
• /
• 2003

This study was carried out to evaluate the utilization of fermented skipjack tuna viscera (FSTV) in the diet for juvenile abalone Haliotis discus hannai. Lactobacillus bulgaricus was used for fermentation of skipjack tuna viscera. Eight isonitrogenous (about 30% crude protein) diets were formulated to include different levels (0%, 10%, 20% and 30%) of FSTV as a replacer of either dietary fish meal or soybean meal. Three replicate groups of abalone were fed the experimental diets containing different levels of FSTV for 7 weeks. The inclusion of FSTV up to 30% in fish meal-based diet had no significant effect on survival, body weight, shell growth, and proximate composition of abalone (P>0.05). Weight gain of abalone fed the diet substituting 10% FSTV for soybean meal was not significantly different to that of abalone fed the control diet, however this value decreased in abalone fed the 20% and 30% FSTV (P<0.05).The contents of crude protein and lipid of soft body in abalone fed soybean meal-based diets were significantly affected by dietary FSTV level (P<0.05). The results of this study indicate that FSTV can be used as a partial substitute protein source for fish meal or soybean meal in the formulated diet for juvenile abalone.

• 한국잠사곤충학회지
• /
• 제38권2호
• /
• pp.124-129
• /
• 1996

4령과 5령 누에에 1%, 3%, 5%의 dimethyl sulfoxide를 침식시키면 누에의 실용형질인 잠체중, 견사선 무게, 암·수 견중 및 견충중과 산란량이 현저히 증가했다. 그러나 경과일수, 족중생존율과 부화율은 대조와 큰 차이를 보이지 않았다. 한편 dimethyl sulfoxide 1.3%구에서는 누에의 혈액내 단백질과 트리할로스량을 제외하고는 차이가 없었다.

• 한국동물학회지
• /
• 제11권1호
• /
• pp.1-4
• /
• 1968

1. Lamprotula coreana 가 棲息하는 現地에서는 體長 2-4cm 되는 피라미의 稚魚에서 만 本種의 幼生이 附着하고 있는 것을 觀察할 수 있었다. 2. 本種의 幼生의 魚體附着은 4月初에 이루어짐을 알았다. 3. 피라미의 個體當 幼生附着數는 1.6이었다. 4. 附着된 幼生은 4月末에서 5月初에 걸쳐서 完全히 脫落되었다. 5. 放出된 幼生은 大部分이 지느러미에 附着디며 少數는 눈, 코, 입, 아가미 等에도 附着한다는 事實을 밝혔다. 6. 幼生이 가장 많이 붙는 部位눈 魚體의 꼬리지느러미이었고 다음이 가슴지느러미이었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.402-403
• /
• 2003

Garment manufacture represents the final stage of processing a finished fabric. The main task of the garment manufacturer is to produce shell structures out of flat fabrics to match the shape of the human body, and the most acceptable means of joining textile materials for apparel use is by sewing. On the sewing process, the bottom layer is pushed forward by the feed-dog, but the presser foot tends to retard the passage of the top layer. Since the friction between the layers is low, is possible that the components will move out of phase and pucker. (omitted)

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 1997년도 국제 심포지움 및 춘계 학술대회
• /
• pp.20-27
• /
• 1997

Chinin is the second most plentiful natural polymer. Currently, chitin and chitosan are manufactured commercially in large scale from crab and shrimp shell as fish processing waste. They is being used in many commercial application because of their various functional properties. Chitosan, in particular, is being evaluated as biomedical materials in a number of food and pharmaceutical industries. Despite their potential abilities, the perfect safety had been demonstrated until now. However, the long-term feeding with chitin was not any negative effect the body weights and serum enzymatic activities in mice. And, in rats supplied with $5\%$ of chitosan diet for 450 days, there was no changes of Ca concentration in blood, bone and other organs except for in muscle. Consequently, there was no direct toxicity of chitin and chitosan against some animals such as rat and mouse by recently reports.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.143-150
• /
• 2005

In this study, to evaluate the collision behaviors of the navigating vessel and the dolphin protective system protecting the substructures of bridges, the numerical simulation was performed. The analysis model of vessel bow that the plastic deformations are concentrated was composed by shell elements, and the main body of vessel was modeled by beam elements to represent the mass distribution and the change of potential energy. The material model reflecting the confining condition was used for the modeling of the filling soil of dolphin system. The surrounding soil of the dolphin system was modeled as nonlinear springs. As results, it is verified that the dolphin system can adequately dissipate the kinematic energy of the collision vessel. The surrounding soil of the dolphin system is able to resist the collision force of the vessel. And the major energy dissipation mechanism of collision energy is the plastic deformation of the vessel bow and the dolphin system.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1165-1169
• /
• 2007

In this study, a novel sensor system for measuring the temperature inside an oral cavity is proposed. With this aim, a small size of thermistor was used for resolving the cavity's temperature with the resolution of $0.1^{\circ}C$. To evaluate effectiveness of our sensor system, the temperature and its output voltage characteristic, and the specifications of response are investigated. It turned out to be that our sensor system has a linear property in terms of temperature variations for a healthy subject's body temperature range and has a good response time within 3 seconds. Also, in order to investigate the medical application, our sensor system is sought to measure the real temperature variations of a subject's oral cavity and ark shell especially for 'before' and 'after' exercise mode.

• 대한기계학회논문집A
• /
• 제30권1호
• /
• pp.76-83
• /
• 2006

This paper addresses the method for the shape design sensitivity analysis of the buckling load in the continuous elastic body. The sensitivity formula for critical load is analytically derived and expressed in terms of shape variation, based on the continuum formulation of the stability problem. Though the buckling problem is more efficiently solved by the structural elements such as beam and shell, the elastic solids are considered in this paper because the solid elements can be used in general for any kind of structures whether they are thick or thin. The initial stress and buckling analysis is carried out by the commercial analysis code ANSYS. The sensitivity is computed by using the mathematical package MATLAB using the results of ANSYS. Several problems including straight and curved beams under compressive load, ring under pressure load, thin-walled section and bottle shaped column are chosen to illustrate the efficiency of the presented method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1360-1365
• /
• 2007

A linear compressor used in a refrigerator has higher energy efficiency than other compressors. On the other hand, its vibration level has still been much severe. Changing the characteristics of connecting parts may reduce the vibration level of linear compressor. The piston, body and shell are assumed to be rigid. These rigid bodies are connected by coil springs and flexible loop pipe. This paper derived the mathematical model by combining the equation of motion of rigid parts and flexible parts. The variation of vibration level according to the change of connecting parts was investigated.

• 한국가금학회지
• /
• 제26권1호
• /
• pp.27-33
• /
• 1999

The distribution of oviductal vessels of eight Korean native pheasants was observed after Latex casts of vessels. Latex was injected into thoracic aorta and posterior vena cava of these birds for cast preparation. The results were as follows: 1. The arteries suppling oviduct of the Korean native pheasants contained A. oviductalis cranialis, media, caudalis and vaginalis. The veins drainaging oviduct were stretched along the following ateries and all of the oviductal vessels were situated on the left side of the body. 2. The anterior oviductal artery arose from the pubic artery of the left external iliac artery and distributed to the infundibulum and the magnum of the oviduct. 3. The middle oviductal artery arose from the left sciatic artery and distributed to the isthmus and shell gland of the oviduct. 4. The caudal artery arose from the left internal pudendal artery of the median sacral artery and distributed to the caudal part of uterus and the cranial part of vagina. 5. The vaginal artery arose from the left internal pudendal artery of median sacral artery and distributed to the caudal part of vagina.