• Journal of Environmental Science International
• /
• v.23 no.1
• /
• pp.153-156
• /
• 2014

This study was conducted to evaluate the effects of sea urchin shell powder on nitrogen characteristics in poultry litter by assigning ninety 1-d-old male broiler chicks (Arbor Acres) to one of 3 treatments (control, 1% sea urchin shell powder, and 1% feed additives) in 3 replicates of 10 birds each. For all treatments, the overall dry matter contents were decreased (P < 0.05) as time increased, except for at 1 week. When compared with controls, the dietary sea urchin shell powder and feed additives for 0 and 3 weeks did influence their TN contents, but not for 1, 2 and 4 weeks. The treatments with sea urchin shell powder and feed additives had a significant (P < 0.05) influence on $NH_3$-N in poultry litter compared with controls. However, at 4 weeks, no marked differences were observed in $NH_3$-N contents among treatments. Treatments with 1% sea urchin shell powder might enhance the value of poultry litter as N fertilizer.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.3
• /
• pp.77-85
• /
• 2020

In this study, we proposed a method to replace the solid finite element model of the boiler membrane wall for coal-fired power plants using an equivalent shell model. The application of a bending load to the membrane wall creates greater displacement at both ends of the central portion when compared with the middle when an isotropic elastic constant is used in the shell model. This is inconsistent with the results of the solid model where the central portion is uniformly deformed. Here, we presented a method to determine the orthotropic elastic constants of the shell model in terms of bending stiffness and vibration characteristics to solve this problem. Our analysis of the orthotropic shell model showed that the error ratio was 0.9% for the maximum displacement due to the bending load, 0.3% for the first natural frequency, and 2.5% for the second natural frequency when compared with the solid model. In conclusion, a complicated boiler membrane wall composed of a large number of pipes and fins can be replaced with a simple shell model that shows equivalent bending stiffness and vibration characteristics using our proposed method.

• Structural Engineering and Mechanics
• /
• v.44 no.6
• /
• pp.753-762
• /
• 2012

The ratcheting characteristics of cylindrical shell under cyclic axial loading are investigated. The specimens are subjected to stress-controlled cycling with non-zero mean stress, which causes the accumulation of plastic strain or ratcheting behavior in continuous cycles. Also, cylindrical shell shows softening behavior under symmetric axial strain-controlled loading and due to the localized buckling, which occurs in the compressive stress-strain curve of the shell; it has more residual plastic strain in comparison to the tensile stress-strain hysteresis curve. The numerical analysis was carried out by ABAQUS software using hardening models. The nonlinear isotropic/kinematic hardening model accurately simulates the ratcheting behavior of shell. Although hardening models are incapable of simulating the softening behavior of the shell, this model analyzes the softening behavior well. Moreover, the model calculates the residual plastic strain close to the experimental data. Experimental tests were performed using an INSTRON 8802 servo-hydraulic machine. Simulations show good agreement between numerical and experimental results. The results reveal that the rate of plastic strain accumulation increases for the first few cycles and then reduces in the subsequent cycles. This reduction is more rapid for numerical results in comparison to experiments.

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.30-33
• /
• 2000

The objective of this study is to examine the subsitiution effect of the waste oyster shell powder as the conditioning agent in municipal wasterwater sludge dewatering process. Beacuse the oyster shells have a large amount(about 38% by weight) of alkaline minerals, such as calcium and magnesium, they are thought to have the potential as a good conditioning agent. In this study, the physico-chemical properties of powdered oyster shells (75${\mu}{\textrm}{m}$ or 200 mesh) and the dewatering characteristics of municipal waste water sludge using powdered oyster shells and CaCO3 are investigated. The conclusions are as follows, 1. Oyster shell could produce calcium ions up to 14ppm at pH-7.0, and this represents that oyster shell is a potential properties as a good conditioner. 2. 100ml of wastewater sludges, conditioned with pretreated oyster shell, are dewatered to the level of 25% solid concentration. 3. Wasterwater sludges, conditioned with oyster shell and CaCO3 are dewatered to the level of 32% solid concentration. And this shows that two-stage combined conditioning process is desirable than the one-stage conditioning process.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.36-42
• /
• 2017

Helical gear excitation is transmitted to a gearbox through the shafts and bearings and the vibration of the gearbox radiates the noise in the air. Therefore gearbox modeling is essential to evaluate the gear noise. This work deals with vibration and acoustic analysis of a cylindrical shell-type gearbox with/without holes excited by helical gears and focuses on the development of the simple gearbox model. To do so, helical gears and bearing forces are calculated. Gearbox with/without holes is modeled by the aluminum end plates and PMMA cylindrical shell body. The vibration mode and the forced harmonic response were calculated by the commercial FE software and the end plate of the gearbox is more contributed to vibration than the body. Acoustic analysis was also conducted by the commercial acoustic software and a cylindrical shell type gearbox with/without holes has the similar vibro-acoustic characteristics.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.162-169
• /
• 2004

In order to investigate a recycling possibility as a construction material of oyster-shells, the geotechnical characteristics including N-value, confined compression and shear strength for oyster shell mixed soils were quantitatively examined. Experimental results show that the oyster shell mixed soils are lighter than sand in weight, and have similar characteristics of shear strength with sandy soils. Based on the experimental results, it is highly judged that crushed oyster-shell can be a substitute of sand as the SCP method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.10
• /
• pp.767-776
• /
• 2003

The theoretical method is developed to Investigate the nitration characteristics of the combined cylindrical shells with an annular plate joined to the shell at any arbitrary axial position. The structural coupling between shell and plate is simulated using two types of artificial springs a translational spring is introduced for translational coupling and a rotational spring is used for rotational coupling. The springs are continuously distributed along circumferential direction. Using the Rayleigh-Ritz method the natural frequencies and mode shapes of the combined shell with an annular plate examine. The effect of Inner-to-outer radius ratio, axial position of annular plate and length-to-radius ratio of shell on vibration characteristics of combined cylindrical shells is studied. The theoretical results are verified by comparison with FEM results.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.10-14
• /
• 2011

Emulsion polymerization was carried out using RMA like MMA, EMA, BMA and Styrene(St.) as monomer for core-shell latex preparation. It was synthesized at $80^{\circ}C$ in the presence of anionic surfactant SLS. FT-IR, TGA and DSC analysis are used to confirm synthesized core-shell emulsion latexes and to investigate the thermal characteristics of them. From analysis of TGA and DSC, the differences of the decomposition rate and the activation energy are not so large. It considers that the pendent group is not affect of the thermal characteristics and stability on core-shell latexes, which is synthesized with RMA and Styrene.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.4
• /
• pp.43-51
• /
• 2001

An experimental modal analysis is the process to identify structure's dynamic characteristics such as resonant frequencies, damping values and mode shapes. An experimental model was made of stainless steel in the shape of a circular cylindrical shell and installed on the test bed with jigs. For investigating vibrational characteristics of the continuous circular cylindrical shell with intermediate supports, modal testing is performed by using impact hammer, accelerometer and 8-channel FFT analyzer. The frequency response function(FRF) measurements are also made on the experimental model within the frequency range from 0 to 4kHz. Modal parameters are identified from resonant peaks in the FRF's and animated deformation patterns associated with each of the resonances are shown on a computer screen. The experimental results are compared with analytical and FEA results.

• Korean journal of food and cookery science
• /
• v.26 no.2
• /
• pp.188-197
• /
• 2010

In this study, the quality characteristics and storage properties of gat kimchi added with oyster shell powder and Salicornia herbacea powder were investigated during a storage time of 80 days at $5^{\circ}C$. After storage for 80 days, the average calcium contents were significantly higher in the kimchi containing the oyster shell powder and Salicornia herbacea powder than the control. In addition, the average hardness value was significantly higher in the OS4 group(oyster shell powder at 4% and Salicornia herbacea powder at 2%) than the control group, as well as the OS10 group(oyster shell powder at 10% and Salicornia herbacea powder at 2%) during storage for 80 days. The hunter b value of the OS4 group was significantly lower than the control group. During fermentation, gat kimchi containing the oyster shell powder and Salicornia herbacea powder had a higher pH and a lower acidity value than the control group. In terms of sensory evaluation, there were no significant differences between the control and calcium-added kimchi during fermentation. After 40 days of storage, the OS4 group showed a lower total viable count, as well as lower lactic acid bacteria, yeast and E. coli, as compared with the control and OS10 groups. Based on the microbial load, the gat kimchi containing the oyster shell powder showed limitations in terms of shelf life.