• Structural Engineering and Mechanics
• /
• v.38 no.6
• /
• pp.803-823
• /
• 2011

In this paper, the three dimensional Parallel Realistic Failure Process Analysis ($RFPA^{3D}$-Parallel) code based on micromechanical model is employed to investigate the bonding behavior in FRP sheet bonded to concrete in single shear test. In the model, the heterogeneity of brittle disordered material at a meso-scale was taken into consideration in order to realistically demonstrate the mechanical characteristics of FRP-to-concrete. Modified Mohr-coulomb strength criterion with tension cut-off, where a stressed element can damage in shear or in tension, was adopted and a stiffness degradation approach was used to simulate the initiation, propagation and growth of microcracks in the model. In addition, a Master-Slave parallel operation control technique was adopted to implement the parallel computation of a large numerical model. Parallel computational results of debonding of FRP-concrete visually reproduce the spatial and temporal debonding failure progression of microcracks in FRP sheet bonded to concrete, which agrees well with the existing testing results in laboratory. The numerical approach in this study provides a useful tool for enhancing our understanding of cracking and debonding failure process and mechanism of FRP-concrete and our ability to predict mechanical performance and reliability of these FRP sheet bonded to concrete structures.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.41-45
• /
• 2010

In order to obtain thinner and brighter backlight units (BLU), we simulated a new-type backlight unit. A micro-lens array sheet was formed on the upper plane of the light guide plate (LGP) comprising the backlight unit. Also, in order to match with the LGP, we simulated a functional optical sheet. The conventional BLU uses one LGP and four optical sheets, but we simulated a BLU that uses one optical sheet. Simulation results have revealed that our BLU can achieve the same luminance and 30% better view angle as compared with conventional ones.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1503-1511
• /
• 1991

본 연구에서는 곡면을 포함할 수도 있는 얇은 물체를 모델링하기 위해 새로운 기법을 도입했는데, 그 기본 개념은 다음과 같다. Fig.(a)에서와 같이 먼저 사용자 는 박판으로 불리는 두께가 없는 얇은 판을 여러장 가지고 이들을 접거나, 오려내거나, 붙이는 등의 작업을 통해서 원하는 형상으로 모델링한다.각각의 박판의 형상의 입 력은 거의 모두 2차원 좌표계에서 이루어지기 때문에, 사용자는 마치 철판위에 선을 긋는 것과 같이 쉽게 박판의 형상을 입력할 수 있다. 또한 박판에서 임의의 부분을 오려내거나 임의의 박판을 붙이는 등의 작업을 통해서 원하는 형상으로 모델링한다. 각각의 박판의 형상의 입력은 거의 모두 2차원 좌표계에서 이루어지기 때문에, 사용자 는 마치 철판위에 선을 긋는 것과 같이 쉽게 박판의 형상을 입력할 수 있다. 또한 박판에서 임의의 부분을 오려내거나 임의의 박판을 붙이는 등의 작업이 기존의 시스템 에서와는 달리 복잡한 입력이나, 수행과정을 거치지 않기 때문에, 보다 편리한 모델링 을 할 수 있다. 또한 곡면으로 된 박판 형상의 경우는 해당되는 모서리들을 곡선으 로 바꿈으로써 모델링 되도록 하였다. 박판의 모델링이 끝나면, 입력된 박판에 일정 한 두께를 부여하여 Fig.2(b)에서와 같이 부피를 갖는 입체(솔리드)로 변환하게 되는 데 이 작업은 Stroud에 의한 것과 같이 시스템에서 자동으로 이루어진다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.88-99
• /
• 1996

The explicit scheme for finite element analysis of sheet metal forming problems has been widely used for providing practical solutions since it improves the convergency problem, memory size and computational time especially for the case of complicated geometry and large element number. The explicit schemes in general use are based on the elastic-plastic modeling of material requiring large computataion time. In the present work, a basic formulation for rigid-plastic explicit finite element analysis of plain strain sheet metal forming problems has been proposed. The effect of some basic parameters involved in the dynamic analysis has been studied in detail. Thus, the effective ranges of parameters have been proposed for numerical simultion by the rigid-plastic explicit finite element method. A direct trial-and-error method is introduced to treat contact and friction. In computation, sheet material is assumed to possess normal anisotropy and rigid-plastic workhardening characteristics. In order to show the validity and effectiveness of the proposed explicit scheme, computations are carried out for cylindrical punch stretching and the computational results are compared with those by the implicit scheme as well as with a commercial code. The proposed rigid-plastic exlicit finite element method can be used as a robust and efficient computational method for analysis of sheet metal forming.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1725-1729
• /
• 2013

In this paper, the modeling and simulation of infrared absorption in an infrared absorbing structure with the cascaded transmission line model were carried out. Each layer in the infrared absorbing structure can be modeled as a characteristic impedance of the cascaded transmission line model. The simulation results show that the cavity thickness to get a maximum absorption should be less than a quarter wavelength, which is somewhat different from prevalent thickness. It can be assured that the sheet resistance of an absorbing layer to get a maximum absorption is $377{\Omega}/{\square}$, that the thickness of the absorbing layer dose not affect the spectral characteristics of absorption. It is also shown that the thickness of the active layer is not critical to the IR absorption. It can also be assured that the validation of this modeling is proved in comparison with the previous results from similar absorbing structures.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.563-566
• /
• 2002

This paper presents the modeling and analysis of wind turbine generating system(WTGS) using doubly fed induction machine as a generator Generally, wind turbine generating system is composed of complicated machinery. So it is very difficult to present the mathematic model. This means that WTGS has a nonlinear system. Using the real output data from the WTGS for one year, it is simply possible to express the rotor and gear coupling system as a torque generator according to wind speed. Also, the modeling of electrical system can be able to present using the data sheet from the company. To analyze the proposed method, computer simulation using Psim program are presented to support the discussion.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.222-223
• /
• 2010

TOP245P driver IC modeling technique are proposed for the LED Driver design. Analog behavioral model of TOP245P IC including the shunt regulator, under-voltage(UV) detection, over-voltage(OV) shut-down and SR flip-flop is developed by using PSPICE. The averaged-model and switching-model is applied to the LED driver simulation. The simulation results by the proposed TOP245P IC modeling technique are in good agreement with that in the data sheet and an experiment data.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.9
• /
• pp.741-746
• /
• 2009

Compare to conventional Indium Tin Oxide (ITO) film deposition methods, cesium assisted sputtering method has been shown superior electrical, mechanical, and optical film properties. However, it is not easy to use cesium assisted sputtering method since ITO film properties are very sensitive to Cesium assisted equipment condition but their mechanism is not yet clearly defined physically or mathematically. Therefore, to optimize deposited ITO film characteristics, development of accurate and reliable process model is essential. For this, in this work, we developed ITO film deposition process model using neural networks and design of experiment (DOE). Developed model prediction results are compared with conventional statistical regression model and developed neural process model has been shown superior prediction results on modeling of ITO film thickness, sheet resistance, and transmittance characteristics.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.122-132
• /
• 1999

This study describes a dynamic model of the hydroforming process which is used for precision forming of sheet metals. To help the controller design for the control of the forming pressure needed for this process as well as to investigate the effect of system parameters on the dynamic behavior, dynamic modeling is performed with emphasis on hydraulic servo system which actuates the forming machine. Since the model contains several unknown parameters, these were estimated via a least square parameter identification method. Based upon the identified model, a series of simulations were performed for various operating conditions. The results were compared with those of the experiments to verify the validity of the proposed model. The comparison study shows that the proposed dynamic model can describe dynamic behavior of the forming pressure of the hydroforming process to desirable accuracy.

• International Journal of Automotive Technology
• /
• v.1 no.1
• /
• pp.35-41
• /
• 2000

The crashworthiness of vehicles with finite element methods depends on the geometry modeling and the material properties. The vehicle body structures are generally composed of various members such as frames, stamped panels and deep-drawn parts from sheet metals. In order to ensure the impact characteristics of auto-body structures, the dynamic behavior of sheet metals must be examined to provide the appropriate constitutive relation. In this paper, high strain-rate tensile tests have been carried out with a tension type split Hopkinson bar apparatus specially designed for sheet metals. Experimental results from both static and dynamic tests with the tension split Hopkinson bar apparatus are interpolated to construct the Johnson-Cook and a modified Johnson-Cook equation as the constitutive relation, that should be applied to simulation of the dynamic behavior of auto-body structures. Simulation of auto-body structures has been carried out with an elasto-plastic finite element method with explicit time integration. The stress integration scheme with the plastic predictor-elastic corrector method is adopted in order to accurately keep track of the stress-strain relation for the rate-dependent model accurately. The crashworthiness of the structure with quasi-static constitutive relation is compared to the one with the rate-dependent constitutive model. Numerical simulation has been carried out for frontal frames and a hood of an automobile. Deformed shapes and the Impact energy absorption of the structure are investigated with the variation of the strain rate.