• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.35-39
• /
• 2000

$ZnIn_2S_4$ and $ZnGaInS_4:Er^{3+}$ single crystals crystallized in the rhombohedral (hexagonal) space group $C_{3v}^5(R3m)$, with lattice constants $a=3.852{\AA},\;c=37.215{\AA}$ for $ZnIn_2S_4$, and $a=3.823{\AA}$, and $c=35.975{\AA}$ for $ZnIn_2S_4:Er^{3+}$. The optical absorption measured near the fundamental band edge showed that the optical energy band structure of there compounds had a direct and indirect band gap, the direct and indirect energy gaps are found to be 2.778 and 2.682 eV for $ZnIn_2S_4$, and 2.725 and 2.651eV for $ZnIn_2S_4:Er^{3+}$ at 293 K. The photoluminescence spectra of $ZnIn_2S_4:Er^{3+}$ measured in the wavelength ranges of $500nm{\sim}900nm$ at 10 K. Eight sharp emission peaks due to $Er^{3+}$ ion are observed in the regions of $549.5{\sim}550.0nm,\;661.3{\sim}676.5nm$, and $811.1{\sim}834.1nm$, and $1528.2{\sim}1556.0nm$ in $CdGaInS_4:Er^{3+}$ single crystal. These PL peaks were attributed to the radiative transitions between the split electron energy levels of the $Er^{3+}$ ions occupied at $C_{2v}$, symmetry of the $ZnIn_2S_4$ single crystals host lattice.

• 한국어류학회지
• /
• 제24권2호
• /
• pp.143-146
• /
• 2012

납작금눈돔과에 속하는 Aulotrachichthys prosthemius 1개체(표준 체장 74.8 mm)가 제주도 주변 해역에서 처음으로 채집되었다. 이 종은 등지느러미 기조수 V, 13, 뒷지느러미 기조수 III, 9, 아가미 뚜껑 위쪽에 날카로운 가시를 갖고 있으며 배쪽 줄은 뒷지느러미 끝을 도달하는 점에서 A. prosthemius로 확인되었다. 이 미기록종의 속명과 국명은 "은줄금눈돔속", "은줄금눈돔"으로 각각 제안하였다.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.197-205
• /
• 2017

Lead dioxide thin films were electrodeposited on nickel substrate from acidic lead nitrate solution. Current efficiency and thickness measurements, cyclic voltammetry, AFM, SEM, and X-ray diffraction experiments were conducted on $PbO_2$ surface to elucidate the effect of lead nitrate concentration, current density, temperature on the morphology, chemical behavior, and crystal structure. Experimental results showed that deposition efficiency was affected by the current density and solution concentration. The film thickness was independent of current density when deposition from high $Pb(NO_3)_2$ concentration, while it decreased for low concentration and high current density deposition. On the other hand, deposition temperature had negative effect on current efficiency more for lower current density deposition. Cyclic voltammetric study revealed that comparatively more ${\beta}-PbO_2$ produced compact deposits when deposition was carried out from high $Pb(NO_3)_2$ concentration. Such compact films gave lower charge discharge current density during cycling. SEM and AFM studies showed that deposition of regular-size sharp-edge grains occurred for all deposition conditions. The grain size for high temperature and low concentration $Pb(NO_3)_2$ deposition was bigger than from low temperature and high concentration deposition conditions. While cycling converted all grains into loosely adhered flappy deposit with numerous pores. X-ray diffraction measurement indicates that high concentration, high temperature, and high current density favored ${\beta}-PbO_2$ deposition while ${\alpha}-PbO_2$ converted to ${\beta}-PbO_2$ together with some unconverted $PbSO_4$ during cycling in $H_2SO_4$.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.90-93
• /
• 2002

In particle radiotherapy, a shape of the beam to conform the irradiation field is statically defined by the compensator, collimator and potal devices at the outside of the patient body. However the target such as lung or liver cancer moves along with respiration. This increases the irradiated volume of normal tissue. Prior discussions about organ motions along with respiration have been mainly focused on inferior-superior movement that was usually perpendicular to beam axis. On the other hand, the change of the target depth along the beam axis is very important especially in particle radiotherapy, because the range end of beam (Bragg peak) is so sharp as to be matched to distal edge of the target. In treatment planning, the range of the particle beam inside the body is calculated using a calibration curve relating CT number and water equivalent path length (WEL) to correct the inhomogeneities of tissues. The variation in CT number along the beam path would cause the uncertainties of range calculation at treatment planning for particle radiotherapy. To estimate the uncertainties of the range calculation associated with patient breathing, we proposed the method using sequential CT images with respiration waveform, and analyzed organ motions and WELs at patients that had lung or liver cancer. The variation of the depth along the beam path was presented in WEL rather than geometrical length. In analyzed cases, WELs around the diaphragm were remarkably changed depending on the respiration, and the magnitude of these WEL variations was almost comparable to inferior-superior movement of diaphragm. The variation of WEL around the lung was influenced by heartbeat.

• 자동차안전학회지
• /
• 제9권4호
• /
• pp.26-31
• /
• 2017

The current autonomous vehicle competitions are dominated by a few leading research institutions and universities. Since the leading research groups have been able to accumulate their knowledge and to develop their own algorithms for autonomous vehicle for many years, the technology gap seems too big for other followers to catch up with. On the other hand, recent researches predict that there would be a sharp rise in demand for engineers with background in autonomous vehicle technology. Therefore, it would be warranted to further expand the base of the academia and autonomous vehicle industry. In an effort to achieve this goal, it would be beneficial to hold a new format of autonomous vehicle competition event where undergraduate students can play a leading role. So, this study is to analyze the current autonomous vehicle competitions and thus to establish a strategic plan to develop a unique and improved competition event. This study investigates the pros and cons of the domestic and international autonomous vehicle competitions. Based on the analysis for the current autonomous vehicle competitions, the authors suggest a strategic plan to initiate an autonomous vehicle competition. To implement the aforementioned strategic plan, it is necessary to develop a systematic environment where the education and communication are actively available. Through the strategic plan the authors propose, the newly launching autonomous vehicle competition will able to encourage the undergraduate students and professors to dive in the cutting-edge technology thereby increasing technology competitiveness.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.583-588
• /
• 2015

완전접촉 문제를 이론적으로 해석하기 위해서 점근해법이 많이 사용된다. 점근해로서의 응력장은 특이항 만으로 구성되므로 접촉경계로부터 멀어질수록 정확도가 감소한다. 이에 반해 유한요소해석 방법은 요소크기의 제한으로 인해 완전접촉 문제에서의 응력특이성을 엄밀히 표현할 수 없다. 따라서 본 연구에서는 이론적 해법을 보조하고 또 그와 비교하기 위해 응착접촉 상태에 있는 완전접촉 문제를 이론적으로 해석한 후, 모아레 실험 및 유한요소해석 방법으로 접촉부 부근의 응력장을 분석하였다. 실험은 알루미늄과 구리 합금을 접촉각 $120^{\circ}$, $135^{\circ}C$로 가공하여 수행하였으며 모아레 무늬로부터 얻은 변위장과 유한요소해석을 수행한 결과와 비교하였다. 이로부터 타당성이 확보된 수치적 방법을 이용하여 실험조건에서의 일반화 응력확대계수와 접촉부 응력장을 구하여 이론 해와 비교하였으며, 접촉경계로부터 멀어질 때 나타나는 이론과 수치 해의 차이를 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1367-1372
• /
• 2008

A plate type supporting structure of a tube bundle in axial flow generates a certain band of a high frequency periodic excitation of a vortex shedding and/or a flow separation due to sharp edge of the plate thickness and a severe pressure drop due to a cross-sectional area of the supports. With a design consideration of the low vibration and a small flow resistance, the analysis method is uniquely confined to an experimental approach because a complex geometry of a cylindrical tube bundle and/or physical phenomena related to the fluid-structure interaction of tube bundle in a flow impede a theoretical or a numerical approach. A 5x5 cylindrical tube bundle with 5 supports which were discretely located along the bundle's axis was tested in the FIVPET hydraulic test loop for a design evaluation and an analysis perspectives. A high frequency flow-induced vibration of the supporting structures of the cylindrical tube bundle was measured at a outer surface of a supporting structure through a transparent flow housing by the laser dopper vibrometer. Pressure drop in-between three measurement distances was measured by the differential pressure transmitter. High frequency vibration and pressure drop fairly depends on the geometric design of supporting structure. So, these two parameters would be used as a qualitative design variables for design evaluation and analysis.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.463-466
• /
• 2008

현대 사회에서 영상처리 기술이 발달함에 따라 영상은 정보를 저장하거나 표현하기 위한 중요한 수단이 되고 있다. 일반적으로 영상을 획득 및 저장하는 과정에서 노이즈에 의해 영상이 훼손되며 이러한 노이즈에는 크게 AWGN(Addictive White Gaussian Noise)와 임펄스 잡음(Impulse Noise)이 있다. 임펄스 노이즈는 영상신호에서 예리하고 급작스런 교란으로 영상 전반에 걸쳐 black and white로 불규칙하게 펴저 나타나게 된다. 임펄스 노이즈 환경에서는 알고리즘이 간단하면서 노이즈 제거 성능이 우수한 SM(standard median)필터가 많이 사용되며, SM 필터는 노이즈를 제거하지만 영상에지에서 오류를 나타내어 전체 영상의 품질을 저하시킨다. 이와 같은 문제를 해결하기 위해 따라서 본 논문에서는 임펄스 노이즈 환경에서 영상을 복원하기 위해 비선형 필터를 제안하였으며, 노이즈를 제거함과 동시에 방향성을 이용하여 영상의 에지성분을 보존하도록 하였다. 그리고 시뮬레이션을 통해 기존의 방법들과 그 성능을 비교하였다.

• 한국전자파학회논문지
• /
• 제26권1호
• /
• pp.30-38
• /
• 2015

본 논문에서는 삼중 $TE_{01{\delta}}$ 모드를 가지는 세라믹 유전체 공진기와 새로운 결합 네트워크를 이용한 대역 통과 여파기를 제안한다. 원통형 유전체 공진기의 삼중 공진 모드를 이해하고, 모드 간 결합분석을 통해 900 MHz 대역의 대역 통과여파기의 설계를 보인다. 유전체 공진기의 높은 품질계수와 제어 가능한 3개의 전송 영점을 통해 우수한 삽입 손실과 감쇄 특성을 얻을 수 있으며 기존 단일 모드 유전체 공진기를 이용한 여파기와 비교하여 60 %의 소형화를 달성하였다. 제안된 대역 통과 여파기 및 설계방법은 회로 해석 및 3차원 모의실험과 측정을 통하여 설계목표와 비교 분석되어 그 타당성을 증명하였다.

• 대한인간공학회지
• /
• 제28권1호
• /
• pp.9-19
• /
• 2009

Repetitive movement, inadequate working posture, overuse of force, physical contact with sharp edge, vibration and temperature were well known risk factors of WMSDs (Work-related Musculoskeletal Disorders). Many researchers have investigated the relationship between inadequate working postures and incidences of WMSDs of the upper extremities, whereas relatively few researchers have tried to evaluate workload associated with the lower-body postures. The effects of lower-limb postures including various knee flexion angles on the subjective discomfort, heart rate and EMG of lower-limb muscles were investigated in this study. Thirty graduate students were asked to maintain thirteen different body postures, and heart rate and EMG data of five muscle groups (electro spine, biceps femoris, vastus medialis, gastrocnemius and tibialis anterior) from each posture were collected during fifteen minutes sustaining tasks. All participants were also asked to report their discomfort ratings of body parts. Results showed that high subjective discomfort ratings and heart rates were reported at the postures of knee angles of $60^{\circ}$ and $90^{\circ}$, whereas low discomfort ratings were founded at the postures of chair heights with 20cm, 40cm, and sitting with crossed legged. The change of median frequency for each muscle group during fifteen minutes tasks was investigated for each body posture to evaluate the relationship between muscle fatigue and body posture. It was found that the trends of changes of median frequency were different based on muscle group as well as lower-limb body posture from this study.