• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.371-383
• /
• 2012

Shaping the root canal system to maintain original canal curvature is essential to clinical success in endodontic treatment. Opposed to most root canals that are curved, endodontic instruments are made from straight metal blanks. They have a tendency of straightening the root canal during preparation and frequently result in procedural errors. A new treatment method to maintain original canal curvature during shaping has been introduced for preventing procedural errors. The aim of this study was to compare the ability of instruments to maintain original canal curvature of continuous rotary system and single file system. Thirty ISO 15, 0.02 taper, Endo Training Blocks(Dentsplay Maillefer) were used. Specimens were assigned to 1 of 3 groups for shaping: specimens in group 1 were shaped with ProFile #20/.06 at the WL. Specimens in group 2 were shaped with Mtwo #35/.04 at the WL. Specimens in group 3 were shaped with WaveOne Primary reciprocating files at the WL after the glide path was achieved with PathFile. Pre- and postinstrumentation digital images were superimposed and processed with Matlab r2010b(The MathWorks Inc, Natick, MA) software to analyze the curvature-radius ratio(CRr), representing canal curvature modification. Data for comparison on the ability of instruments to maintain original canal curvature depending on each Ni-Ti file were analyzed with 1-way ANOVA(P<.05). Data for comparison on the ability of instruments to maintain original canal curvature depending on each Ni-Ti file system were analyzed with independent t-test(P<.05). A statistically significant difference(P<0.05) was noted on each Ni-Ti file. ProFile and WaveOne instrumentations maintained the original canal curvature significantly better(P<0.05) than Mtwo file. There were no significant difference(P>0.05) between continuous rotary system and single file system. Under the conditions of this study, ProFile and WaveOne instruments maintained the original curvature significantly better than Mtwo file and were less modification of the canal curvature compared. There was no significant difference between continuous rotary system and single file system in shaping of simulated canals. As clinical practitioners, it may be advantages to use hybrid approach when root canal shapes depending on the design and usage of Ni-Ti files.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.1
• /
• pp.94-131
• /
• 2007

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2004 and 2005 has been done. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD and flow visualization(PIV, PTV and LDV methods) technologies were widely applied for developing facilities and their systems. (2) The research trends of the previous two yews are surveyed as groups of natural convection, forced convection, electronic cooling, heat transfer enhancement, frosting and defrosting, thermal properties, etc. New research topics introduced include natural convection heat transfer enhancement using nanofluid, supercritical cooling performance or oil miscibility of $CO_2$, enthalpy heat exchanger for heat recovery, heat transfer enhancement in a plate heat exchanger using fluid resonance. (3) The literature for the last two years($2004{\sim}2005$) is reviewed in the areas of heat pump, ice and water storage, cycle analysis and reused energy including geothermal, solar and unused energy). The research on cycle analysis and experiments for $CO_2$ was extensively carried out to replace the Ozone depleting and global warming refrigerants such as HFC and HCFC refrigerants. From the year of 2005, the Gas Engine Heat Pump(GHP) has been paid attention from the viewpoint of the gas cooling application. The heat pipe was focused on the performance improvement by the parametric analysis and the heat recovery applications. The storage systems were studied on the performance enhancement of the storage tank and cost analysis for heating and cooling applications. In the area of unused energy, the hybrid systems were extensively introduced and the life cycle cost analysis(LCCA) for the unused energy systems was also intensively carried out. (4) Recent studies of various refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and of alternative refrigerants including carbon dioxide. Efficiency of various compressors and expansion devices are also dealt with for better modeling and, in particular, performance improvement. Thermoelectric module and cooling systems are analyzed theoretically and experimentally. (5) According to the review of recent studies on ventilation systems, an appropriate ventilation systems including machenical and natural are required to satisfied the level of IAQ. Also, an recent studies on air-conditioning and absorption refrigeration systems, it has mainly focused on distribution and dehumidification of indoor air to improve the performance were carried out. (6) Based on a review of recent studies on indoor environment and building service systems, it is noticed that research issues have mainly focused on optimal thermal comfort, improvement of indoor air Quality and many innovative systems such as air-barrier type perimeter-less system with UFAC, radiant floor heating and cooling system and etc. New approaches are highlighted for improving indoor environmental condition as well as minimizing energy consumption, various activities of building control and operation strategy and energy performance analysis for economic evaluation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.113-121
• /
• 2010

Shumi-sen(須彌山), built by Nohjagong(路子工) in the southern garden of the Palace Garden during the Asuka Period, is understood as being Sumeru based on an Indian perspective of the theory of the origin of universe. It is also viewed as Mt. Myogoh from a Chinese Buddhist worldview. It is thought to be a type of assembled stone structure with Poong-ryoon (風輪)-Su-ryoon(水輪)-Geum-ryoon(金輪)-Ji-ryoon(地輪) carved into each of the 4 stone pieces. These building shapes are thought to have been utilized as stone for exterior construction as opposed to those structures built during the Shilla Period of China and Korea. Aside from Nohjagong's record of Shumi-sen, most of the records from Japan's period of the time suggest that Shumi-sen was an important element that played a role in the scenery of the seasonal outdoor gardens. It is also thought, from the sentences and expressions surrounding the records, that a combination of the seasonal sceneries was utilized centered on Shumi-sen, and that they were all used during festival events. From a perspective of analysis and interpretation dependent on the limited literature and on observation, it cannot be verified whether the Mt. Sumeru Stone(須彌山石) excavated from the Stone God Ruins is the same Shumi-sen that Nohjagong built along with Okyo(吳橋), but it is thought that the 'Shumi-sen type stone structure' that was later built repeatedly as part of the palace garden facilities is identical to the Shumi-sen built at the Imperial Palace's southern garden, or at least a re-built structure based on the Shumi-sen that Nohjagong built with stones and ponds used to create the foundation. Thus, Shumi-sen that Nohjagong supposedly built along with Okyo is suspected to be a figurative rock arrangement and, at the same time, a miniaturized scenic rock arrangement(縮景樹石) that maximized the shape of Buddhism's Shumi-sen. On the other hand, the surface pattern on Mt. Sumeru Stone is very similar to the multi -layers of mountainous pattern icons expressed in the patterns of the Great Golden Incense Burner(百濟金銅大香爐) or Mountain-Water Scenery Sculptural Brick(山水山景紋?) that were built during the Baekjae pcriod aod the rear side of Hwalsuk-jebul Basal Byungipsang(滑石諸佛菩薩竝立像); it is suspected that similar patterns would have been used if patterns were made on Shumi-sen that Nohjagong built. Also in consideration of the physical theory of MI. Sumeru Stone, the Siphon theory of using a pressure difference in water level was applied to the fountain facilities of Mt. Sumeru Stone that seemed to have been built from the practical rock arrangement perspective for the purpose of feasts, etc.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.2
• /
• pp.77-85
• /
• 2014

This study was conducted to examine the morphological characteristics of those Azalea Cultivars(hereinafter, Azalea Cultivars) that are mainly used for landscaping in Korea in order to prepare classification criteria. As testing materials, major Azalea Cultivars cultivated in large quantities by its producing companies were collected. Thereafter, the qualitative and quantitative characteristics of the traits of Azalea Cultivars were investigated in the way of characteristic investigation for new cultivars of azalea used by the Korea Seed and Variety Service in order to classify them and prepare the classification criteria. Since cultivar names have not been established for Azalea Cultivars for landscaping thus far, the data were compiled using the names used by cultivating companies. According to the results, Azalea Cultivars cultivated in Suncheon, Jeonnam mainly for landscaping were 10 in number; Beni, Daewang, Three, Zasanhong, Hancheol, Sancheoljuk, Gyeobsancheoljuk, Baekcheoljuk, Akado, and Seok-am. Among them, the cultivars Beni, Daewang, and Three could not be easily distinguished from each other because they are commonly called Yeongsanhong by cultivating companies and the shapes of their leaves and flowers are similar to each other. In particular, the flower color of Beni was 'bright red', that of Daewang was 'vivid purple', and that of Three was 'bright purple'. In addition, Zasanhong and Hancheol were similar to each other in shape the degree of expression of spots on the flowers and the gloss on the front side of the leaves of Hancheol were higher and stronger compared to that of Zasanhong. Sancheoljuk flowered in early April, earlier compared to other Azalea Cultivars. Gyeobsancheoljuk is an elementary species of Sancheoljuk and it had double flowers although all other traits were similar to those of Sancheoljuk. Although Baekcheoljuk was easily distinguished because it had white flowers, its leaves were similar to those of Akado the reason why these two cultivars could not be easily distinguished from each other. The cultivar Akado flowered early May later compared to other Azalea Cultivars and its flowers were relatively large in diameter as with Baekcheoljuk and Sancheoljuk. Finally, the cultivar Seok-am was easily distinguished because it had smaller leaves compared to other cultivars and it flowered late as with the cultivar Akado.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.135-146
• /
• 2011

Steel structures have been generally painted to prevent corrosion damage. However, the painted film is deteriorated with increase in service life, and then corrosion damage resulting in cross sectional area occurs on steel surface. As a result, the buckling strength of steel structures can be decreased due to the corrosion damages. The evaluation method of the axial buckling strength of columns about a variety of section shapes and supporting conditions have been presented, but evaluation method of buckling strength about irregular nonprismatic columns is not established. In this study, the axial buckling strength of corroded steels was evaluated based on the buckling test results of corroded steel specimens that were cut off at a temporary steel structure. The corroded specimens were picked up total 10 specimens according to various slenderness ratio from the web of a temporary structure's main beam. The length of specimens is 200, 300, 400, 500 and 600mm respectively. The rust productions were removed by the chemical treatment. Then, the surface geometry was measured at intervals of $1{\times}1mm$ by using the optical 3D digitizing system, and the residual thickness of the specimens was calculated. The axial buckling test was performed on 10 corroded specimens and 12 non-corroded specimens under the fixed-fixed support condition. From the test results, the effect of corrosion damages on axial buckling load was investigated. Regardless of corrosion damage degree, the axial buckling strength of corroded specimens and non-corroded specimens was evaluated identically by using minimum average residual thickness or average residual thickness to minus its standard deviation. Reasonable measuring intervals of residual thickness was proposed by using the results to apply for practical works.

• Journal of Intelligence and Information Systems
• /
• v.20 no.1
• /
• pp.67-101
• /
• 2014

The use of new technology greatly shapes the marketing strategies used by companies to engage their consumers. Among these new technologies, social media is used to reach out to the organization's audience online. One of the most popular social media channels to date is the microblogging platform Twitter. With 500 million tweets sent on average daily, the microblogging platform is definitely a rich source of data for researchers, and a lucrative marketing medium for companies. Nonetheless, one of the challenges for companies in developing an effective Twitter campaign is the limited theoretical and empirical evidence on the proper organizational usage of Twitter despite its potential advantages for a firm's external communications. The current study aims to provide empirical evidence on how firms can utilize Twitter effectively in their marketing communications using the association between brand personality and brand engagement that several branding researchers propose. The study extends Aaker's previous empirical work on brand personality by applying the Brand Personality Scale to explore whether Twitter brand communities convey distinctive brand personalities online and its influence on the communities' level or intensity of consumer engagement and sentiment quality. Moreover, the moderating effect of the product involvement construct in consumer engagement is also measured. By collecting data for a period of eight weeks using the publicly available Twitter application programming interface (API) from 23 accounts of Twitter-verified business-to-consumer (B2C) brands, we analyze the validity of the paper's hypothesis by using computerized content analysis and opinion mining. The study is the first to compare Twitter marketing across organizations using the brand personality concept. It demonstrates a potential basis for Twitter strategies and discusses the benefits of these strategies, thus providing a framework of analysis for Twitter practice and strategic direction for companies developing their use of Twitter to communicate with their followers on this social media platform. This study has four specific research objectives. The first objective is to examine the applicability of brand personality dimensions used in marketing research to online brand communities on Twitter. The second is to establish a connection between the congruence of offline and online brand personalities in building a successful social media brand community. Third, we test the moderating effect of product involvement in the effect of brand personality on brand community engagement. Lastly, we investigate the sentiment quality of consumer messages to the firms that succeed in communicating their brands' personalities on Twitter.

• Applied Microscopy
• /
• v.37 no.2
• /
• pp.83-91
• /
• 2007

The present study examined the epidermal changes of adhesive disks which occur during attachment in Parthenocissus tricuspidata using scanning and transmission electron microscopy. Several adhesive disks, each covered with a bract, develop from the shoot apical meristem during early development. In the initial stage, the adhesive disks are club-shaped and their upper and lower epidermis are indistinguishable. However, in the actively growing stage, they become spherical and both epidermis are clearly differentiated into the adventitious roots. Prior to wall attachment, the adhesive disks exhibit adaxial convex and abaxial concave shapes, and electron-dense substances are abundant in the vacuoles of epidermal cells. The peripheral area of the adhesive disk is adhered first to the wall surface, while the central area is drawn inward in a vacuum-like state during attachment. As the attachment progresses and the electron-dense substances continue to discharge, the upper and lower epidermis rapidly undergo deterioration and the disks shrink considerably. At this stage, structural changes of the lower epidermis occur much faster than in the upper one. The discharged substance is accumulated on the wall surface, and this aids the attachment of adhesive disks on the wall for long periods. In this manner, the shape and structure of the adhesive disk epidermis change drastically from initial growth to the mature stage. Further, the role of electron-dense substance and shrinkage of the disk during attachment has been discussed in Parthenocissus tricuspidata.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.985-996
• /
• 2007

The purpose of this study is to analyze the symbolism of traditional Korean patterns which reflect an emotional cultural background of Korean people, to apply modernized and developed patterns to Textile Design for fashion cultural products, and to explore productive direction of developing designs of fashion cultural products. The process of developing Textile Design of fashion cultural products which applied symbolism of traditional Korean patterns was conducted as follows. Firstly, based on '05 S/S-'07 S/S fashion trends, a design concept wat decided(man-urban ethnic style, woman-romantic ethnic style). Secondly, motive was abstracted from selected traditional patterns to develop into modem patterns. Thirdly, items were selected according to symbolic meaning of traditional Korean patterns. Man's items included shirts, necktie, and handkerchief which were highly preferred by Korean and foreign visitors. Finally, developed textile designs were diagrammed by item using textile CAD and an illustrator 10 and presented as images. The following results were obtained. First, textile designs for fashion cultural products, in which apply traditional patterns may reflect the understanding of traditional aesthetic beauty and philosophical approach by applying symbolic significance inherent in patterns as well as the aesthetics of the patterns. Second, traditional patterns have been recognized as old fashioned to consumers because they have been often used for traditional handicrafts or folk products. If their unique shapes are changed or simplified, emphasizing images, and trend styles and colors are used, they will be recreated as a modem design. Third, textile designs using traditional patterns may provide various images and visual effects according to techniques and production methods. Then, the method will be applied to many items. Finally, since traditional patterns in fashion cultural products can be used as our unique design elements, they can be utilized as the source of design inspiration for the development of value-added products.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.147-165
• /
• 2014

Around the turn of 21st century, there has been a major technological shift in the animation industry. With development of reality-based computer graphics, major American animation studios replaced hand-drawn method with the new 3D computer graphics. Traditional animation was known for its simplified shapes such as circles and triangle that makes characters' movements distinctive from non-animated feature films. Computer-generated animation has largely replaced it, but is under continuous criticism that automated movements and reality-like graphics devaluate the aesthetics of animation. Although hand-drawn animation is still produced, 3D computer graphics have taken commercial lead and there has been many changes to acting of animated characters, which calls for detailed investigation. Firstly, the changes in acting of 3D characters can be traced from looking at human-like rigging method that mimics humanistic moving mechanism. Also, if hair and clothing was part of hand-drawn characters' acting, it has now been hidden inside mathematical simulation of 3D graphics, leaving only the body to be used in acting. Secondly, looking at "Stretch and Squash" method, which represents the distinctive movements of animation, through the lens of media, a paradox arises. Hand-drawn animation are produced frame-by-frame, and a subtle change would make animated frames shiver. This slight shivering acts as an aesthetic distinction of animated feature films, but can also require exaggerated movements to hide the shivering. On the contrary, acting of 3D animation make use of calculated movements that may seem exaggerated compared to human acting, but seem much more moderate and static compared to hand-drawn acting. Moreover, 3D computer graphics add the third dimension that allows more intuitive movements - maybe animators no longer need fine drawing skills; what they now need is directing skills to animate characters in 3D space intuitively. On the assumption that technological advancement and change of artistic expressionism are inseparable, this paper compares acting of 3D animation studio Pixar and classical drawing studio Disney to investigate character acting style and movements.

• Microbiology and Biotechnology Letters
• /
• v.48 no.2
• /
• pp.205-214
• /
• 2020

Cyanobacteria are microorganisms which have important roles in the nitrogen cycle due to their ability to fix nitrogen in water and soil ecosystems. They also produce valuable materials that may be used in various industries. However, some species of cyanobacteria may limit the use of water resources by causing harmful algal blooms in water ecosystems. Many culture collection depositories provide cyanobacterial strains for research, but their systematic preservation is not well-developed in Korea. In this study, we developed a method for the cryopreservation of the cyanobacteria Trichormus variabilis (syn. Anabaena variabilis), using alginate microcapsules. Two approaches were used for the experiments and their outputs were compared. One of the methods involved the cryopreservation of cells using only a cryoprotectant and the other used the cryoprotectant within microcapsules. After cryopreservation for 35 days, cells preserved with both methods were successfully regenerated from the initial 1.0 × 10⁵ cells/ml to a final concentration of 6.7 × 10⁶ cells/ml and 1.1 × 10⁷ cells/ml. Irregular T. variabilis shapes were found after 14 days of regeneration. T. variabilis internal structures were observed by transmission electron microscopy (TEM), revealing that lipid droplets were reduced after cryopreservation. The expression of the mreB gene, known to be related to cell morphology, was downregulated (54.7%) after cryopreservation. Cryopreservation using cryoprotectant alone or with microcapsules is expected to be applicable to other filamentous cyanobacteria in the future.