• Korean Journal of Computational Design and Engineering
• /
• v.3 no.2
• /
• pp.103-112
• /
• 1998

In this paper insertion of numerous control points to be performed by using the Chebyshev polynomial root at the selection of knot vector. This method introduces a simple method of knot refinement and it is applied in a developed program. The Chebyshev roots exist densely in broth ends of the range and are proposed more effective knot refinement to modify a surface. Therefore, generated control points are relatively uniform in specified knot interval. In the surface generation, a local insertion of numerous control points are easily inserted by using the characteristic of Chebyshev polynomial roots at knot refinement. It is possible to create a complex surface with a single surface. The number of control point can be reduced by using the local insertion of control points in a required shape

• Journal of Ocean Engineering and Technology
• /
• v.10 no.4
• /
• pp.28-37
• /
• 1996

A finite element analysis code considering elasto-plastic large deformation is developed to predict the ultimate strength of circular cylinders subject to external pressure loading by introducing a new type of axisymmetric shell element which can take into account the plasticity effect due to the circumferential bending while drastically saving the computing efforts compared with the tree dimensional finite element analysis. It is observed that analsis results of present approach show good agreement with the test results of previous works. Parametric study gives the effects of initial imperfections on ultimate strength ahd this information is recommended to be used to modify the actual test data to the ones which can be used more reasonably in making empirical design formulas.

• Journal of Korea Foundry Society
• /
• v.24 no.3
• /
• pp.145-152
• /
• 2004

The eutectic Si in Al-8.5wt.%Si alloy was changed from large flake to fine lemellar(or fibrous) shape when the Sc amount in the Al-Si alloy reaches 0.2wt.%. The optimum amount of Sc for the best modification effect was 0.8wt.% and slight decrease of modification effect occurred over this value. The study on the distribution of the modifiers(Sr, Na, and Sc) and the measurement of the surface tension of the Al-8.5wt.%Si alloy melt added with Sr, Na, and Sc modifier, respectively, reveals that Sc modifies the eutectic Si by the decrease of surface tension, while Sr and Na modify the eutectic Si mainly by impurity induced twinning mechanism.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.445-450
• /
• 1995

This paper deals with conversion from STL file to Slice cross-sectional information for Stereolithography. The STL file consist of three vertices of triangle and normal vectors in order to represent three dimension shape, but It is very difficult to convert STL file intoSlice file directly, because of file size from one Mbyte to tens of Mbytes. So, The system is accomplished data flow such as neutral.dat, .SL1, .SL2, .SL3, and .SLC file. The data processing is as follows: 1. Create a neutral file including common information. 2. Modify STL file within effective scope of SLA. 3. Calculate a point of intersection between plane equation and line equation. 4. Sort z values by increasing order. 5. Search closed loop by method of singlylinked linear list. The system is developed by using Borland C++ 3.1 compiler in the environment of Pentium PC. We get a satisfactory prototype as a result of application about a lot of household electrical appliances.

• Transactions of Materials Processing
• /
• v.8 no.2
• /
• pp.127-134
• /
• 1999

This study suggests the practical method which can reduce the lead time of the field trial and design of the dies. The virtual manufacturing, with which the die design is evaluated by computer analysis, reveals the impropriety of a design before die makings. Three methods for reducing the die making process occupying over 60% of the automotive development are like follows: First, the crack and wrinkle occurrence can be prevented by virtually adjusting the blank holding force and drawbead force with a computer simulation. Second, the parts which can not remove the forming defects in spite of the adjustment of forming parameters need to modify the part geometry or punch temporary shape. Third, the simulation before field trial, and field trial simulation can be effectively used in die design.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.232-237
• /
• 2006

Operation deflection shapes(ODS) is defined as a motion of structure at particular frequency. The ODS is eligible to show any types of structural motions while the modes supply solutions only to linear and stationary motion. The principal vibration source of an auto teller machine(ATM) case was occurred due to resonance which was found by modal analysis. To reduce the vibration of ATM case, the motion of the case was visualized using ODS analysis, which can suggest how to modify the structure. As a result the vibration of the ATM case was greatly reduced with a stiffening bar between the opposite plates.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.217-222
• /
• 2006

This paper describes a development of ultrasonic examination analysis software to analyze steam generator of nuclear power plant. The developed software includes classical analysis method such as A, B, C and D-scan images. This software provides the information of shape, depth, size and position of flaws. To do such, we obtain raw data from specimens and/or real pipeline of power plants and, modify the obtained ultrasonic 1-dimensional data according to prepared software design schedule. The developed analysis software is applied to specimens containing various flaws with known dimensions. The results of applications showed that the developed software provided accurate and enhanced images of flaws on various specimens.

• Journal of Korea Foundry Society
• /
• v.28 no.2
• /
• pp.69-73
• /
• 2008

In the present study, microstructural evolution and mechanical properties of Ti-Fe-Sn ultrafine eutectic alloys have been investigated. Ultrafine eutectic microstructure consisting of a mixture of ${\beta}$-Ti solid solution and TiFe intermetallic compound homogeneously formed in $(Ti_{70.5}Fe_{29.5})_{100-x}Sn_x$ alloys with x = 0, 1 and 3. Addition of Sn is effective to modify the eutectic colony into the spherical shape with decreasing the lamellar spacing and colony size. This results in enhancing the macroscopic plasticity up to 3.1% of the Ti-Fe-Sn ultrafine eutectic alloys.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.2
• /
• pp.44-50
• /
• 2001

The Sirocco fan performance and its three-dimensional flow characteristics are numerically prediction by STAR-CD. Turbulent flow computations are performed using approximately 500,000 mesh points, and the performance results of tow computational methods, transient and quasi-static flow analyses are compared with experimental data. In the present study, our attention is focused on the three-dimensional flow characteristics of the Sirocco fan blades and the secondary flow structure in the scroll. For a design optimization study, the scroll shape is titled by $10^\circ$ to modify the secondary flow structure, which yields some improvement of the fan performance.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.2
• /
• pp.225-231
• /
• 2010

This paper proposes the strategy of ladder trades in a symbol pool and simulates a performance of it on the Multicharts' system trading tool. The ladder trading strategy is based on a multi-entry strategy which is efficient for several symbols. A symbol pool is composed of verified stocks comprising KOSPI200 and 17 symbols are selected for an examination which equity is over 10 billion. From July to December in 2009, optimum parameters are searched and the results are delta is 4% and ladder is 5. When those parameters are adopted, the profit is 1,000,000 won as a single trade and the number of trade is 188. The next study is to modify a ladder shape for increasing probability and to find the difference of optimum parameters according to trading months.