• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.252-255
• /
• 2004

Design modification of the stamping die for the upper member of a front end module carrier is carried out in order to improve the feeling qualify of the final product. The small inferiority induced by wrinkling near the wall of the FEM upper member has been inspected after the draw-forming process. The finite element simulation shows that the excess metal is developed by the irregular contact of the blank the tool and it remains after the final stroke. This paper proposes two guidelines for the modification: one is to add the draw-bead; and the other is to modify the tool shape such as the forming shape at the wall. Simulation results show that the proposed guidelines both guarantee the improved feeling quality.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.564-571
• /
• 2007

In the present study, stern form optimization has been carried out using computational fluid dynamics (CFD) techniques. The viscous pressure drag has been minimized to optimize stern shape. Parametric modification function has been used to modify the shape of the hull. By the use of the parametric modification function and algebraic scheme to grid manipulation, the initial ship geometry was easily deformed according to change of design parameters. For purpose of illustration, KRISO 319K VLCC (KVLCC) is chosen for example ship to demonstrate stern form optimization. The numerical results indicate that the optimized hull yields a reduction in viscous resistance.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.4
• /
• pp.269-279
• /
• 2002

Geometric shape morphing is an interesting geometric operation that interpolates two geometric shapes to generate in-betweens. It is well known that Minkowski operations can be used to test and build collision-free motion paths and to modify shapes in digital image processing. In this paper, we present a new geometric modeling technique to control the morphing on geometric shapes based on Minkowski sum. The basic idea develops from the linear interpolation on two geometric shapes where the traditional algebraic sum is replaced by Minkowski sum. We extend this scheme into a Bezier-like control structure with multiple control shapes, which enables the interactive control over the intermediate shapes during the morphing sequence as in the traditional CAGD curve/surface editing. Moreover, we apply the theory of blossoming to our control structure, whereby our control structure becomes even more flexible and general. In this paper, we present mathematical models of control structure, their properties, and computational issues with examples.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.53-61
• /
• 1999

STL has several errors such as orientation error, hole error, and acute triangle error on being translated from CAD software. These errors should be corrected before using in Rapid Prototyping. So the software is necessary to correct errors. In this study, STL Editor which is a system for STL error correction and shape modification is developed and contains following characteristics. 1.Apply the triangle based data st겨cture. 2.Use the graphic user interface for easy work. 3.Use the Diet method to reduce data size. 4.Use the Delaunay triangulation method to enhance the quality of STL. 5.Modify the STL errors manually.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.48-54
• /
• 2007

Hand shape is one of important elements in Korean Sign Language (KSL), which is a communication method for the deaf. To express sign motion in a virtual reality environment based on OpenGL, we need an editor which can insert and modify sign motion data. However, it is very difficult that people, who lack knowledge of sign 1anguage, exactly edit and express hand shape using the existing editors. We also need a program to efficiently construct and store the hand shape data because the number of data is very large in a sign word dictionary. In this paper we developed a KSL hand shape editor to easily construct and edit hand shape by a graphical user interface (GUI), and to store it in a database. Hand shape codes are used in a sign word editor to synthesize sign motion and decreases total amount of KSL data.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.589-594
• /
• 2002

In computer graphics, L-system is primarily used for the production of such natural shapes as flowers, trees, and grass. It is possible by iteratively applying the theory of multiple-reduction-copy-machine to an arbitrary initial shape. The purpose of this paper is to modify the shape of ordinary L-system trees so that more realistic trees can be generated. Instead of applying simple iterative function system of the L-system, we regard each branch of the trees as a living thing, and endow them with corresponding attributes. Such branch attributes as lifetime, growth speed, shape variation, attraction by environment are known to belong to the attributes of the particle system. We presented modeling methods as hypotheses for each of the attributes based on parameters, iud shown the resulting diverse tree shapes.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.217-225
• /
• 2021

In this study, wave spectrum data were calculated using the water surface elevation data observed at 5Hz intervals from the HeMOSU-2 meteorological tower installed on the west coast of Korea, and wave parameters were estimated using wave spectrum data. For all significant wave height ranges, the peak enhancement parameter (γ_opt) of the JONSWAP spectrum and the scale parameter (α) and shape parameter (β) of the modify BM spectrum were estimated based on the observed spectrum, and the distribution of each parameter was confirmed. As a result of the analysis, the peak enhancement parameter (γ_opt) of the JONSWAP spectrum was calculated to be 1.27, which is very low compared to the previously proposed 3.3. And in the range of all significant wave heights, the distribution of the peak enhancement parameter (γ_opt) was shown as a combined distribution of probability mass function (PMF) and probability density function (PDF). In addition, the scale parameter (α) and shape parameter (β) of the modify BM spectrum were estimated to be [0.245, -1.278], which are lower than the existing [0.300, -1.098], and the result of the linear correlation analysis between the two parameters was β = -3.86α.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.5
• /
• pp.542-550
• /
• 2007

A geometry modification is one of main keys in achieving a successful optimization. The optimized hull form generated from the geometry modification should be a realistic, faired form from the ship manufacturing point of view. This paper presents a practical hull optimization procedure using a parametric modification function. In the parametric modification function method, the initial ship geometry was easily deformed according to the variations of design parameters. For example, bulbous bow can be modified with several parameters such as bulb area, bulb length, bulb height etc. Design parameters are considered as design variables to modify hull form, which can reduce the number of design variables in optimization process and hence reduce its time cost. To verify the use of the parametric modification function, optimization for KCS was performed at its design speed (FN=0.26) and the wave making resistance is calculated using a well proven potential code with fully nonlinear free surface conditions. The design variables used are key design parameters such as Cp curve, section shape and bulb shape. This study shows that the hull form optimized by the parametric modification function brings 7.6% reduction in wave making resistance. In addition, for verification and comparison purpose, a direct geometry variation method using a bell-shape modification function is used. It is shown that the optimal hull form generated by the bell-shaped modification function is very similar to that produced by the parametric modification function. However, the total running time of the parametric optimization is six times shorter than that of the bell shape modification method, showing the effectiveness and practicalness from a designer point of view in ship yards.

• Phonetics and Speech Sciences
• /
• v.9 no.1
• /
• pp.49-53
• /
• 2017

Formant frequencies depend on the position of tongue, the shape of lips, and larynx. In the auditory system, the external ear canal is an open-end resonator, which can modify the voice characteristics. This study investigates the effect of the real ear on formant frequencies. Fifteen subjects ranging from 22 to 30 years of age participated in the study. This study employed three corner vowels: the low central vowel /a/, the high front vowel /i/, and the high back vowel /u/. For this study, the voice of a well-educated undergraduate who majored in speech-language pathology, was recorded with a high performance condenser microphone placed in the upper pinna and in the ear canal. Paired t-test showed that there were significant difference in the formant frequencies of F1, F2, F3, and F4 between the free field and the real ear. For /a/, all formant frequencies decreased significantly in the real ear. For /i/, F2 increased and F3 and F4 decreased. For /u/, F1 and F2 increased, but F3 and F4 decreased. It seems that these voice modifications in the real ear contribute to interpreting voice quality and understanding speech, timbre, and individual characteristics, which are influenced by the shape of the outer ear and external ear canal in such a way that formant frequencies become centralized in the vowel space.

• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.23-30
• /
• 2001

Among the various welding conditions, the welding current that is inversely proportional to the tip-to-work-piece distance is an essential parameter as to monitor the GMAW process and to implement the welding automation. Considering the weld pool surface geometry including weld defects, it should modify the signal processing method for automatic seam tracking in horizontal fillet welding. To meet the above necessities, a mathematical model related with the weld pool geometry was proposed as in a conjunction with the two-dimensional heat flow analysis of the horizontal fillet welding. The signal processing method based on the artificial neural network (Adaptive Resonance Theory) was proposed for discriminating the sound weld pool surface from that with the weld defects. The reliability of the numerical model and the signal processing method proposed were evaluated through the experiments of which showed that they are effective for predicting the weld bead shape with or without the weld defects in a horizontal fillet welding.