• The Korean Journal of Zoology
• /
• v.8 no.1
• /
• pp.1-7
• /
• 1965

The short-necked clam is distributed widely in Korean tidal flats and it is a much an important bivalve quantitatively as to control the production of the tidal flat. The shell of this clam tends to show remarkable morphological variations depending on the habitat. Under a seemingly favorable condition for the growth , the color pattern of shell of the clam is clear and obvious and having less weight and elongated shape, the ratios of shell length to both height and width are small . On the contrary , when the environment appears to be an unfavorable one, the shell is found to be heavy and stunted with smudgy color pattern. If this correlation between could be a basis for the judgement in suitability of growth environment for the clam. In the Ikawazu Bay, Japan, it is revealed that the elongated shell is produced from the coast outside of the Bay (1) , the stunted from the esturay (2) and the intermediate from the floodgate area (3) and the middle of the Bay (4). Followings are the results obtained from the morphological investigation of the claim in this Bay. 1. Relationship between the shell length and the largest shell rib length is linear and between the shell length and the shell width is also linear but with a critical point at the shell length of 17-20 mm. The ratio between the width and the largest rib length at a given shell length increases with the order of 1, 3, 4, and 2. 2. A gradual decreases of the ratio of the shell length to the largest rib length is observed when the former is less than 17-18 mm, and this ratio increases with the shell of longer. Also there is a different range of this ratio in each different location ; the greatest range in 2, the smallest in 1 and 4 being in between. 3. A similar biometric finding is apparent with the ratio between the length and width of the shell and the order in value is 2, 4, 1 and 3. 4. The ratios between the length and the largest rib length of elongated and stunted shell are 0.84-0.86 and 0.89-0.92, respectively , and those between the length and width are 0.40-0.51 and 0.49-0.58, respectively. 5. Generally , the elongated short necked clam shells are products of the tidal flat of good circulation of sea water with high salinity and smaller fluctuations of salinity and temperature within a day. The stunted shells are produced for tidal flats of opposite of above conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.5
• /
• pp.182-187
• /
• 2015

The growth and characterization of micro sized AlGaN array structures selectively grown by metal organic chemical vapor deposition (MOCVD) on GaN stripes are reported. The shape of the AlGaN array structures depends on the size of exposed area for selective growth. The AlGaN array structures grown selectively on relatively large exposed area have regular shapes resembling those of the GaN stripes on the substrate, while samples selectively grown on relatively small exposed area have irregular shapes. The phonon frequency of the AlGaN array structures increases with increasing Al composition in the AlGaN structure. However, at relatively high Al composition (x = 0.28 in this research), the phonon frequency decreases slightly from the expected value not only because of large tensile strain associated with large differences between the lattice constants of the AlGaN structure and underlying GaN stripes but also changes of crystal facet direction during the selective growth.

• Clean Technology
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2008

Removal of paraffin wax from a ceramic injection mold using supercritical $CO_2$ has been studied. The paraffin wax is used as a binder in the ceramic injection molding process. The effects of pressure, temperature and flow rate of supercritical $CO_2$ on the removal of the paraffin wax were investigated. The removal rates were measured with various flow rates of $CO_2$ in the range of 328.15 - 348.15 K and 15 - 30 MPa. The removal rate of paraffin wax increased as the pressure increased. In the effect of temperature, the paraffin wax was effectively removed over 329.15K (melting point of paraffin wax), however, the efffct of temperature was not significant when the temperature was further increased. The increase of $CO_2$ flow rate also affected the removal of paraffin wax. However, the effect of flow rate was not observed when the flow rate reached a certain value. Propane was used as a co solvent in order to remove the paraffin wax effectively. When the propane was added to the $CO_2$, the removal efficiency was improved. The paraffin wax was completely removed from the ceramic injection mold without any change in their shape and the structure.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.559-563
• /
• 2015

Monitor of All-sky X-ray Image (MAXI) is a Japanese X-ray all-sky surveyer mounted on the International Space Station (ISS). It has been scanning the whole sky since 2009 during every 92-minute ISS rotation. X-ray transients are quickly found by the real-time nova-search program. As a result, MAXI has issued 133 Astronomer's Telegrams and 44 Gamma-ray burst Coordinated Networks so far. MAXI has discovered six new black holes (BH) in 4.5 years. Long-term behaviors of the MAXI BHs can be classified into two types by their outbursts; a fast-rise exponential-decay type and a fast-rise flat-top one. The slit camera is suitable for accumulating data over a long time. MAXI issued a 37-month catalog containing 500 sources above a ~0.6 mCrab detection limit at 4-10 keV in the region ${\mid}{b}{\mid}$ > $10^{\circ}$. The SSC instrument utilizing an X-ray CCD has detected diffuse soft X-rays extending over a large solid angle, such as the Cygnus super bubble. MAXI/SSC has also detcted a Ne emission line from the rapid soft X-ray nova MAXI J0158-744. The overall shapes of outbursts in Be X-ray binaries (BeXRB) are precisely observed with MAXI/GSC. BeXRB have two kinds of outbursts, a normal outburst and a giant one. The peak dates of the subsequent giant outbursts of A0535+26 repeated with a different period than the orbital one. The Be stellar disk is considered to either have a precession motion or a distorted shape. The long-term behaviors of low-mass X-ray binaries (LMXB) containing weakly magnetized neutron stars are investigated. Transient LMXBs (Aql X-1 and 4U 1608-52) repeated outbursts every 200-1000 days, which is understood by the limit-cycle of hydrogen ionization states in the outer accretion disk. A third state (very dim state) in Aql X-1 and 4U 1608-52 was interpreted as the propeller effect in the unified picture of LMXB. Cir X-1 is a peculiar source in the sense that its long-term behavior is not like typical LMXBs. The luminosity sometimes decreases suddenly at periastron. It might be explained by the stripping of the outer accretion disk by a clumpy stellar wind. MAXI observed 64 large flares from 22 active stars (RS CVns, dMe stars, Argol types, young stellar objects) over 4 years. The total energies are $10^{34}-10^{36}$ erg $s^{-1}$. Since MAXI can measure the spectrum (temperature and emission measure), we can estimate the size of the plasma and the magnetic fields. The size sometimes exceeds the size of the star. The magnetic field is in the range of 10-100 gauss, which is a typical value for solar flares.

• Journal of the Korean Magnetics Society
• /
• v.18 no.6
• /
• pp.232-236
• /
• 2008

Dependence of interlayer exchange coupling on antiferromagnetic IrMn thickness, thermal stability, and parallel anisotropy angle in perpendicular anisotropy [CoFe/Pt/CoFe]/IrMn multilayers was investigated. The magnetic property of [CoFe($10{\AA}$)/Pt($8{\AA}$)/CoFe($10{\AA}$)] induced by antiferromagnetic ordering of IrMn layer was maintained a stable perpendicular anisotropy up to $250^{\circ}C$ and from $7{\AA}$ to $160{\AA}$ of IrMn thickness. The value of interlayer exchange coupling of [CoFe/Pt/CoFe]/IrMn multilayers with perpendicular anisotropy increased to 1.5 times at anisotropy angle of $60^{\circ}$ more than of $0^{\circ}$. On the other side, the interlayer exchange coupling at anisotropy angle of $90^{\circ}$ was $\infty$ Oe, it was likely diverted to a parallel shape magnetization.

• Sijohaknonchong
• /
• v.19 no.1
• /
• pp.85-106
• /
• 2003

Recently, the sonnet and the shijo, each representing French and Korean formal poetries, are tend to be read with the eyes only, as were more accustomed to written literature. But even after almost three millennia of written literature and increased use of digitalized poems, poetry retains its appeal to the ear as well as to the eye. To read a poem only by eyes might be wrong because it is designed to be read aloud by mouth and understood by ear, and will decrease the aesthetic sense otherwise. It is essential to find the right way to recite a poem in this dramatically changed society, and is especially important when many shijos are changing into digitalized forms to adapt the new wave of our society. The sonnet and the shijo emphasize the importance of the harmony of sounds and rhythms with certain structure, and have their own prosodies. The emotions of the speaker in poems are expressed with words. When they are pronounced. each phoneme has its own phonemic characteristics. When comparing the The Broken Bell(Baudelaire) and Chopoong ga (Jong Seo Kim) in terms of prosody and phonetics. the speakers emotions are closely related with the phonetic structure of each word. In The Broken Bell, the phonetic value of rhymes, repeated phonemes, concentration of front and back vowels. rhythms of onesyllable words shape the overall image of this poem describing the productivity of bells as appose to the sterility of the soul. Chopoong ga also shows the determined and strong will of the speaker by frequent glottalized sounds. distribution and concentration of certain vowels. and frequent use of plosives. As you see in these examples, phones, beats, and rhythms are not the mere transmitter of meaning but possess their expressive values of their own and should be the first to be considered when reciting a poem.

• Korean Journal of Plant Taxonomy
• /
• v.48 no.3
• /
• pp.230-247
• /
• 2018

We conducted principal component analyses using the quantitative characteristics of the genus Sorbaria to investigate and explore morphological variation and diagnostic characteristics. The genus Sorbaria was divided into two groups based on erect or pendulous inflorescence, the existence of hairs on the ovary and follicle surfaces, the number of stamens, and the shape of the sepal. As a result of our investigation and of a morphometric analysis, these two groups could be also classified using quantitative characteristics, in this case the number of leaflets, the size of the leaflets, the width of the inflorescence, the size of the sepal, the petal, and the follicles and seeds. In the Sorbifolia group (S. grandiflora and S. sorbifolia complex), the size of lateral leaflets, number of veins, gland and stellate density on the abaxial surface of leaflets, and the petal and follicle size were found to be useful identification characteristics. The terminal and lateral leaflet size and the gland and stellate density on the abaxial surface of the leaflets were found to be characters of taxonomic value for the Kirilowii group (S. arborea complex, S. kirilowii, and S. tomentosa complex). The results of the numerical analysis conducted here can provide valuable information to those reconsidering and delimiting a taxonomic revision of the genus Sorbaria.

• The Korean Journal of Physiology
• /
• v.14 no.2
• /
• pp.7-16
• /
• 1980

The effects of various inotropic interventions on the shape of the steady state length tension relation and the length-dependent activation process in cardiac muscle were studied. The influence of inotropic interventions upon the action potential was also observed. The range of varying muscle length was from the optimal length$(l_{max})$, where the active tension production is maximal, to 0.85 $l_{max}$. Changes in stimulus frequency or in external bathing Ca concentration constituted the inotropic interventions in this experiment. The papillary muscles were isolated from the rabbit right ventricles and perfused with $HCO-_3\;-buffered$ normal Tyrode solution which was aerated with $3%\;CO_2-97%\;O_2$ mixed gas and kept at $35^{\circ}C$. Resting Passive tension at $l_{max}$ was approximately 30% of the total tension and appeared from the muscle length of 0.90 $l_{max}$. The effect of stimulus frequency on the steady state level of developed tension was: As the stimulus frequency was increased from 0.1 to 0.5 Hz, there was little change in developed tension. As the frequency was increased further, to a value of about 3 Hz, tension increased steeply. Further increase of the frequency to 5 Hz had little additional effect on the developed tension. The length-tension curves for isometric peak tension became more steeper with the degree of potentiation by inotropic interventions. The relative steepness of the normalized length-tension curves where tension production was expressed as a percentage of maximal tension developed at $l_{max}$, varied inversely with the level of inotropic state and these curves were not superimposable one another. Thus at the stimulus frequency of 2 Hz or at the external Ca concentration of 8 mM, the relative decline in the developed tension for a given change in muscle length was considerably less than the decline observed at the frequency of 0.5 Hz or at the concentration of 2 mM Ca. Action potential duration was prolonged significantly as the frequency increased from 0.2 to 2 Hz, and this change in action potential duration was not observable on the changes in muscle length. There was a tendency of the hyperpolarization of membrane potential when the muscle length was shortened from $l_{max}$ to 0.95 $l_{max}$. These results support the hypothesis that there is a length-dependence of the activation process.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.136-142
• /
• 1997

An/n-GaAs(100) Schottky barrier diode has been investigated by using electoreflectance(ER). From the observed Franz-Keldysh oscillatins(FKO), the internal electric field(Ei) of the sample is $5.76\times 10^{4}$V/cm at 300 K. As the modulation voltage($V_{ac}$) IS changed, the line shape of ER signal does not change but its amplitude various linerly. For increasing forward and reverse dc bias boltage($V_{bias}$), the amplitude of ER signal decreases. The internal electric field decreased from $19.3\times 10^4\sim4.39\times10^4$V/cm as $V_{bias}$ INCREASES FROM -5.0 V TO 0.6 V. For Au/n-GaAs the valve of built-in voltage($V_{bi}$) determined from the plot of $V_{bias}$ versus $E_i^2$ is 0.70 V. This value agrees with that observed in the plot of $V_{bias}$ versus amplitude of FKO peak. In addition, the carrier concentraion(N) and potential barrier($\Phi$) of the sample at 300 K are found to be about $2.4\times 10^{16}\textrm{cm}^{-3}$ and 0.78 eV, respectively.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.4
• /
• pp.11-19
• /
• 2017

We propose a new pipeline of fluid surface reconstruction that incorporates hybrid SDF(signed distance fields) and adaptive fluid surface techniques to finely reconstruct liquid-solid mixed surfaces. Previous particle-based fluid simulation suffer from a noisy surface problem when the particles are distributed irregularly. If a smoothing scheme is applied to reduce the problem, sharp and detailed features can be lost by over-smoothing artifacts. Our method constructs a hybrid SDF by combining signed distance values from the solid and liquid parts of the object. We also proposed a method of adaptively reconstructing the surface of the fluid to further improve the overall efficiency. This not only shows the detailed surface of the solid and liquid parts, but also the detail of the solid surface and the smooth fluid surface when both materials are mixed. We introduce the concept of guiding shape and propose a method to get signed distance value quickly. In addition, the hybrid SDF and mesh reconstruction techniques are integrated in the adaptive framework. As a result, our method improves the overall efficiency of the pipeline to restore fluid surfaces.