• Structural Monitoring and Maintenance
• /
• 제4권2호
• /
• pp.153-173
• /
• 2017

An improved method is presented to estimate the axial force of a bar member with vibrational measurements based on modified Timoshenko beam theory. Bending stiffness effects, rotational inertia, shear deformation, rotational inertia caused by shear deformation are all taken into account. Axial forces are estimated with certain natural frequency and corresponding mode shape, which are acquired from dynamic tests with five accelerometers. In the paper, modified Timoshenko beam theory is first presented with the inclusion of axial force and rotational inertia effects. Consistent mass and stiffness matrices for the modified Timoshenko beam theory are derived and then used in finite element simulations to investigate force identification accuracy under different boundary conditions and the influence of critical axial force ratio. The deformation coefficient which accounts for rotational inertia effects of the shearing deformation is discussed, and the relationship between the changing wave speed and the frequency is comprehensively examined to improve accuracy of the deformation coefficient. Finally, dynamic tests are conducted in our laboratory to identify progressive axial forces of a steel plate and a truss structure respectively. And the axial forces identified by the proposed method are in good agreement with the forces measured by FBG sensors and strain gauges. A significant advantage of this axial force identification method is that no assumption on boundary conditions is needed and excellent force identification accuracy can be achieved.

• 한국터널지하공간학회 논문집
• /
• 제17권3호
• /
• pp.227-236
• /
• 2015

양호한 암반조건이나 균질한 점토지반 등 불투수성 지반의 경우에도 불연속면에 의하여 수압이 작용될 수 있으므로, 설계시 지반조건에 상관없이 수압조건을 고려하고 있다. 그러나, 세그먼트 라이닝의 형상이 원형임에 따라 수압을 고려하는 경우가 오히려 라이닝에 발생되는 부재력을 감소시킬 수가 있으므로, 고수압 조건에서는 이에 대한 설계개념정립이 중요하다. 따라서, 본 논문에서는 고수압의 불투수성 지반조건에서 하중조건 및 하중조합에 따른 부재력 크기 등을 비교함으로서, 세그먼트 라이닝 설계시 합리적이고 적절한 설계개념에 대하여 서술하였다.

• 한국항공우주학회지
• /
• 제44권11호
• /
• pp.941-948
• /
• 2016

직물 복합재료는 높은 비강성과 비강도를 가지며 일방향 복합재료에 비해 면외 방향 특성과 충격 및 층간분리에 대한 특성이 우수하여 항공우주 구조물의 주재료로 적용되고 있다. 본 논문에서는 2차원 평직 복합재료의 반복단위격자에 대한 기하학적 모델을 정의하고 유효강성을 예측하였다. 반복단위격자의 기하학적 형상은 다양한 프리폼 제작변수에 의해 결정될 수 있으며, Naik의 모델을 바탕으로 섬유다발간의 간극을 추가적으로 고려하는 수정된 기하학적 모델을 제시하였다. 평직 복합재료의 유효 강성은 반복단위격자에 대한 섬유다발 이산화 기법과 등변형률 가정 기반의 응력 평균화 기법을 사용하여 예측되었다. 또한 섬유다발간의 간극의 크기에 따른 강성의 변화를 평가하였으며, 기존 모델과 시편 시험 데이터와의 비교를 통해 강성 예측 결과를 검증하였다.

• Ocean and Polar Research
• /
• 제36권4호
• /
• pp.373-381
• /
• 2014

Korea contract Mn-nodule field in the NE equatorial Pacific is composed of seven sectors with average water depths of 4,513-5,025 m. Of the various factors controlling the properties of Mn-nodule, it seems that water depth is likely connected to the chemical composition and occurrence of nodules. To test whether such an assumption held in each sector, we reviewed previous research data accumulated since 1994 for one of the northern sectors (hereafter KR1) where there are stark contrasts in water depth. High-resolution seabed mapping clearly separates a northern part (KR1N) from a deeper southern part (KR1S), cutting across in the middle of the KR1. In addition, significant volcanic activities forming numerous seamounts are distinctive especially in KR1N. In terms of nodule occurrence, manganese nodules in KR1S are comparatively larger (2-4 cm) with a discoidal shape, while those in KR1N are generally small (<2 cm) with poly-lobate and irregular shapes. Nodules in KR1N also have lower Co, Cu, Mn and Ni, and higher Fe contents. The spatial separation in nodule characteristics might be caused by volcanic activities in KR1N rather than water depth contrast. During the formation of the seamounts in KR1N, rock fragments and volcanic ashes as new nuclei of the nodules would have been continuously generated. As a result, the nodules could not grow larger than 2 cm and display the shapes of a newbie (i.e., irregular and poly-lobate shapes). Moreover, significant Fe supply from volcanic activities probably decreases the Mn/Fe ratio, which may lead to the KR1 nodules being misinterpreted as a hydrogenic in origin compared to other sectors where a high Mn/Fe ratio is present.

• 한국한의학연구원논문집
• /
• 제18권3호
• /
• pp.133-139
• /
• 2012

Objective : UMLS is 'Ontology' which establishes the database for medical terminology by gathering various medical vocabularies representing same fundamental concepts. Method : Although Chinese character are represented in the Chinese part of Korean Unicode system in a computer, writing of Chinese characters is vary depending on Chinese input systems and Chinese writers' levels of knowledge. As the result of this, representation of Chinese writing in a computer will be considerably different from an old Chinese document. Therefore, a meaningful relationship between digital Chinese terminology and translated Korean is necessary in order to build Ontology for Chinese medical terms from Oriental medical prescription in a computer system. Result : This research will present 1:1 mapping information among the Chinese characters used in the Oriental medical prescription with analysis of 'same character different sound' and 'same meaning different shape' in Chinese part of Unicode systems. Conclusions : Furthermore, the research will provide top-down menu of relationship between Chinese term and Korean term in medical prescription with assumption of that the Oriental medical prescription has its own unique meaning.

• Journal of Ship and Ocean Technology
• /
• 제1권1호
• /
• pp.35-47
• /
• 1997

The consequences associated with ships running aground depend very much on the soil characteristics of the sea bed and the geometrical shape of the ship bow. The penetration into the sea bed depends on these factors and the penetration is an important factor for the ship motion because it influences the ship heave and pitch motions as well as the friction between the ship and the soil. In this paper a rational calculation model is presented for the sea bed soil reaction forces on the ship bottom. The model is based on the assumption that the penetration of the ship bow generates a flow of pore water through the grain skeleton of the soil. The flow is governed by Darcy\`s law and it is driven by the pressure of the pore water at the bow. In addition to this pore water pressure, the bow is subjected to the effective stresses in the grain skeleton at the bow surface. These stresses are determined by the theory of frictional soils in rupture. Frictional stresses on the bow surface are assumed to be related to the normal pressure by a simple Coulomb relation. The total soil reaction as a function of velocity and penetration is found by integration of normal pressure and frictional stresses over the surface of the bow. The analysis procedure is implemented in a computer program for time domain rigid body analysis of ships running aground and it is verified in the paper through a comparison of calculated stopping lengths, effective coefficients of friction, and sea bed penetrations with corresponding experimental results obtained by model tests as well as large, scale tests.

• International Journal of Reliability and Applications
• /
• 제7권1호
• /
• pp.27-39
• /
• 2006

Many real world cases in material failure analysis do not follow perfectly the normal distribution. Forcing of the normality assumption may lead to inaccurate predictions and poor product quality. We examine the failure process of the internal bond (IB or tensile strength) of medium density fiberboard (MDF). We propose a forced censoring technique that closer fits the lower tails of strength distributions and better estimates extremely smaller percentiles, which may be valuable to continuous quality improvement initiatives. Further analyses are performed to build an accelerated common-shaped Weibull model for different product types using the $JMP^{(R)}$ Survival and Reliability platform. In this paper, a forced censoring technique is implemented for the first time as a software module, using $JMP^{(R)}$ Scripting Language (JSL) to expedite data processing, which is crucial for real-time manufacturing settings. Also, we use JSL to automate the task of fitting an accelerated Weibull model and testing model homogeneity in the shape parameter. Finally, a package script is written to readily provide field engineers customized reporting for model visualization, parameter estimation, and percentile forecasting. Our approach may be more accurate for product conformance evaluation, plus help reduce the cost of destructive testing and data management due to reduced frequency of testing. It may also be valuable for preventing field failure and improved product safety even when destructive testing is not reduced by yielding higher precision intervals at the same confidence level.

• 한국융합학회논문지
• /
• 제11권7호
• /
• pp.193-206
• /
• 2020

최근 라이프 스타일의 변화에도 불구하고 서점이라는 콘텐츠는 그 양태를 바꾸면서 꾸준히 우리 곁을 지키고 있다. 본고는 이런 환경에서 개인의 혁신성이 복합서점의 서비스 디자인 요인과 구전 의도에 미치는 영향을 정량적으로 실증한 연구이다. 연구자들은 개인의 혁신성이 복합서점의 서비스 디자인 요인에 영향을 줄 것으로 보았다. 또한 선행연구를 통하여 추론한 복합서점의 서비스 디자인 요인 상호간에도 상당한 인과관계가 있을 것으로 가정하였다. 나아가 매개변인으로서 이들이 내부변인인 지각된 용이성과 지각된 유용성 및 만족, 구전 의도에 영향을 줄 것이라는 가설을 제시하였고, 확장된 기술수용모델과 후기수용모델의 통합모델을 이용하여 검증하였다. 연구자들은 본 연구가 대형 유통시설 내 주요 테넌트로 주목받는 복합서점에 대하여 개발자의 입장으로 접근한 연구라는 점에서 상당한 기여가 있을 것으로 기대한다.

• 대한토목학회논문집
• /
• 제13권5호
• /
• pp.39-52
• /
• 1993

비대칭단면(非對稱斷面)을 갖는 박벽공간(薄壁空間)뼈대와 원형(圓形)아아치의 휨-비틂 좌굴해석(挫屈解析)을 수행하기 위하여, 가상(假想)일의 원리(原理)를 이용한 공간(空間)뼈대요소(要素)의 접선강도(接線剛度)매트릭스가 유도(誘導)된다. 양단(兩端) 구속(狗束)된 비틂을 무시(無視)하는 경우와 구속(狗束)된 비틂을 고려(考慮)하는 경우 각각에 대하여 semitangential rotation and moment에 대응(對應)하는 박벽공간(薄壁空間) 뼈대요소(要素)의 탄성(彈性) 및 기하적(幾何的)인 강도(剛度)매트릭스를 산정한다. 이 때, 휨을 받는 평면(平面)보의 처짐함수를 공간(空間) 뼈대요소(要素)의 축방향(軸方向) 및 횡방향(橫方向) 처짐과 비틂회전각에 대한 형상함수(形狀函數)로 사용한다. 순수휨과 균일한 압축력을 받는 도형(圖形)아아치의 횡좌굴문제(橫挫屈問題)를 해석(解析)하여 본(本) 연구(硏究)에 의한 해석결과(解析結果)과 문헌(文獻)의 엄밀해(嚴密解)에 의한 결과들을 비교(比較), 분석(分析)하여 본(本) 연구(硏究)에서 제시한 이론(理論)의 정당성(正當性)을 입증(立證)한다.

• 한국지역사회생활과학회지
• /
• 제18권3호
• /
• pp.469-480
• /
• 2007

The purpose of this study is to find out the effect of nutrition education on dietaty behavior, nutrition knowledge and weight control of middle school students. The study is based on the assumption that students' dietary behavior, nutrition knowledge and weight-control are considerably influenced by whether they get nutrition education or not. A total of 495 students aged between $14{\sim}16$ (249 boys and 246 girls) were surveyed one middle school located Siheungsi, Gyeonggido. The survey reveals that 55.4% of the boy students and 63.0% of the girl students have been provided nutrition education in curriculum related to nutrition, for instance home economics, technology class, and/or some other classes. The results showed that the students who have been provided nutrition education don't skip breakfast and have three meals regularly(p<0.05). The score of dietary behavior is based on Mini-Dietary Assessment. The average score of the students who have been provided nutrition education is higher than the students who have never been provided nutrition education(p<0.01), meaning the nutrition education are affected positively on dietary behavior. The average score of students' knowledge of nutrition is as follows. The average score of the students who have been provided nutrition education is 5.0/10, while the average score of the students who have never been provided nutrition education is 3.9/10. The gap of the average score does come up to an inevitable conclusion that the students who have been provided nutrition education are supposed to get higher score than those who have never been provided nutrition education(p<0.0001). And the students who have been provided nutrition education are more satisfied with their body shape than those who have never been provided nutrition education(p<0.05).