Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집)

Korean Tunnelling and Underground Space Association (한국터널지하공간학회)
권호 표지
DOI QR코드

DOI QR Code

A study on the design of shield tunnel lining in high water pressure condition

고수압 조건에서 쉴드터널 세그먼트 라이닝 구조설계에 관한 연구

  • Received : 2015.04.01
  • Accepted : 2015.04.16
  • Published : 2015.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

In impermeable ground, water pressure is applied due to discontinuity such as joint or fissure. Therefore, water pressure should be considered in design regardless of ground condition. However, when the shape of segmental lining is circular, water pressure may reduce the lining member force, so it is important to define the assumption and the concept of design in case of high water pressure. This paper presents the concepts of design of the lining of shield tunnel at high water pressure and in impermeable ground condition. In addition, the member forces in various load conditions were compared in this study. (elastic equation, closed form solutions, beam-spring model).

양호한 암반조건이나 균질한 점토지반 등 불투수성 지반의 경우에도 불연속면에 의하여 수압이 작용될 수 있으므로, 설계시 지반조건에 상관없이 수압조건을 고려하고 있다. 그러나, 세그먼트 라이닝의 형상이 원형임에 따라 수압을 고려하는 경우가 오히려 라이닝에 발생되는 부재력을 감소시킬 수가 있으므로, 고수압 조건에서는 이에 대한 설계개념정립이 중요하다. 따라서, 본 논문에서는 고수압의 불투수성 지반조건에서 하중조건 및 하중조합에 따른 부재력 크기 등을 비교함으로서, 세그먼트 라이닝 설계시 합리적이고 적절한 설계개념에 대하여 서술하였다.

Keywords

References

  1. Asche, H.R., Ireland, T.J. (2013), "Segmental lining design for large-diameter road tunnels", In proceediings of Rapid Excavation and Tunneling Conference, pp. 866-877.
  2. Curtis, D.J. (1976), "Discussion on reference (1)", Geotechnique 26, pp. 231-237. https://doi.org/10.1680/geot.1976.26.1.231
  3. Duddeck, Erdmann. (1982), Structural design models for tunnels. Tunnelling '82.
  4. Hartmann, F. (1970), "Elastizitatstheorie des ausgekleideten kreisformigen tunnelhohlraumes und des dingebohrten kreisformigen rohres", Strasse Brucke Tunnel, Vol. 22, pp. 39-45, Issue 8, pp. 209-215, Issue 9, pp. 241-246, and Vol. 24 (1972), Issue 1, pp. 13-20, Issue 2, pp. 39-45.
  5. Hartmann, F. (1985), "Einfache berechnung uberschutteter, kreisformiger rohre von beliebiger steifigkeit, elastizitatstheorie des uberschutteten rohres", Bautechnik, Vol. 62, Issue 7, pp. 224-235.
  6. ITA, Working Group No. 2. (2000), Guidelines for the Design of Shield Tunnel Lining. Tunnelling and Underground Space Technology, 15 No. 3, pp. 303-331. https://doi.org/10.1016/S0886-7798(00)00058-4
  7. Japanese Society of Civil Engineers. (2006), Standard Specifications for Tunnelling.
  8. Japanese Society of Civil Engineers. (2010), Design of Shield Tunnel Lining.
  9. Terzaghi, K. (1943), "Theoretical soil mechanics", John Wiley and Sons, New York, pp. 66-76.

Cited by

  1. Development of optimized TBM segmental lining design system vol.18, pp.1, 2016, https://doi.org/10.9711/KTAJ.2016.18.1.013
  2. Performance-Based Evaluation of a Double-Deck Tunnel and Design Optimization vol.11, pp.1, 2019, https://doi.org/10.3390/su11010201