• 복식
• /
• 제57권4호
• /
• pp.9-17
• /
• 2007

Somatotype is human body shape and physique type which can be classified not only by the size, but also by the shape or posture of the body. Postural variations in the alignment of the back, shoulder, and neck can have an adverse effect on the fit of garments designed to hang from the shoulders. There have been some previous studies about the lateral upper torso by analyzing photographic measurements. In this study, 3D body scan images were used to classify the side somatotype of upper lateral method even though they are major data in the classification of upper torso. This study focused on following objective.; 1) To apply new and developing technology into the apparel industry analyzing 3D body scan images. 2) To classify upper laterla torso using the data through the new improver technology, 3D body scanner. 3) To propose basic materials for well fitted garments for each type of figure. The test subjects for this study were two hundreds nine female aged 19 years and up who were recruited in Cornell university body scan research team. Seventeen Variables(12 angles, 5 lengths) out of 3D body scan data were measured based on these landmarks and applied to analyze. The result of factor analysis indicated that 6 factors were extracted through factor analysis and orthogonal rotation by the method of Varimax and those factors comprise 62.5% of total variance. And the somatotype of upper body is classified into 3 types of figures according to cluster analysis; Bent forward posture, Straight posture, Swayback posture. Future study could be addressed about the somatotype of body by the age group based on the large database with wide variety of age.

• 한국광학회지
• /
• 제8권3호
• /
• pp.230-235
• /
• 1997

광섬유의 단면을 적절한 곡률의 곡면으로 가공함으로써 종래 구조에 비해 우수한 특성의 광섬유 Fabry-Peror(FP)간섭 필터를 제작할 수 있음을 이론적으로 분석하였다. 광섬유 단면의 가공된 오목거울의 곡률은 계단형 단일모드 광섬유의 도파모드를 Gaussian빔으로 가정했을 때 광섬유에서 나와 일정거리의 자유공간을 진행한 빔의 파면의 곡률과 일치하여야 하며, 이때 거울의 기울기 0.2.deg., 곡률오차 70.mu.m, 공극거리 오차 8.mu.m, 광축의 횡편차 0.5.mu.m이내의 범위에서 이상적인 배치를 벗어난 경우에도 광섬유간의 거리가 15.mu.m일 때 0.5%이하의 결합손실을 가져 종래에 비해 훨씬 간단한 새로운 구조의 광섬유 FP필터가 제작될 수 있음을 확인하였다. 마지막으로 곡면가공된 광섬유 단면의 간섭파형을 통하여 광섬유 단면을 의도된 구조로 가공할 수 있음을 보였다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권1호
• /
• pp.22-33
• /
• 2005

본 논문에서는 얼굴 형태와 유사한 타원체형 모델의 가변적 블록크기를 기반으로 하는 영상정렬 알고리즘을 제안한다. 블록정합 수행 시 좌우 곡률만을 고려한 기존의 실린더형 원형모델 방법은 좌우 영상에 대하여 정확한 정렬을 수행하지만 상하 영상에 대해서는 사람의 두상모양이나 턱 구조의 특징을 반영하지 않았기 때문에 정렬오류가 발생한다. 본 논문에서 제안한 알고리즘은 타원체형 얼굴 모델의 상하 좌우의 곡률에 따라 가변적인 블록크기를 사용하는 블록정합 알고리즘으로서 영상의 상관관계를 이용하여 정확한 정렬을 할 수 있다. 그리고 정렬된 영상으로부터 얼굴 텍스쳐 영상을 생성하기 위하여 영상 모자익 기법을 사용한다. 이때 중첩된 영역에 따라 선형적인 가중치를 부여하여 영상을 스티칭하고 부분적으로 나타나는 고스트 효과를 제거함으로써 더 실감 있는 텍스쳐를 생성한다.

• 대한방사선치료학회지
• /
• 제29권2호
• /
• pp.109-117
• /
• 2017

목 적: 두경부 환자가 입체적 세기변조 회전 방사선치료 시 변화하는 체형과 환자 정열 상태를 조사하고 그에 따라 치료 시 발생하는 선량분포의 변화와 적절한 재 CT 모의치료의 필요성을 평가하고자 한다. 대상 및 방법: 근치적 목적으로 방사선 치료를 시행한 두경부암 89명에 대해 입체적 세기변조 방사선치료계획을 수립하고 치료 기간 동안의 체중을 측정하였다. 그 중 10명의 환자에 대하여 체형변화를 평가하였다. ARIA software(Offline review)를 이용하여 ramus, chin, posterior neck, clavicle 등의 landmark를 지정한 후 skin까지의 거리를 측정하여 차이를 분석하였다. 결 과: 남성 60명을 대상으로 치료시행 $17{\pm}4$회에서 re-CT 모의치료를 시행한 결과 체중 감소율이 $-6.47{\pm}3.5%$로 나타났으며, 여성 29명은 경우는 $17{\pm}5$회에서 체중 감소율이 $-5.73{\pm}2.7%$로 나타났다. 피부위축(Skin shrinkage) 변화를 관찰한 결과 대표 landmark에서의 표준편차는 C1(${\pm}0.44cm$), C3(${\pm}0.83cm$), C5(${\pm}1.35cm$)로서 0.5 kg 감소 당 약 1 mm shrinkage 발생함을 알 수 있었다. 치료 횟수에 따른 피부위축은 1~4 fx (변화 없음), 5~13 fx (-2 mm), 14~22 fx(-4 mm), 23~30 fx(-6 mm)로 나타났다. 결 론: 체형이 약 5 mm 변화하게 되면 중심부 선량은 약 3 % 이상 차이나기 시작하게 되므로 적응증치료에 필요한 CT 모의치료를 추가로 진행하여야만 한다. 또한 적극적으로 lower neck의 CT 모의치료 방법 및 set up 방법에 관하여 연구하고 새로운 고정용구(Immobilization device)의 사용도 검토할 필요가 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.881-887
• /
• 2005

A total knee replacement is an extremely 'position-sensitive' operation; a malposition or a malalignment of the components will lead to a breakage of the component, a fracture around the knee prosthesis, and the limitation of range of the motion, etc. In a conventional total knee replacement, surgeons have to select an appropriate prosthesis according to the shape of the surgical region. A wrong selection may give rise to side effects or to need re-operation. Nevertheless, it is so difficult to choose the most proper prosthesis out of various kinds of prosthesis. This paper presents a surgical planning system for the total knee replacement with an operation simulating method in order to determine the parameters for the total knee replacement operation. We select an alignment axis and a resection angle as major operation parameters in the total knee replacement operation, and introduce the method to determine the major operation parameters with the operation simulator we developed. The simulator is used to determine operation parameters for optimized operations, to select the most appropriate prosthesis, and to analyze the prospective problems of the operation.

• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.667-671
• /
• 2010

The study was aimed at developing a power transmission coupling that is possible to transfer power without any trouble even if the two rotating shafts are making minute misalignment. The coupling that has been developed is Flange Flexible Urethane-key Coupling that connects two shafts by flanges with Urethane-key. A model coupling for use in transmitting power of 10hp was made and undergone performance evaluation and tests. Property and usefulness was proved through the test. The performance evaluation has demonstrated a property of $11.25Kgf{\cdot}m$ of allowable torque and 28.25hp of power at 1,80Orpm, which was found to be superior compared to the performance of similar couplings. Based on the performance test, study was made also for improving the shape of the Urethane-key and was successful to make the flange in smaller outside diameter. Further application test at site has proved that the product is easy to install and maintain, and has property of absorbing minute misalignment between two shafts and vibration caused there from.

• 지질공학
• /
• 제17권1호
• /
• pp.115-123
• /
• 2007

최근 들어 인구증가와 경제발전에 따른 고속도로의 확장 또는 신설이 급증하고 있고 양호한 노선을 위해 터널 건설도 급속도로 증가하고 있다. 이와 더불어 터널 시공 중 붕괴가 발생할 수 있는 경우도 상대적으로 높아지고 있다. 특히, 도로의 양호한 선형 확보를 위하여 지반조건이 불량한 구간에서 터널 굴착이 증가하므로 적절한 보강공법의 적용 없이 굴착을 실시하는 경우에 붕락이 자주 발생하였다. 본 논문에서는 고속도로 터널 시공 중 보편적인 붕괴 사례를 조사함으로써 다른 지질조건에서의 붕괴원인과 형태 및 적용 보강공법에 대해 분석하고자 한다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.378-382
• /
• 1999

We evaluated the effect of joining process such as contact method, shape of joined area and pressure on the electrical property of Bi-2223 superconducting tape. It was observed that the current capacity was reduced at the transition area of the joined tape and was significantly dependent on the uniaxial pressure. The lap-joined tape, fabricated with a pressure of 1,000-1,600 MPa, show the highest value of current capacity(80-90%) of the tape itself. It is believed the highest value of current capacity results from improvement in core density, contacting area and grain alignment, etc. In addition, the irreversible strain( ${\varepsilon}$ irrev) for the joined tape· was measured to be 0.1%, smaller than that of enjoined tape( ${\varepsilon}$ irrev = 0.3%). The decrease in the strength and irreversible strain for joined tape is believed to be due to the irregular geometry/morphology of the transition area of the tape.

• 한국초전도ㆍ저온공학회논문지
• /
• 제1권2호
• /
• pp.1-7
• /
• 1999

we evaluated the effects of joining process such as contact method. shape of joined area and pressure on the electrical and mechanical properties of Bi-2223 superconducting tape, Specifically. the current capacity of the jointed tape was measured as a function of uniaxial pressure. and the thermal shock, bonding strength and the thermal of the tape were evaluated and correlated to the microstructural evolution. It was observed that the current capacity was significanrly dependent on the uniaxial pressure The jointed tape, fabricated with a pressure of 1,000-1,600 Mpa. showed the highest value of current capacity results from improvements in core density, contacting area and grain alignment, ect. In addition, the strength of jointed tape was measured to be 86 Mpa, which is about 88% of the unjoined ape's strength. The irreversible strain($\varepsilon$irrev) for the jointed tape was measured to be 0.1%, smaller than that of unjoined tape ($\varepsilon$irrev= 0.3%). The decrease in the strength and irreversible strain for jointed tape is believed to be due to the irregular geometry/morphology of the transition area of the tape.

• 천문학회보
• /
• 제38권1호
• /
• pp.72.2-72.2
• /
• 2013

An off-axis telescope has several advantages in optical performance comparing with a conventional on-axis telescope. However, in general, an off-axis telescope has a narrow field of view due to the linear astigmatism caused by the asymmetric structure. It was shown in the previous work that the linear astigmatism can be eliminated by properly configuring parameters in a confocal off-axis reflector system. Furthermore, the third order aberrations of a confocal off-axis telescope can be minimized by optimizing the shape of the mirrors. Despite many advantages, the confocal off-axis telescopes have been evaded because of difficulties of off-axis mirror fabrication, alignment process and unaccustomed off-axis baffle design. The baffle for the off-axis telescope should be designed considering that the effects of stray lights are different because of the asymmetry of off-axis system. In this poster, the design, manufacturing, and test for the baffle and housing of an off-axis telescope are presented.