• 제목/요약/키워드: Shandong, China

검색결과 290건 처리시간 0.026초

중국 태안시 다이웨구 학교급식소의 시설·기구·환경 위생관리 실태 (Status of Facilities, Equipment, and Environmental Hygiene Management of School Foodservices in Daiyue-district, Taian-city, China)

  • 정효하;문혜경
    • 급식외식위생학회지
    • /
    • 제2권2호
    • /
    • pp.59-66
    • /
    • 2021
  • The results of the inspection based on the sanitation checklist and the measurement of refrigerator/freezer temperature, illuminance, and ATP were conducted at 12 school foodservices in Daiyue-district, Taian-city, Shandong Province, China, at the same time, and the results were as follows. Five items of 'Use sterilized cutting boards', 'Use sterilized knives', 'Use worktable after sterilization', 'Use sink after sterilization', 'Sterilize the interior/exterior of the refrigerator regularly' in the checklist inspection were found not to be performed (0%). Two items of 'Disinfect hands after washing', 'Equipped with hand sterilizer' and 'Sterilize the kitchen areas regularly' were investigated as being performed only in one foodservice (8%). The average illuminance of the receiving stand were 373.08±106.35 Lux, 8% when the standard (540 Lux or higher) was complied with, the average refrigerator temperature were 7.06±0.82℃, 38.9% when the standard (-2 to 5℃) was observed 8% of cases complying with the standard (below -18℃) at -8.56±0.76℃ were investigated. As a result of ATP measurement, the surfaces of knife edge, cutting board, refrigerator door handle, worktable, and sink, which are not sterilized at all, were not suitable (accept ratio 0%), sterilized food plate (accept ratio 54.2%) and utensil for preserved food (accept ratio 75%) had a relatively high accept ratio. China's hygiene regulations should be revised in the direction of strengthening disinfection practices for facilities, equipment, and the environment, and hygiene measures such as education on disinfection and preparation of economical disinfection methods should be established.

중국의 지역별 옴니채널시장 잠재력 평가에 관한 연구 (A Study on Evaluation of the Potential of Omni-Channel Market in China by Region)

  • 정석모;이충배
    • 무역학회지
    • /
    • 제43권1호
    • /
    • pp.131-152
    • /
    • 2018
  • 본 연구는 중국의 각 지역별 시장에 대한 옴니채널시장 잠재력을 분석·평가함으로써 한국 물류기업 및 소매유통기업의 협력진출을 위한 전략수립에 대한 시사점을 제시하는데 목적이 있다. 중국의 전자상거래, 소매판매, 특송서비스에 영향을 미치는 변수를 문헌연구를 토대로 추출하여 회귀분석 및 분산분해 분석을 실시하였다. 즉, 중국 31개 지역의 각 지역별 통계자료를 활용하여 각 지역별 전자상거래 및 소비재 소매판매액에 영향을 미치는 변수를 분석하였다. 또한 중국의 특송서비스 판매량, 물류GDP, 휴대폰 사용자 수의 상호 반응 정도를 추정하기 위해 분산분해 분석을 실시하였다. 연구결과를 토대로 지역별 순위를 선정하여 중국 옴니채널시장의 잠재력을 평가하였다. 또한 이를 바탕으로 소매기업과 물류기업의 중국 옴니채널 시장 진출방안에 대한 시사점을 제공하였다.

  • PDF

Cloning, Expression, and Characterization of a Cold-Adapted and Surfactant-Stable Alginate Lyase from Marine Bacterium Agarivorans sp. L11

  • Li, Shangyong;Yang, Xuemei;Zhang, Lan;Yu, Wengong;Han, Feng
    • Journal of Microbiology and Biotechnology
    • /
    • 제25권5호
    • /
    • pp.681-686
    • /
    • 2015
  • The purpose of this study was to find a cold-adapted and surfactant-stable alginate lyase as a candidate for biotechnological and industrial applications. The gene for a new alginate lyase, AlyL1, from Agarivorans sp. L11 was cloned and expressed in Escherichia coli. The recombinant AlyL1 was most active at 40℃ (1,370 U/mg). It was a cold-adapted alginate lyase, which showed 54.5% and 72.1% of maximum activity at 15℃ and 20℃, respectively. AlyL1 was an alkaliphilic enzyme and most active at pH 8.6. In addition, it showed high stability in the presence of various surfactants at a high concentration (from 0.1% to 1% (w/v)). AlyL1 was an endo-type alginate lyase that degraded both polyM and polyG blocks, yielding disaccharides and trisaccharides as the main products. This is the first report of the cloning and functional expression of a cold-adapted and surfactant-stable alginate lyase. AlyL1 might be an interesting candidate for biotechnological and industrial applications.

Regularity and coupling correlation between acoustic emission and electromagnetic radiation during rock heating process

  • Kong, Biao;Wang, Enyuan;Li, Zenghua
    • Geomechanics and Engineering
    • /
    • 제15권5호
    • /
    • pp.1125-1133
    • /
    • 2018
  • Real-time characterization of the rock thermal deformation and fracture process provides guidance for detecting and evaluating thermal stability of rocks. In this paper, time -frequency characteristics of acoustic emission (AE) and electromagnetic radiation (EMR) signals were studied by conducting experiments during rock continuous heating. The coupling correlation between AE and EMR during rock thermal deformation and failure was analyzed, and the microcosmic mechanism of AE and EMR was theoretically analyzed. During rock continuous heating process, rocks simultaneously produce significant AE and EMR signals. These AE and EMR signals are, however, not completely synchronized, with the AE signals showing obvious fluctuation and the EMR signals increasing gradually. The sliding friction between the cracks is the main mechanism of EMR during the rock thermal deformation and fracture, and the AE is produced while the thermal cracks expanding. Both the EMR and AE monitoring methods can be applied to evaluate the thermal stability of rock in underground mines, although the mechanisms by which these signals generated are different.

Tracking the Movement and Distribution of Green Tides on the Yellow Sea in 2015 Based on GOCI and Landsat Images

  • Min, Seung-Hwan;Oh, Hyun-Ju;Hwang, Jae-Dong;Suh, Young-Sang;Park, Mi-Ok;Shin, Ji-Sun;Kim, Wonkook
    • 대한원격탐사학회지
    • /
    • 제33권1호
    • /
    • pp.97-109
    • /
    • 2017
  • Green tides that developed along the coast of China in 2015 were detected and tracked using vegetation indices from GOCI and Landsat images. Green tides first appeared near the Jiangsu Province on May 14 before increasing in size and number and moving northward to the Shandong Peninsula in mid-June. Typhoon Cham-hom passed through the Yellow Sea on July 12, significantly decreasing the algal population. An algae patch moved east toward Korea and on June 18 and July 4, several masses were found between the southwestern shores of Korea and Jeju Island. The floating masses found in Korean waters were concentrated at the boundary of the open sea and the Jindo cold pool, a phenomenon also observed at the boundary of coastal and offshore waters in China. Sea surface temperatures, derived from NOAA SST data, were found to play a role in generation of the green tides.

Development of Korea-China Train Ferry System An Example of Short Sea Shipping in Northeast Asia

  • Lee, Jae-Wook;Lee, Seung-Hee;Kang, Young-Jin
    • Journal of Ship and Ocean Technology
    • /
    • 제10권3호
    • /
    • pp.36-48
    • /
    • 2006
  • The train ferry, accommodating trains roll on and off, is often called as 'Railway on the Sea' or 'Blue High-way' since she can connect the railways or roads segregated by the sea and improve the accessibility and continuity of land transport systems. The ferry is especially appropriate to the intermodal transport routes mostly passing through the land but have relatively short sea segment. As the train ferry can considerably reduce the cost and time for cargo handling and modal shift and unnecessitates excessive initial investment on infrastructures such as large harbor cranes or vast container yards, introduction of train Ro-Ro ferries lessen the total transport cost for door-to-door transportation with full exploitation of the existing railway system. All the ports placed in Shandong, Liaoning and Jiangsu provinces of China are connected to the hinterlands via well developed railway and road systems. Therefore, realization of the Incheon-Yantai train ferry system will link Korea railways to TCR and the 4,131-kilometer-long Longhai-Lanxin Railway, along the famous Eurasian Continental Bridge. In the present paper, the Incheon-Yantai train ferry will be introduced as a good example of an efficient multimodal short sea shipping system for Northeast Asia.

The Research and Application of Protective Coating for PCCP

  • Lin, Zhu;Xu, Cuizhu;Zhang, Li;Fan, Yunpeng;Zhang, Qibin
    • Corrosion Science and Technology
    • /
    • 제7권5호
    • /
    • pp.265-268
    • /
    • 2008
  • Prestressed Concrete Cylinder Pipe(PCCP) had became one of the dominating kinds of pipes substituting for steel pipes because of its unique feature (high intensity, high pressure and high leakproofness). PCCP was produced firstly by Bonna company in France. By the end of 20th century, there were over 19000 km of this product installed in America. PCCP was introduced from Ameron company by Shandong Eletric Power Pipeline Engineering Company in 1988. As the statistical data in 2002, 700 km of PCCP had been applied in China, and the application trended towards rapid increase.Since prestressing wire would be corroded in environment, Several accidents due to the breakdown of pipe had happened. Consequently the external wall of pipe should be covered with protective coatings. There was a lack of technical study in corrosion and control of PCCP, because PCCP had been applied for a short time in China. in order to ensure the service life of PCCP, we have developed a kind of protective coating for concrete pipe, which had high intensity and anti-corrosive property with convenient applicability. The physical and chemical properties, painting technology and field application of this coating was introduced in the paper, at the same time, the future of external protective coating for PCCP was looked into.

Atmospheric Corrosion of 7B04 Aluminum Alloy in Marine Environments

  • Zhang, Xiaoyun;Liu, Ming;Lu, Feng;Liu, Minghui;Sun, Zhihua;Tang, Zhihui
    • Corrosion Science and Technology
    • /
    • 제17권1호
    • /
    • pp.6-11
    • /
    • 2018
  • Outdoor exposure tests using of 7B04 aluminium alloy samples including plate, tensile and various SCC samples were carried out in Tuandao station, Shandong province (East of China) and Wanning station, Hainan province (South of China). Corrosion characteristics including weight loss, microstructure, tensile strength and SCC susceptibility were investigated. The corrosion rates in Tuandao and Wanning showed high to low and the corrosion rates changed to the following equation of $w=at^b$ (b<1). The corrosion of 7B04 aluminium alloy in Wanning was more serious than that in Tuandao. Pitting appeared at early stage of expose test, and it can be changed to general corrosion with test time extension. The 7B04 aluminium alloy of which specimen shapes are forging and thick plate also showed SCC (Stress corrosion cracking) in the marine atmosphere. The higher SCC sensitivity was observed in Wanning station than in Tuandao station. The 7B04 aluminium alloy with a high stress level was more sensitive to SCC. Intergranular and transgranular or a mixed mode of cracking can be observed in different marine exposure.

Applying Keyword Analysis to Predicting Agriculture Product Price Index: The Case of the Chinese Farming Market

  • Wang, Zhi-yuan;Kwon, Ohbyung;Liu, Fan
    • Asia Pacific Journal of Business Review
    • /
    • 제1권1호
    • /
    • pp.1-22
    • /
    • 2016
  • The prediction of prices of agricultural products in the agriculture IT sector plays a significant role in the economic life of consumers and anyone engaged in agricultural business, and as these prices fluctuate more often than do other prices, the prediction of these prices holds a great deal of research promise. For this reason, academic literature has provided studies on the factors influencing the prices of agricultural products and the price index. However, as these factors vary, they are difficult to predict, resulting in the challenge of acquiring quantitative data. China is one example of a country without a reliable prediction system for prices of agricultural products. Fortunately, disclosed heterogeneous data can be found on the Internet, which allows for the effective collection of factors related to the prediction of these product prices through the use of text mining. The data provided online is valuable in that they reflect the opinions of the general public in real-time. Accordingly, this study aims to use heterogeneous data from the Internet and suggest a model predicting the prices of agricultural products before functional analyses. Toward this end, data analyses were conducted on the Chinese agricultural products market, one of the largest markets in the world.

Using Huff Model for Predicting the Potential Chiness Retail Market

  • Su, Shuai;Youn, Myoung-Kil
    • Asian Journal of Business Environment
    • /
    • 제1권1호
    • /
    • pp.9-12
    • /
    • 2011
  • This study aimed to predict retail sales of local markets in Jinan city of China with the Huff model. Using the Huff Model, we examined whether the predicted retail sales of local markets may be different in Jinan, China, from the department stores, supermarkets, shopping centers/shopping malls, and home appliance stores. The probability that a customer shops at location depends upon the store size and the travel time factors calculated by the Huff Model. We found that the predictedretail sales of shopping malls have a greater value than others. People who live in a mid-sized city may have easier access to any stores within the city boundary than people in metropolitan areas. Therefore, people in a mid-sized city are more sensitive to store size, because a bigger store size means greater opportunities, incentivizing consumers to travel further to competing stores after passing by nearer, smaller stores. This study has some limitations. First, the data is somewhat restricted in that the subject stores do not represent all of the stores in Jinan. Second, we cannot compare the estimated market share of the stores and the actual sales data. It is further suggested in this study that more databases be developed throughout such East Asian countries as Korea and Japan and that a different parameter λ value in the Huff Model be utilized for mid-sized cities.

  • PDF