• Geomechanics and Engineering
• /
• 제24권5호
• /
• pp.491-503
• /
• 2021

Shallow tunnels are vulnerable to earthquakes, and shallow ground is usually inhomogeneous. Based on the limit equilibrium method and variational principle, a solution for the seismic collapse mechanism of shallow tunnel in inhomogeneous ground is presented. And the finite difference method is employed to compare with the analytical solution. It shows that the analytical results are conservative when the horizontal and vertical stresses equal the static earth pressure and zero at vault section, respectively. The safety factor of shallow tunnel changes greatly during an earthquake. Hence, the cyclic loading characteristics should be considered to evaluate tunnel stability. And the curve sliding surface agrees with the numerical simulation and previous studies. To save time and ensure accuracy, the curve sliding surface with 2 undetermined constants is a good choice to analyze shallow tunnel stability. Parameter analysis demonstrates that the horizontal semiaxis, acceleration, ground cohesion and homogeneity affect tunnel stability greatly, and the horizontal semiaxis, vertical semiaxis, tunnel depth and ground homogeneity have obvious influence on tunnel sliding surface. It concludes that the most applicable approaches to enhance tunnel stability are reducing the horizontal semiaxis, strengthening cohesion and setting the tunnel into good ground.

• Geomechanics and Engineering
• /
• 제22권3호
• /
• pp.207-217
• /
• 2020

Slope reliability analysis and risk assessment for spatially variable soils under rainfall infiltration are important subjects but they have not been well addressed. This lack of study may in part be due to the multiple and diverse evaluation indexes and the low computational efficiency of Monte-Carlo simulations. To remedy this, this paper proposes a highly efficient computational method for investigating random field problems for slopes. First, the probability density evolution method (PDEM) is introduced. This method has high computational efficiency and does not need the tens of thousands of numerical simulation samples required by other methods. Second, the influence of rainfall on slope reliability is investigated, where the reliability is calculated from based on the safety factor curves during the rainfall. Finally, the uncertainty of the sliding mass for the slope random field problem is analyzed. Slope failure consequences are considered to be directly correlated with the sliding mass. Calculations showed that the mass that slides is smaller than the potential sliding mass (shallow surface sliding in rainfall). Sliding mass-based risk assessment is both needed and feasible for engineered slope design. The efficient PDEM is recommended for problems requiring lengthy calculations such as random field problems coupled with rainfall infiltration.

• Geomechanics and Engineering
• /
• 제9권4호
• /
• pp.427-445
• /
• 2015

By means of finite element numerical simulation and pseudo-static method, the shallow-buried bilateral bias twin-tube tunnel subject to horizontal and vertical seismic forces are researched. The research includes rupture angles, the failure mode of the tunnel and the distribution of surrounding rock relaxation pressure. And the analytical solution for surrounding rock relaxation pressure is derived. For such tunnels, their surrounding rock has sliding rupture planes that generally follow a "W" shape. The failure area is determined by the rupture angles. Research shows that for shallow-buried bilateral bias twin-tube tunnel under the action of seismic force, the load effect on the tunnel structure shall be studied based on the relaxation pressure induced by surrounding rock failure. The rupture angles between the left tube and the right tube are independent of the surface slope. For tunnels with surrounding rock of Grade IV, V and VI, which is of poor quality, the recommended reinforcement range for the rupture angles is provided when the seismic fortification intensity is VI, VII, VIII and IX respectively. This study is expected to provide theoretical support regarding the ground reinforcement range for the shallow-buried bilateral bias twin-tube tunnel under seismic force.

• Geomechanics and Engineering
• /
• 제19권1호
• /
• pp.1-9
• /
• 2019

Shallow failures occur frequently in both engineered and natural slopes in expansive soils. Rainfall infiltration is the most predominant triggering factor that contributes to slope failures in both expansive soils and clayey soils. However, slope failures in expansive soils have some distinct characteristics in comparison to slopes in conventional clayey soils. They typically undergo shallow failures with gentle sliding retrogression characteristics. The shallow sliding mass near the slope surface is typically in a state of unsaturated condition and will exhibit significant volume changes with increasing water content during rainfall periods. Many other properties or characteristics change such as the shear strength, matric suction including stress distribution change with respect to depth and time. All these parameters have a significant contribution to the expansive soil slopes instability and are difficult to take into consideration in slope stability analysis using traditional slope stability analysis methods based on principles of saturated soil mechanics. In this paper, commercial software VADOSE/W that can account for climatic factors is used to predict variation of matric suction with respect to time for an expansive soil cut slope in China, which is reported in the literature. The variation of factor of safety with respect to time for this slope is computed using SLOPE/W by taking account of shear strength reduction associated with loss of matric suction extending state-of-the art understanding of the mechanics of unsaturated soils.

• Geomechanics and Engineering
• /
• 제4권3호
• /
• pp.173-190
• /
• 2012

With recent growing interests in the Performance-Based Seismic Design and Assessment Methodology, more realistic modeling of a structural system is deemed essential in analyzing, designing, and evaluating both newly constructed and existing buildings under seismic events. Consequently, a shallow foundation element becomes an essential constituent in the implementation of this seismic design and assessment methodology. In this paper, a contact interface fiber section element is presented for use in modeling soil-shallow foundation systems. The assumption of a rigid footing on a Winkler-based soil rests simply on the Euler-Bernoulli's hypothesis on sectional kinematics. Fiber section discretization is employed to represent the contact interface sectional response. The hyperbolic function provides an adequate means of representing the stress-deformation behavior of each soil fiber. The element is simple but efficient in representing salient features of the soil-shallow foundation system (sliding, settling, and rocking). Two experimental results from centrifuge-scale and full-scale cyclic loading tests on shallow foundations are used to illustrate the model characteristics and verify the accuracy of the model. Based on this comprehensive model validation, it is observed that the model performs quite satisfactorily. It resembles reasonably well the experimental results in terms of moment, shear, settlement, and rotation demands. The hysteretic behavior of moment-rotation responses and the rotation-settlement feature are also captured well by the model.

• Structural Engineering and Mechanics
• /
• 제58권6호
• /
• pp.1045-1075
• /
• 2016

Shallow footings are one of the most common types of foundations used to support mid-rise buildings in high risk seismic zones. Recent findings have revealed that the dynamic interaction between the soil, foundation, and the superstructure can influence the seismic response of the building during earthquakes. Accordingly, the properties of a foundation can alter the dynamic characteristics (natural frequency and damping) of the soil-foundation-structure system. In this paper the influence that shallow foundations have on the seismic response of a mid-rise moment resisting building is investigated. For this purpose, a fifteen storey moment resisting frame sitting on shallow footings with different sizes was simulated numerically using ABAQUS software. By adopting a direct calculation method, the numerical model can perform a fully nonlinear time history dynamic analysis to realistically simulate the dynamic behaviour of soil, foundation, and structure under seismic excitations. This three-dimensional numerical model accounts for the nonlinear behaviour of the soil medium and structural elements. Infinite boundary conditions were assigned to the numerical model to simulate free field boundaries, and appropriate contact elements capable of modelling sliding and separation between the foundation and soil elements are also considered. The influence of foundation size on the natural frequency of the system and structural response spectrum was also studied. The numerical results for cases of soil-foundation-structure systems with different sized foundations and fixed base conditions (excluding soil-foundation-structure interaction) in terms of lateral deformations, inter-storey drifts, rocking, and shear force distribution of the structure were then compared. Due to natural period lengthening, there was a significant reduction in the base shears when the size of the foundation was reduced. It was concluded that the size of a shallow foundation influences the dynamic characteristics and the seismic response of the building due to interaction between the soil, foundation, and structure, and therefore design engineer should carefully consider these parameters in order to ensure a safe and cost effective seismic design.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.260-260
• /
• 2017

This study aims to compare the performance of TRIGRS (Transient Rainfall Infiltration and Grid-based Regional Slope-stability model) and TiVaSS (Time-variant Slope Stability model) in the prediction of rainfall-induced shallow landslides. TRIGRS employs one-dimensional (1-D) subsurface flow to simulate the infiltration rate, whereas a three-dimensional (3-D) model is utilized in TiVaSS. The former has been widely used in landslide modeling, while the latter was developed only recently. Both programs are used for the spatiotemporal prediction of shallow landslides caused by rainfall. The present study uses the July 2011 landslide event that occurred in Mt. Umyeon, Seoul, Korea, for validation. The performance of the two programs is evaluated by comparison with data of the actual landslides in both location and timing by using a landslide ratio for each factor of safety class ( index), which was developed for addressing point-like landslide locations. In addition, the influence of surface flow on landslide initiation is assessed. The results show that the shallow landslides predicted by the two models have characteristics that are highly consistent with those of the observed sliding sites, although the performance of TiVaSS is slightly better. Overland flow affects the buildup of the pressure head and reduces the slope stability, although this influence was not significant in this case. A slight increase in the predicted unstable area from 19.30% to 19.93% was recorded when the overland flow was considered. It is concluded that both models are suitable for application in the study area. However, although it is a well-established model requiring less input data and shorter run times, TRIGRS produces less accurate results.

• 농업과학연구
• /
• 제25권1호
• /
• pp.97-106
• /
• 1998

본 연구는 현재 산사태 대책수립에 많이 이용되고 있는 원호활동 해석방법의 문제점을 규명하기 위하여 실시되었으며, 여기서 얻어진 결과를 요약하면 다음과 같다. 1. 40개의 모델사면을 지층에 따라 활동면을 분석해 본 결과, 풍화토와 풍화암의 경계 부분이 다른 부분에 비하여 활동이 일어날 가능성이 높은 것으로 나타났다. 2. 우리나라에서 발생하는 산사태의 대부분이 깊이 2m를 전후로 하여 토층의 경계부근등 주로 불연속면을 따라 발생하기 때문에 절취사변에 대한 산사태의 안정해석을 할때, 무한사면해석을 우선 고려하는 것이 안전한 설계가 될 것으로 판단된다. 3. 사면경사가 일정한 상태에서 사면길이만을 변화 시켰을 경우, 원호활동사면인 경우는 토층이 얕고 사면길이가 짧을수록 안전하였으나 무한사면인 경우는 사면길이에 관계없이 최소안전율은 동일하였다. 4. 우리나라 산사태의 대부분을 차지하는 사면경사 $30^{\circ}$의 조건으로 원호활동해석과 무한활동해석으로 분석한 결과, 상호간의 최소안전율의 차이가 많으며 원호활동해석 방법은 무한활동해석에 비해 과다하게 안전측으로 나타났다.

• 한국지반공학회논문집
• /
• 제32권8호
• /
• pp.47-59
• /
• 2016

얕은 기초의 회전거동은 지진 시 상부 구조물의 지진하중을 줄이는 효과적인 방법으로 대두되고 있다. 그러나 회전거동의 메커니즘에 대한 이해부족과 항복거동으로 인한 지반변형 때문에 시공에 적용되지 못하고 있다. 본 연구에서는 원심모형실험을 이용한 수평반복하중 실험을 통해 세장비가 다른 시스템의 근입된 얕은 기초의 회전거동 특성을 평가하였다. 실험결과를 통해 기초의 회전거동으로 인한 하부지반면의 원형현상을 관찰하였으며, 이로 인해 기초의 최대 전도모멘트가 기초의 극한 모멘트 지지력과 같아지는 것을 알 수 있었다. 기초 저면에서 관측된 토압변화를 통해 항복거동으로 인한 수평거동과 회전거동의 연결(coupling)과 분리(decoupling)현상을 볼 수 있었다. 또한 기초의 회전각이 증가할수록 지반의 비선형성과 에너지 감쇠가 커짐을 알 수 있었고, 근입된 기초의 극한 모멘트 지지력이 지표면에 놓인 기초의 극한 모멘트 지지력보다 더 커지는 것을 확인하였다. 본 연구를 통해 기초의 회전거동을 이용한 내진 설계 시 보다 정확하고 적절한 기초의 극한 모멘트 지지력을 제시할 수 있을 것이라 판단된다.

• 한국해안해양공학회지
• /
• 제17권4호
• /
• pp.280-293
• /
• 2005

본 연구에서는 직립 방파제 케이슨의 활동량 산정 모델과 케이슨 복구비용 계산 모델을 결합하여 기대 총 건설비 산정 모델을 수립하였다. 직립 방파제 케이슨의 최적 단면은 활동량의 허용 범위 내에서 기대 총 건설비가 최소가 되는 단면으로 정의된다 활동량의 허용 범위는 방파제 수명 동안의 기대 활동량을 0.1m로 하는 경우와 방파제 수명 동안의 누적 활동량이 0.3 m를 초과하는 확률을 0.1 이내로 하는 경우를 고려하였다. 또한 할인율 개념을 도입하여 미래 가치로 산정된 복구비용을 현재가치로 환산하였다. 작은 재현주기에 대해서 설계된 케이슨의 경우 잦은 복구 활동으로 인해 할인율을 적용했을 때의 기대 총 건설비용이 할인율을 적용하지 않았을 때보다 작아진다. 수심이 얕을 때 본 설계법이 기존의 결정론적 설계법보다 더 작은 단면을 요구하여 경제적인 설계가 가능하다. 한편, 수심이 얕을 때는 전술한 활동량 허용 기준들이 비슷한 결과를 나타내지만, 깊은 수심에서는 전자가 후자보다 더 큰 단면을 요구한다.