• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1041-1046
• /
• 2003

In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternating field vertically to the EPD field has been developed for the first time and applied to the electrophoretic deposition process. The applied alternating electric field, so called Shaky Alternating Assisted Field, caused a force to be exerted on each YBCO particle and resulted in a shaking of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. The usual commercial electrical power was used for the vertically applied alternating voltage and the induced electric field was 25-120 V/cm at 60Hz. The thick film fabricated by the method developed in this paper showed better surface uniformity without crack and porosity and improved film characteristics such as critical temperature (Tc,zero = 90 K) and critical current density (2354 A/$\textrm{cm}^2$), Therefore, it is expected that the shaky-aligned electrophoretic deposition method can be used to fabricate superconductor films through a simpler process and at less expense.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.111-114
• /
• 2003

In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternating field vertically to the EPD field has been developed for the first time and applied to the electrophoretic deposition process. The applied alternating electric field caused a force to be exerted on each YBCO particle and resulted in a shaking of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. The usual commercial electrical power was used for the vertically applied alternating voltage and the induced electric field was 25-120 V/cm at 60Hz. The thick film fabricated by the method developed in this paper showed better surface uniformity without crack and porosity and improved film characteristics such as critical temperature ($T_{c,zero}$ : 90 K) and critical current density ($2354\;A/cm^2$). Therefore, it is expected that the shaky-aligned electrophoretic deposition method can be used to fabricate superconductor films through a simpler process and at less expense.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.82-85
• /
• 2003

This dissertation describes an optimization method for fabricating thick films with superconducting YBCO powders by electrophoresis technique. The lateral alternating applied voltage caused to shake the superconducting powder vertically to the deposition field during the process of the oriented deposition so that it was deposited along the c-axis on the silver tape with shaky-aligned EPD. As the result, the optimized thin film fabrication method was obtained to get more dense and uniform surface morphology as well as the improved critical current density. For commercial utilization and efficiency, in this dissertation, alternating voltage of 25-120 V/cm in frequency of 60Hz was proposed to apply it as a subsidiary source for shaky-flow deposition so that the fabricated thin film showed uniform surface morphology with less voids and cracks and $T_{c.zero}$ of 90 K and the critical current density of $3419A/cm^2$.

• 한국정보통신학회논문지
• /
• 제8권3호
• /
• pp.679-685
• /
• 2004

전기영동전착법은 제작장치와 공정이 간단하고 두께제어 및 다양한 형태의 초전도 막과 선재 제작이 가능한 경제적 효율성과 기술적 장점을 가지고 있다. 본 논문에서는 전착공정 개발을 통한 분말의 치밀성 및 배향성 향상을 위한 최적화 방안과, 건조 및 열처리 과정에서의 크랙 및 기공현상과 같은 문제점을 극복할 수 있는 균일한 표면의 확보에 관한 연구를 수행하였으며 전기영동전착 초전도 후 막 테이프 제조를 위한 공정의 최적화 방안에 대하여 연구하였다. YBCO 초전도 후막의 균일한 표면과 초전도특성 향상을 위한 공정개선방법으로는 수직방향 교류전계 인가 방식을 적용한 시스템을 최초로 개발하여 전기영동전착 공정에 적용하였다. 본 연구에서 제안한 수직방향 교류전계 인가 방식은 경제적 효율성을 위하여 60 Hz의 25∼120 V/cm의 상용전원을 사용하였으며, 제작된 후막은 기공과 크랙현상이 제거된 균일한 후막으로 여기서 얻어진 대표적인 특성 값들은 임계온도(Tc,zero) 90 K, 임계전류밀도 3419 A/$\textrm{cm}^2$의 값을 얻었다. 직류 전착전계만을 사용하여 제작된 후막의 임계전류밀값인 2354 A/$\textrm{cm}^2$에 비하여 45% 이상 향상된 특성을 확보하였다.