• 한국지반환경공학회 논문집
• /
• 제15권4호
• /
• pp.43-51
• /
• 2014

시험 설계된 초장대 사장교의 고주탑을 지지하는 대수심 대형 복합기초의 지중 대구경 현장타설말뚝을 허용응력 설계법으로 설계하고, 지지력에 대한 신뢰성 해석을 통해 파괴확률을 평가하였다. 말뚝의 지지력에 대한 허용응력 설계 결과를 신뢰성 해석으로 분석하였으며 파괴확률은 CFEM의 경우 0.12 %, 한국도로공사기준 방법의 경우 0.0002 %, 구조물기초설계기준의 경우 0.003 %였다. 허용응력 설계에서는 안전율 3을 적용하여 대구경 현장타설말뚝의 허용지지력을 구하였으며, 그 결과에 대한 신뢰성 해석을 실시하였다. AASHTO(2007)에서 제시하고 있는 파괴확률($P_f$) 0.02 %일 때 CFEM 방법에서는 근입 깊이가 25 % 만큼 증가하였으며 한국도로공사기준(KHCC)에서는 근입깊이를 60 %, 구조물기초설계기준(SFDC)에서는 근입 깊이를 89 % 만큼 감소시킬 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.132-137
• /
• 1997

In this study, the effect of load torque on the synchronous whirling of a rotor system has been studied analytically. Results show that the critical value of load torque to damping exists above which synchronous response decreases with increasing load torque. It has been also shown that the synchronous whirling amplitudes are more sensitive to the value of eccentricity and the ratio of disk radius to shaft length of the rotor system than other design parameters for a fixed value of load torque.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1452-1459
• /
• 2010

Application of long-span bridge, which is affected by parameters such as span length, shoe boundary condition, track property and stiffness of superstructure and substructure etc., can vary. Especially, by CWR aspects of the axial force, that can be less constraints of construction depending on whether the application of rail expansion joint(REJ), which has disadvantaged in terms of maintenance. In this study, it was performed parameter study for multiple variables (shaft length, the upper and lower cross-section characteristics, track characteristics, etc.) in terms of CWR aspects. Structure-rail interaction analysis was applied to the typical simple span PSC Box and 3 span continuous bridge Extradosed Bridge(50m+80m+50m) excluding REJ. If you set the boundary e of variables for long-span railway bridge excluding REJ through the this study, when designing future is expected to be able to useful.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.40-46
• /
• 2012

In this study, numerical analysis was conducted to understand the flow characteristics of lubrication system in a manual transmission installed in a commercial vehicle. Also, the analysis was conducted with the purpose of improving the heat and lubricative condition of the transmission. Discharging flow rates on each oil hole outlet according to various engine rotating speed and the length of oil hole branch was calculated. In conclusion, as engine rotating speed is high and the length of oil hole branch is long, the discharging flow rate is high by virtue of the centrifugal force. In addition, this study proposed data for optimal design of lubrication system in manual transmission for a commercial vehicle.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.106-113
• /
• 2014

Rotor eccentricity is one of the major factors that directly influence the security of horizontal electrical machines, and the critical speed of the shaft has a close relationship with vibration. This paper deals with the influence of thermal expansion on the rotor eccentricity and critical speed in large dry submersible motors. The dynamic eccentricity (where the rotor is still turning around the stator bore centre but not its own centre) and critical speed of a three-phase squirrel-cage submersible induction motor are calculated via hybrid analytical/finite element method. Then the influence of thermal expansion is investigated by simulation. It is predicted from the study that the thermal expansion of the rotor and stator gives rise to a significant air-gap length decrement and an inconspicuous slower critical speed. The results show that the thermal expansion should be considered as an impact factor when designing the air gap length.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권4호
• /
• pp.156-161
• /
• 2002

This paper proposes an optimized universal motor for improving its performance using the finite element method (FEM) with the (1＋1) Evolution Strategy (ES) algorithm. To do this, various design parameters are modified, such as air gap length, shape of motor slot, pole shoe, pole width, and rotor shaft diameter. Two parameters (arc length of stator pole and thickness of pole shoe) are chosen and optimized using the program, and the optimized model is built and tested with a performance measuring system. The measured values of the model are compared with those of the initial and the optimized model to prove the algorithm. As a result, the final model improves its performance compared with those of the initial model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1229-1234
• /
• 2001

There are three items, which are panhead displacement, tilting angle of pan head, required moment of main shaft, which representing kinematic performance of pantograph. Kinematic variables effective on kinematic performance are length of each components and installation angle, In this study, cost function is defined with 3 items, By this cost function, length of thrust rod was optimized. Finite element analysis was used to consider structural soundness. Finite element model was qualified by comparison between analysis result with experiment result. By qualified F.E, model various severe condition was simulated to consider structural soundness.

• 대한족부족관절학회지
• /
• 제27권3호
• /
• pp.93-98
• /
• 2023

Purpose: This study compared the functional and cosmetic treatment outcomes of intramedullary nailing (IM nail) and minimally invasive plate osteosynthesis (MIPO) for distal tibia shaft fractures. Materials and Methods: Forty-eight patients with distal tibia shaft fractures (distal 1/3 of the diaphysis, AO/OTA [AO Foundation/Orthopaedic Trauma Association]) 43 managed by an IM nail (n=30) or MIPO (n=18) who had minimum one-year follow-up were enrolled in this study. The radiological, functional, and cosmetic outcomes in the two groups were compared retrospectively. Results: All patients achieved bone union. The mean bone union time of the IM nail and MIPO groups was 18.5 and 22.6 weeks, respectively (p=0.078). One patient in the MIPO group showed posterior angulation and valgus deformity of more than five degrees. The mean American Orthopaedic Foot and Ankle Society (AOFAS) functional scores were similar: 83.3 in the IM nail group and 84.6 in the MIPO group (p=0.289). The most salient difference was the cosmetic result of the surgical scar. The length of the scars around the ankle in the IM nail group was significantly smaller than the MIPO group (2.6 cm vs. 10.6 cm; p=0.035). The patient satisfaction survey of surgical scars revealed a significantly higher satisfaction rate in the IM nail group than in the MIPO group (93% vs. 44%; p<0.001). Conclusion: This study showed that both treatment methods for distal tibia shaft fractures have similar therapeutic efficacy regarding the radiological and functional outcomes. On the other hand, the IM nail technique showed superior cosmetic outcomes than the MIPO technique. IM nails may be more recommended in patients with high demand for cosmetic results.

• 한국융합학회논문지
• /
• 제9권8호
• /
• pp.179-184
• /
• 2018

자동차의 구동방식은 전륜구동, 후륜구동, 4륜구동의 방식이 있다. 구동방식에서 운전자가 원하는 방향으로 전환하는 것과 바퀴에 동력을 전달하여 구동하는 두 가지의 역할을 수행하는데 있어 가장 중요한 부품이 등속 조인트이다. 도로상에서 주행 시에는 노면의 상태에 따라서 동력을 전달하는 부품들에 충격이 가해질 수 있다. 본 연구에서는 각각 샤프트의 길이가 다른 3개의 등속 조인트 각 모델들은 CATIA로 모델링하였고 ANSYS를 이용하여 구조 및 피로해석을 수행하였다. 본 연구 결과로는 Model 2가 다른 모델 대비 뛰어난 내구성을 가짐을 알 수 있었다. 이러한 결과를 이용하여 충격에 대한 내구성을 가지는 등속 조인트 설계를 할 때에 유용한 자료가 될 것이라고 사료되며, 등속 조인트의 디자인을 융합기술에 접목하여 미적 감각을 나타낼 수 있다.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.189-197
• /
• 2002

개단말뚝의 지지력은 말뚝의 폐색정도에 영향을 받으며, 이러한 폐색정도는 관내토증분비인 IFR에 의하여 정량화 될 수 있다. 그러나 말뚝의 폐색정도가 말뚝의 지지력에 미치는 영향을 정확하게 고려하는 개단말뚝의 지지력 산정기준이 현재까지 없는 실정이다. 따라서 말뚝의 폐색정도가 지지력에 미치는 영향을 조사하기 위하여 계측기가 부착된 모형 개단말뚝과 가압토조를 이용해서 모형말뚝시험을 수행하였다. 시험결과 개단말뚝의 IFR은 말뚝의 관입깊이에 대한 관내토길이의 비로 정의되는 관내토길이비(PLR)로부터 예측이 가능함을 알 수 있었다. 그리고 개단말뚝의 선단 지지력과 주면마찰력은 말뚝의 IFR이 증가함에 따라 감소하는 경향을 보였다. 또한 이와 같은 모형말뚝시험의 결과에 근거하여 개단말뚝의 선단지지력과 주면마찰력을 산정할 수 있는 새로운 지지력산정식이 제안되었다.