• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.438-446
• /
• 2010

The purpose of this study is to establish the proper evaluation method of member forces on the propulsion shaft using strain gages to confirm bearing offset. The strain measurements to find out the bending moments of the shaft have been performed in the yard to be compared with the results of the shaft alignment analysis. The clutch of the propulsion shaft is highly sensitive to shear forces as well as bending moments and the necessity of the measurement of shear forces on the shaft for normal operation of the clutch is recently on the rise. In this study, an evaluation method of the member forces (bending moments and shear forces) of the shaft clutch based on the shaft strain measurement is established. Through the application of this method to the eight $216,000\;m^3$ LNG carriers, the safeties of the clutch systems are evaluated and the better bearing offsets are deduced for the LNG carriers. After adjusting the bearing offsets, all the sea trials of the eight LNG carriers are successfully carried out without any troubles.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 추계학술대회
• /
• pp.163-164
• /
• 2013

양방향차도선(CAR-FERRY)은 육지와 도서, 도서와 도서 간을 연결하는 교통수단 기능과 지속적인 해양관광객의 수요증가에 따른 해양관광 연계 연안여객 운송수단 역할을 하고 있다. 이에 따른 양방향 차도선은 이용의 편리성이 증대 되고 접안으로 인한 해양 사고를 줄일 수 있다. 양방향차도선은 등흘수(even) 상태로 프로펠러가 양쪽에 있기 때문에 프로펠러가 소직경 저회전으로 인하여 전진 운항 시에 반력에 의한 축계 및 프로펠러 파손 등이 발생할 수 있다. 이에 따른 엔진 출력, 선형, 비틀림 진동 등에 따른 감속기, 탄성커플링 선정, 횡진동 및 축계정렬(Shaft alignment)을 고려한 축계설계(베어링 수량, 폭, 간격)를 하여 선체의 추진축 1차 지지부의 구조에 대한 건전성을 평가하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제8권1호
• /
• pp.37-48
• /
• 1984

For the designing propulsion shafting of ship, shaft diameters are usually calculated according to the Society's rules and other scantlings such as a shaft length, coupling and taper parts, etc., are decided according to calculated diameters. And then, the torsional vibration, the lateral vibration and shaft alignment should be reviewed to check whether the resonance points of torsional or lateral vibration appear within the normal operating speed range and the shaft alignment is reasonable. If the results of calculations are unsatisfactory, this process should be repeated until the final condition is determined and the process of this work takes much time to carry out. To simplify the above tedious processes, authors have developed a computer program to fulfill the above design processes at once. This program takes aim at reducing the manual calculating work associated with the propulsion shafting of ship. To confirm the availability of developed computer program, several propulsion shaftings which are driven by diesel engines, have been analysed. The results calculated by authors developed computer program show comparatively good agreements with those of the actual propulsion shafting.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.134-137
• /
• 2005

Recently, in VLCC, shafting system is stiffer due to large engine power whereas hull structure is more flexible due to scantling optimization, which can be suffered from alignment damage by incompatibility between shafting and hull, In this study, shafting system without stern tube forward bush was adapted for less sensitive system against external factors. Also, shaft alignment analysis was considered with hull deflection at various ship loading conditions and stern tube after bush of long journal bearing was evaluated by static squeezing pressure and dynamic oil film pressure with sloping control. Whirling vibration was also reviewed to avoid resonance with propeller blade order. So, reliable shafting design for VLCC could be achieved through optimized alignment analysis for the system without stern tube forward bush.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.29-30
• /
• 2008

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1015-1019
• /
• 2001

There are several bearing systems at the large steam-turbines in thermal power plant. The bearing system is one of the most important parts of rotating machinery. The steam turbine vibrations mainly depend on the bearing oil and the shaft alignment condition. This paper describes on the steam turbine abnormal vibration due to the oil whip in terms of the shaft alignment in the thermal power plant.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.512-520
• /
• 2006

The effects of flexibilities of supporting structures on shaft alignment are growing as ship sizes are Increasing mainly for container carrier and LNG carrier. But, most of classification societies not only do not suggest any quantitative guidelines about the flexibilities but also do not have shaft alignment design program considering the flexibility of supporting structures. A newly developed program, which is based on innovative shaft alignment technologies including nonlinear elastic multi-support bearing concept and hull deflection database approach, has S basic modules : 1)fully automated finite element generation module, 2) hull deflection database and it's mapping module on bearings, 3) squeezing and oil film pressure calculation module, 4) optimization module and 5) gap & sag calculation module. First module can generate finite element model including shafts, bearings, bearing seats, hull and engine housing without any misalignment of nodes. Hull deflection database module has built-in absolute deflection data for various ship types, sizes and loading conditions and imposes the transformed relative deflection data on shafting system. The squeezing of lining material and oil film pressures, which are relatively solved by Hertz contact theory and built-in hydrodynamic engine, can be calculated and visualized by pressure calculation module. One of the most representative capabilities is an optimization module based on both DOE and Hooke-Jeeves algorithm.

• 해양환경안전학회지
• /
• 제24권6호
• /
• pp.803-809
• /
• 2018

갭색법(gap & sag method)은 선박 건조과정에서 축을 조립하기 전 최종적으로 축이 축계정렬 설계치와 동일한 위치에 거치되었는지의 여부를 확인하기 위해 사용되고 있는 방법이며, 조립 전 프로펠러축을 기준축으로 하여 양 축의 플랜지에서 축 자중에 의해 발생하는 갭색값을 통해 나머지 축계의 위치를 순차적으로 확정해 나간다. 만일 설계치와 다르게 기준축이 거치되는 경우 연쇄적으로 나머지 축의 거치에 영향을 주게 된다. 또한, 축 조립 후 검증과정에서 측정된 베어링 반력이 설령 설계치를 만족하더라도 선미관 후부측에서의 프로펠러축과 베어링간 상대적경사각을 추정할 수 없게 됨으로써 결과적으로 축계의 안정성에 부정적인 영향을 미칠 수 있다. 이러한 문제를 해결하기 위하여 본 연구에서는 실제 선미관 베어링 발열 및 개방검사 사례를 통해 선미관 베어링 유효지지점에 관한 이론계산 및 실측치분석 연구를 수행하고 이를 바탕으로 축계 정렬오차를 최소화하기 위한 축계 시공방법을 제안하였다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.131-131
• /
• 2017

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권4호
• /
• pp.288-294
• /
• 2016

선박이 고출력화, 대형화 됨에 따라 추진축의 강성은 증가한 반면에 선체는 고장력 후판을 사용하므로 이전의 선체보다 훨씬 더 쉽게 변형되는 실정이다. 이는 기존의 선박보다 더욱 정교한 축계정렬이 요구됨을 의미한다. 본 연구에서는 최근 친환경 고효율 선박으로 등장한 5만DWT급 석유화학제품운반선을 대상으로 스트레인게이지법을 이용한 계측을 실시하고 축계 베어링 반력 및 선체 변형량 분석을 수행하였다. 계측은 선박의 통상 흘수 변화를 고려한 5개 조건에서 수행하여 추진축계가 선체 변형의 영향 하에서도 허용치를 만족하는지 여부를 확인하였다. 또한 이론적 계산방법, 잭업법 및 스트레인게이지법의 결과를 상호 비교하여 해석의 신뢰성을 교차검증하였다.