• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.179-184
• /
• 2009

Robust face recognition under various illumination environments is difficult to achieve. For face recognition robust to illumination changes, usually face images are normalized with respect to illumination as a preprocessing step before face recognition. The anisotropic smoothing-based illumination normalization method, known to be one of the best illumination normalization methods, cannot handle casting shadows. In this paper, we present an efficient illumination normalization method for face recognition. The proposed illumination normalization method separates the effect of illumination from eigenfaces and constructs an illumination-separated eigenface subspace. Then, an incoming face image is projected into the subspace and the obtained projected face image is rendered so that illumination effects including casting shadows are reduced as much as possible. Application to real face images shows the proposed illumination normalization method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.12-17
• /
• 2008

In this paper, an I-V characteristics of bypass diode has been studied by counting the shading effect in photovoltaic module. The shadow induces hot spot phenomenon in PV module due to the increase of resistance in the current path. Two different types of PV module with and without bypass diode were fabricated to expect maximum output power with an increasing shading rate of 5 % on the solar cell. Temperature distribution is also detected by shading the whole solar cell for the outdoor test. From the result, the bypass diode works properly over 60 % of shading per cell with constant output power. Maximum power generation in case of solar cell being totally shaded with bypass diode decreases 41.3 % compared with the one under STC(Standard Test Condition). On the other hand, the maximum output power of the module without bypass diode gradually decreases by showing hot spot phenomenon with the increase of shading ratio on the cell and finally indicates 95.5 % of power loss compared with the output under STC. Finally the module temperature measured increases around $10^{\circ}C$ higher than that under STC due to hot-spots which come from the condition without bypass diode. It has been therefore one of the main reasons for degrading the PV module and shortening the durability of the PV system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.757-758
• /
• 2010

At the time of medical treatment and surgical operation, halogen lamp and plasma lamp were mainly used as luminous source for lighting. These two luminous sources have drawbacks that the life of lamps are not long, various problems are brought about due to excessive heat generation and its volume is very big because of cooling device. Accordingly, in this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance LED for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2A
• /
• pp.95-104
• /
• 2012

Pattern recognition using ensemble classifiers is composed of strong classifier which consists of many weak classifiers. In this paper, we used feature extraction to organize strong classifier using static camera sequence. The strong classifier is made of weak classifiers which considers environmental factors. So the strong classifier overcomes environmental effect. Proposed method uses binary foreground image by frame difference method and the boosting is used to train crowdedness model and recognize crowdedness using features. Combination of weak classifiers makes strong ensemble classifier. The classifier could make use of potential features from the environment such as shadow and reflection. We tested the proposed system with road sequence and subway platform sequence which are included in "AVSS 2007" sequence. The result shows good accuracy and efficiency on complex environment.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.118-126
• /
• 1998

A study to improve filling of semiconductor contact holes by enhancement of the directionality of the source beams has been undertaken. The collimation of source beams was improved by the ionized cluster beam deposition technique with modification of the cell geometry. The collimation tested with neutral beam was excellent. But, the Cu flims were grown in a columnar mode due to the lack of surface mobilit of the impinged clusters. A shadow effect also caused cleavage and consequent discontinuity at the steos as films grow. By applying acceleration voltage, the columnar growth in a contact hole of 0.5 $\mu$m diameter and 1 $\mu$m height disappeared and considerable coverage at the side wall of the contacts as well as perfect bottom coverage were observed. These are all due to the assistants of the accelerated ionized clusters with high kinetic energy. Thus we demonstrated that the ICB deposition technique can be used to completely fill sub-half-micron contact holes with high aspect ratio.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.199-199
• /
• 2011

Recently, Thin film transistors (TFTs) with amorphous oxide semiconductors (AOSs) can offer an important aspect for next generation displays with high mobility. Several oxide semiconductor such as ZnO, $SnO_2$ and InGaZnO have been extensively researched. Especially, as a well-known binary metal oxide, tin oxide ($SnO_2$), usually acts as n-type semiconductor with a wide band gap of 3.6eV. Over the past several decades intensive research activities have been conducted on $SnO_2$ in the bulk, thin film and nanostructure forms due to its interesting electrical properties making it a promising material for applications in solar cells, flat panel displays, and light emitting devices. But, its application to the active channel of TFTs have been limited due to the difficulties in controlling the electron density and n-type of operation with depletion mode. In this study, we fabricated staggered bottom-gate structure $SnO_2$-TFTs and patterned channel layer used a shadow mask. Then we compare to the performance intrinsic $SnO_2$-TFTs and doping hafnium $SnO_2$-TFTs. As a result, we suggest that can be control the defect formation of $SnO_2$-TFTs by doping hafnium. The hafnium element into the $SnO_2$ thin-films maybe acts to control the carrier concentration by suppressing carrier generation via oxygen vacancy formation. Furthermore, it can be also control the mobility. And bias stability of $SnO_2$-TFTs is improvement using doping hafnium. Enhancement of device stability was attributed to the reduced defect in channel layer or interface. In order to verify this effect, we employed to measure activation energy that can be explained by the thermal activation process of the subthreshold drain current.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.49-55
• /
• 2008

The face extraction is very important to provide the images of the roads and road sides without the problem of privacy. For face extraction form roadside images, we detected the skin color area by using HSI and YCrCb color models. Efficient skin color detection was achieved by using these two models. We used a connectivity and intensity difference for grouping, skin color regions further we applied shape conditions (rate, area, number and oval condition) and determined face candidate regions. We applied thresholds to region, and determined the region as the face if black part was over 5% of the whole regions. As the result of the experiment 28 faces has been extracted among 38 faces had problem of privacy. The reasons which the face was not extracted were the effect of shadow of the face, and the background objects. Also objects with the color similar to the face were falsely extracted. For improvement, we need to adjust the threshold.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.79-87
• /
• 2003

In this paper, we propose a method to obtain a linear characteristic using soft computing for systems which have array sensors of nonlinear characteristics. Also a procedure utilizing the pattern information of array sensors without additional sensors is proposed to reduce disturbance effects. For a typical example, even a single CdS cell for CdS array has nonlinear characteristics. Overall linear characteristic for CdS array is obtained using fuzzy logic for each cell and overlapped portion. In addition, further improvement for linearization is obtained applying genetic algorithms for the parameters of membership functions. Also the effect of disturbing external light changes to the CdS array can be reduced without using any additional sensors for calibration. The proposed method based on fuzzy logic shows improvements for position measurements and disturbance reduction to external light changes due to the fuzziness of the shadow boundary as well as the inherent nonlinearity of the CdS array. This improvement is shown by applying the proposed method to the ball position measurements of a magnetic levitation system.

• Lingua Humanitatis
• /
• v.1 no.1
• /
• pp.13-31
• /
• 2001

This essay seeks new possibilities in experimental thinking and to find ways in which philosophy can aid humanistic imagination. In emphasizing logical precision, philosophy has so far ignored the role of imagination in philosophical logic and limited itself to deductive logic. Despite the obvious fact that no degree of logical precision can fully account for, nor provide complete expression for, the vast range of human thought, other modes of thinking have suffered in the shadow of deductive logic. But these non-deductive models of thinking can in many cases better explain the emotive, aesthetic logic of the humanities. The kinds of models (deductive and non-deductive) in humanistic thinking include dialectic, abductive, analogic, pragmatic, inductive, and deductive logic. Each mode of logical thinking may be assigned a color that represents its emotive characteristics: red for dialectics (opposition): blue for abduction (transcendence); yellow for analogy (flexibility); green for pragmatics (peace); violet/purple for induction (fantasy); and finally orange for deduction (trust). And each mode can also be keyed to major areas in humanistic thought, making up the following connections: dialectic-red-history; abduction-blue-literature; analogy-yellow-philosophy ; pragmatics-green-religion ; induction-violet/purple-arts; and deduction-orange-science. These connections serve to illustrate the interrelationship between emotion and intelligence, leading us toward considerations of emotional intelligence and intelligent emotion. The former is increasingly gaining attention, as the effect of 'mood space' on intelligence is being scrutinized. That the rate of suicide among mathematicians is very high points to the need for careful study of the reverse relationship between emotion and intelligence, intelligent emotion. The need for the latter is all the more pressing, as the emergence of new technology is allowing, even forcing, us more and more to experience the world intellectually (i.e., sans emotive experience) through a new virtual space called cyberspace.

• The Research Journal of the Costume Culture
• /
• v.17 no.4
• /
• pp.561-574
• /
• 2009

Black has been the most important color of all since the ancient times when the recognition of black roused, as well as during most of the eras; and can especially be said as the main color which controlled the chronicles of fashion. The purpose of the study was to broaden the application of black color image make-up by inquiring into make-up design elemental characteristics of lines and textures, after classifying magazine illustrations and advertisement make-up images using black. The photos which made effective use of black among fashion illustrations, magazine advertisements after 2001 were classified in to each type, and make-up expression method and characteristics according to design element of each image type was analyzed. The conclusion of such study was the following. 'Erotic image' showed contrast effect between eye make-up and lip color by using pale tone or red color. 'Mannish image' emphasized form and texture of eyebrow by restraining the colors of eyelids with natural brown tone eye make-up; 'Modern image' expressed vague eyebrow to bring the sensation of the direction of eye shadow on eyelids and eye line as well as slant line to relief. 'Kitsch image' showed free and light imagery by creating unique hair style with various colors; expressing lips mostly with colors similar to skin tone or by restraining colors on lips. 'Decadence image' showed messy and foul sensation with unstandardized eye make-up and matt skin of shimmer, glossy and pale tone, also with black colored lips; 'Retro image' expressed reinterpretation of images from 1920${\sim}$1960 to contemporary styles.