• 한국약용작물학회지
• /
• 제15권3호
• /
• pp.194-198
• /
• 2007

청색과 황색의 4중직 폴리에틸렌 차광망을 해가림 피복물로 사용하여 해가림 색상이 4년생 인삼의 생육 및 진세노사이드 함량에 미치는 영향을 구명하고자 시험한 결과는 다음과 같다. 1. 청색 차광망의 spectral irradiance는 498nm에서, 황색차광망은 606nm에서 최고를 보여 색상에 따라 광질은 뚜렷한 차이를 보였다. 2. 청색 차광망은 황색 차광망보다 투광량이 23% 더 많았으며,기온도 0.3 $^{\circ}$C 더 높았고 여름철 투광량 증가로 인한 기온 상승으로 황색 차광망보다 지상부 생육이 억제되고 고온장해 발생이 심하였다. 3. 황색 차광망은 청색 차광망보다 엽록소 함량이 더 많고 경장 및 엽면적이 더 컸으며, 고온장해 발생율이 낮아 인삼수량은 48% 증가되었다. 4.동체부위의 총 진세노사이드 함량은 색상 간에 유의적인차이가 없었으나 지근 및 세근부위의 총 진세노사이드 함량은 청색 차광망이 황색 차광망보다 유의적인 증가를 보였다. 5. PD/PT비율은 지근부위에서만 청색 차광망이 황색 차광망보다 유의적으로 높았으며, Rb$_1$/Rg$_1$의 비율은 모든 부위에서 청색 차광망이 황색 차광망보다 높았으나 지근부위에서는 유의성이 없었다.

• 한국약용작물학회지
• /
• 제19권2호
• /
• pp.90-96
• /
• 2011

This study was conducted to examine major growth responses, the production and partitioning of dry matter on different growth stages, and yields and to select the optimal shading material in both quality and productivity of ginseng. Two cultivars of ginseng, Cheonpoong and Geumpoong, were cultivated in the paddy soil with three different shading materials; three-layered blue and one-layered black polyethylene (TBP), blue polyethylene sheet (BPS), and aluminium-coated polyethylene sheet (APS). Plant heights were linearly increased until June 24 and then maintained with showing higher height in Cheonpoong than that in Geumpoong cultivar. Root lengths were gradually increased until October 16. They were longer in Cheonpoong than that in Geumpoong cultivar, showing slightly longer with APS compared to TBP and BPS. The ability of producing dry matter of leaves was much higher from April to June compared to those of other growth periods, whereas its ability of root was concentrated from the end of June to the end of August. Among the shading materials, the ability of producing dry matter of shoot was higher with TBP than those with BPS and APS, while its ability of root was not appeared certain tendency unlike the shoot. The yield of ginseng roots was the highest with TBP among three shading materials and it was higher in Cheonpoong than that of Geumpoong cultivar. The shading materials which affect the light intensity and the temperature would be considered as an important factor to get better quality and productivity of Korean ginseng.

• 한국약용작물학회지
• /
• 제15권4호
• /
• pp.291-295
• /
• 2007

본 연구는 비누수 해가림 재배가 인삼 생육 및 품질에 미치는 영향을 구명하기 위하여 인삼의 차광재료를 비누수 해가림과 차광망을 이용하여 실험하였던 바, 얻어진 결과를 요약하면 다음과 같다. 1. 차광재료에 따른 맑은 날의 광량은 비누수해가림이 차광망에 비하여 낮은 경향이었고, 온도는 비누수해가림이 차광망에 비하여 $3{\sim}5^{\circ}C$ 낮게 나타났다. 2. 차광재료에 따른 3, 4, 5년근 인삼의 생존본수는 비누수해가림에 비하여 차광망이 낮게 나타났다. 3. 차광재료에 따른 인삼의 경태는 비누수해가림에서 증가하였고, 생근중도 비누수해가림이 차광망에 비하여 3년근에서는 5.0 g, 4년근에서는 10 g, 5년근에서는 8 g 높았다. 4. 차광재료에 따른 3, 4, 5년근 모두 수삼의 수량은 비누수해가림이 차광망보다 훨씬 높게 나타났다. 5. 차광재료별 3, 4, 5년근 수삼의 크기는 비누수해가림이 차광망에 비하여 대편이 많이 분포하였으며, 진세노사이드 함량도 비누수해가림이 차광망에 비해서 높았다

• Journal of Ginseng Research
• /
• 제12권1호
• /
• pp.87-91
• /
• 1988

일복개량의 일환으로 일복의 피복재선택을 위한 기초자료를 얻고자 적색광, 청색광 및 백색광하에서 미국인삼(Panax quinquefolin L.)의 광합성을 측정하였다. 광질별 광합성량은 전반적으로 적색과, 백색광 및 청색광 순으로 많았으며 그 광합성량의 차이는 조도가 증가할수록 감소되었다. 따라서 일복의 피복물 색상은 적색으로 하는 것이 인삼(미국인삼) 생육에 유이할 것임을 시사되었다.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.35-46
• /
• 2016

Purpose: This paper aims to analyse the composition system of architectural elements including shape, kinetic and material elements of kinetic facades and establish the design parameter system as a common conceptual and practical knowledge sharing platform with mechanical and electrical experts. Method: This research has been conducted in a three steps. At first, 120 cases of external shading devices are analyzed and their classification criteria have been established. Secondly geometric, kinetic and material elements are categorized in a common kinetic facade coordinates system considering environmental effects and operation method, and the applicability of combination of each element are tested. Lastly core design parameters for each element have been established in a common office building installation coordinate. Result: Geometry elements are categorized into seven geometric shapes and kinetic elements is categorized into basic linear and rotational motion and combinational folding and rolling motion. The combined set of parameters for three elements composes the whole design parameters for architectural elements of kinetic façade. Design parameters of shape elements are composed of shape, installation and arrangement parameters; design parameters for kinetic elements are composed of axis and range parameters; and design parameters of material elements are composed of thermal, lighting and color parameters.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.28-34
• /
• 2013

It is essential to reduce building energy consumption in office building because government enact policy which encourages building energy certification from 2013. Office building has high cooling energy demand due to large glazed area of facade in these days. Shading devices can be an alternative of reducing high cooling energy demand. So, this study simulated a variety of exterior venetian blinds to know how much building energy be affected by orientation and reflectance of slat. The results of this study are based on Seoul weather data. The following is a summary of this study. 1) As a slat of venetian blinds has the lower reflectance, the more building energy reduced. Reflectance is usually affected by color and material of slat. In case reflectance is 0.2 reduce 4% of building energy than reflectance is 0.8. 2) Horizontal exterior venetian blinds are more effective than vertical exterior venetian blinds in all of orientation. Horizontal shape is average 16% more effective in shading effect than vertical shape. 3) In this case study, the most effective shading device is low reflectance horizontal exterior venetian blinds that result about 18% building energy reduction than no shade model. The results of this research can be used to plan shading devices for energy conservative office building.

• 한국약용작물학회지
• /
• 제18권2호
• /
• pp.65-69
• /
• 2010

As cool-season plant, Panax ginseng C. A. Meyer is planted under shade-installation with tall front and low rear. However, at different planting positions, distinct differences come out because ginseng grows at the same position within 3~5 years and the growth circumstance changes a lot by the shade-installation. So, in this study, changes of temperature, photosynthesis and chlorophyll fluorescence with varieties of shading material and planting position were investigated. Light transmittances by polyethylene shade net and silver-coated shading plate as planting materials were measured according to different planting positions. Photosynthetic rate and chlorophyll fluorescence were measured by LI-6400-40 (Li-Cor). According to different planting positions, light intensity was higher in silver-coated shading plate than in polyethylene shade net, and higher at front than rear. Also, photosynthetic rate showed the same tendency, which had a positive correlation to light intensity. But this treatment caused a lower Fo compared with polyethylene shade net because of the stress by light and temperature. Also, Fv/Fm and ETR were higher in silver-coated shading plate. Fo was similar at front and rear according to silver-coated shading plate and ETR was higher at front.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.327-328
• /
• 2008

In this study, it was studied about the improved road light design for drivers and pedestrians using ray- or reverse ray-tracing method. Many of conventional road lights are not suitable for drivers and pedestrians because it has some serious problems such as glare effect or randomicity of illuminated areas. It was oriented from customary design method which was pointed at simple target such as luminance or electrical power. But it was not truth any more that the high luminance or electrical power consumption mean more bright and good road light. We studied ray-tracing method for road light reflector design to get the several goals. It means that good road light has easy for drivers and pedestrians eyes and illuminating objects on the road clearly. So, we set the design targets such as uniformity on the road area per one road light, shading angles and continuous luminance uniformity on the long distance road. We designed ideal road light conditions using ray-tracing method. We set the height of drivers and pedestrians eyes and calculated design guideline to make above design targets. Then we designed road light reflector using reverse ray-tracing method. And we achieved same luminance on the road almost half power consumption because we reduced loss of light. We achieved ideal design guide as 75 degrees of shading angles and 0.5 of luminance uniformity on the road area. Finally, we suggested reflector design for 250 watts power consumption CDM light source.

• 한국작물학회지
• /
• 제27권2호
• /
• pp.169-174
• /
• 1982

일복내의 광환경과 포장상태에서의 물질생산 실태를 파악하기 위하여 5년근 개체군의 층별(상, 중, 하층), 재식립치별(1, 3, 5행)로 맑은 날 및 흐린날 각각 일복내외의 조도를 측정하고 대상조도를 구하였으며 포장에서의 광합성 호흡속도를 측정하였다. 1. 개체군 상부와 조도는 1행이 상대적으로 높고 3, 5행간에는 큰 차이가 없었으나, 중앙부의 경우는 1, 3, 5행간에 뚜렷한 차이를 보였다. 2. 쾌청일에 비해, 맑으나 산광이 많은 날은 일복내 조도가 높고 흐린날은 낮았으나 외부조도에 대한 비율은 양자 모두 쾌청일보다 높았다. 3. 광합성속도는 행별로 차이가 커서 후행일수록 낮았다. 그러나 전행에서도 광합성 최대능력을 나타내는 것으로는 생각되지 않았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.154-159
• /
• 1995

To achieve a high aspect ration of metal contact, buried contact solar cell scribe the silicon surface using laser. The Q-switched NdLYAG laser which has 1.064$\mu\textrm{m}$ wavelength use for silicon scribing with 25~40$\mu\textrm{m}$ width and 20~200$\mu\textrm{m}$ depth capabilities. The 2~3% shading losses are very low campared to the screen printing solar cell. In this paper, we investigate the silicon scribing theory and pratice, scribing system for BCSC processing.