• 센서학회지
• /
• 제31권3호
• /
• pp.180-186
• /
• 2022

Photosynthetically active radiation flux density (PPFD) and daily light integral (DLI) values related to plant photosynthesis were obtained using the sunlight time and insolation data points in the agricultural weather sensor data for Jinan-gun, Jeollabuk-do, Korea from 2016 to 2020. The objective was to optimize the photo-environmental conditions for cultivating ginseng. The range of average monthly sunshine duration was 395.5-664.1 min, with the longest duration observed in June. The range of average annual accumulated daily insolation was 11.98-17.65 MJ·m^-2. The range of average daily external DLI calculated from the insolation and solar time data was 22.3-36.1 mol·m^-2·d^-1, and the annual cumulative DLI was 8,156-13,175 mol·m^-2·d^-1. Both the insolation and DLI values were the highest in 2016 and lowest in 2020. Based on the PPFD required for ginseng growth (111-185 µmol·m^-2·s^-1), the monthly average daily DLI and monthly cumulative DLI were 3.51-5.87 and 82-228 mol·m^-2·d^-1, respectively. The range of five-year average value for the external monthly cumulative DLI was 298-1,459 mol·m^-2·d^-1, and the monthly cumulative DLI values when a black double shading film and blue-white shading film were applied were 101-496 and 36-175 mol·m^-2·d^-1, respectively. A comparative analysis of DLI values indicated that shading was required to ginseng growth throughout the year under natural light. When the black double shading film was used, shading was required from March to October. When the blue-white shading film was applied from April to August, (i.e., the period with active ginseng growth) the appropriate DLI for ginseng growth could be continuously maintained. Regional weather differences due to climate change are gradually increasing, and even in one region, monthly and cumulative DLI values are different every year. Therefore, in order to implement a precise agricultural environment for ginseng cultivation, precise analysis and continuous research using agricultural weather sensor big data is required.

• 한국약용작물학회지
• /
• 제10권5호
• /
• pp.409-414
• /
• 2002

차광처리의 약광상태에서 더덕의 광합성속도에 영향을 미치는 주요 요인을 구명하여 물질생산에 관한 생리생태적 반응을 위한 기초 자료로 삼고자 본 실험을 수행하였던 바, 몇 가지 얻은 결과는 다음과 같다. 1. 차광처리한 더덕의 엽위별 광합성속도는 처리 후 44일째에 뚜렷히 증가하였으며, 그 증가 정도는 상위엽보다 하위엽에서 현저하였다. 2. 광합성속도와 비엽면적은 부(負)의 1차회귀직선 상태를 보여 차광하에서 잎이 얇아지는 경향이었으며 광합성속도와 기공전도도, 기공전도도와 SPAD는 모두 정(正)의 상관관계가 인정되었다. 3. 광합성속도를 종속변수로 하고 비엽면적(SLA), SPAD, 기공전도도, 수분퍼텐셜을 독립변수로 하여 중회귀분석을 한 결과, 4요인에 대해서는 중사관계수가 $r=0.848^{**}$로 나타났으며 기공전도도의 표준편회귀계수가 가장 높아 광합성속도에 가장 영향이 컸으며 그 다음으로 SLA, SPAD 및 수분퍼텐셜의 순이었다.

• 한국약용작물학회지
• /
• 제19권2호
• /
• pp.90-96
• /
• 2011

This study was conducted to examine major growth responses, the production and partitioning of dry matter on different growth stages, and yields and to select the optimal shading material in both quality and productivity of ginseng. Two cultivars of ginseng, Cheonpoong and Geumpoong, were cultivated in the paddy soil with three different shading materials; three-layered blue and one-layered black polyethylene (TBP), blue polyethylene sheet (BPS), and aluminium-coated polyethylene sheet (APS). Plant heights were linearly increased until June 24 and then maintained with showing higher height in Cheonpoong than that in Geumpoong cultivar. Root lengths were gradually increased until October 16. They were longer in Cheonpoong than that in Geumpoong cultivar, showing slightly longer with APS compared to TBP and BPS. The ability of producing dry matter of leaves was much higher from April to June compared to those of other growth periods, whereas its ability of root was concentrated from the end of June to the end of August. Among the shading materials, the ability of producing dry matter of shoot was higher with TBP than those with BPS and APS, while its ability of root was not appeared certain tendency unlike the shoot. The yield of ginseng roots was the highest with TBP among three shading materials and it was higher in Cheonpoong than that of Geumpoong cultivar. The shading materials which affect the light intensity and the temperature would be considered as an important factor to get better quality and productivity of Korean ginseng.

• 설비공학논문집
• /
• 제7권2호
• /
• pp.171-183
• /
• 1995

Generally, among many kinds of shading devices such as venetian blind, sunscreen, louver and curtain, venetian blind is using widely because the mechanism is so simple and easy to use solar insolation by controlling the slat angle. Analysis of time dependent heat transfer through the window with venetian blind is very important in order to use it effectivly. Therefore, in this study, theoretical thermal analysis method was developed to analyze time dependent heat transfer through a double pane window with and without venetian blind, and was made one module of TRNSYS(A Transient Simulation Program)program. By this way, it was analyzed that how much the variation of slat angle, slat colour and slat absorptivity of venetian blind would be affected on the heating and cooling load of building, and also which colour and angle of slat was optimal for the heating and cooling load of building.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.300-303
• /
• 2013

On BIPV systems, especially roof-top PV systems, the power generation is easier to be reduced due to the shades of facilities nearby, or roof itself. To secure profitability of roof-top PV systems, the optimal design of solar arrays through the precise shading analysis is an important item of design considerations. In this paper, an optimization system for array design of roof-top PVs is to be developed using three-dimensional Geospatial Information System(GIS). The profitability of income and expense is considered through the shading analysis of entire roofs. By applying the system to project for validation, the adequacy and the improvement of NPV of the system were verified compared to expert's design. The system has significance by reason that PV modules are placed through rules established with expert knowledge and geometric rules were applied to reflect the constructability and maintainability.

• 한국태양에너지학회 논문집
• /
• 제30권3호
• /
• pp.39-46
• /
• 2010

This study is focused on the effect of thermal load according to the various plan types in tower-type apartment in Korea. So, we chose the '』' type model in order to analyze the shading effect of the plan type. The main results are as follows. In chosen model, cooling energy demands are more sensitive than heating ones when is compared with the two methods. And there are about 10% deviations between new and conventional method. Because new method considers more detailed than conventional one about the building geometries. We also found that this building type affects to the about 3 floors from the top and it doesn't affect to the thermal load in lower floors. From these facts, we suggest new modeling method to the similar researches that will be analyzed the thermal load on the tower type apartment in Korea. Also there is no difference of the thermal load in each azimuth between simple and detailed modeling method. Consequently, we judge that this new method considered the shading effect will be used a lot to the similar analysis in tower type apartment in Korea.

• The Journal of Advanced Prosthodontics
• /
• 제6권6호
• /
• pp.451-455
• /
• 2014

PURPOSE. The most common failure seen in restorations with a zirconia core is total or layered delamination of the ceramic veneer. In the present study, the shear bond strengths between veneering ceramics and colored zirconia oxide core materials were evaluated. MATERIALS AND METHODS. Zirconia discs ($15{\times}12{\times}1.6mm$) were divided into 11 groups of 12 discs each. Groups were colored according to the Vita Classic scale: A3, B1, C4, D2, and D4. Each group was treated with the recommended shading time for 3 s, or with prolonged shading for 60 s, except for the control group. Samples were veneered with 3 mm thick and 3.5 mm in diameter translucent ceramic and subjected to shear test in a universal testing machine with a crosshead speed of 1 mm/min. One-way analysis of variance (ANOVA) and Tukey's HSD tests were used for comparisons of the groups having the same shading times. A paired t-test was used for groups of the same color (3 s/60 s). RESULTS. Among the 11 groups investigated C4 (3 s) had the highest bond strength with a value of 36.40 MPa, while A3 (3 s) showed the lowest bond strength with a value of 29.47 MPa. CONCLUSION. Coloring procedures can affect zirconia/ceramic bond strength. However, the results also showed that bond strengths of all the investigated groups were clinically acceptable.

• 한국태양에너지학회 논문집
• /
• 제25권2호
• /
• pp.27-33
• /
• 2005

To improve the performance of the top-positioning space in buildings, we suggested the environment-friendly system integrating various design techniques in the previous paper. This work discussed to calculate the length of PV considering a part of metallic radiators for radiative cooling, an critical element of the whole system, for shading not to prevent the PV on roof from generating electricity. In the process of calculating the shading area, we used the geometrical relationship between the sun-rays and the variable roof. For general applications, we utilized DL, the ratio of the length of PV and that of metallic radiator on roof, as a design factor, and then used the maximum insolation and the specific insolation($200W/m^2$) to decide the distance off the axis of rotation. As a result, for DL, we found out the reasonable value of 1.0 with full covering, 1.2 with 90%, and 2.0 with 70% in PV covering.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2000년도 학술발표논문집 ProceedingofBio-Environment control
• /
• pp.65-68
• /
• 2000

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1375-1376
• /
• 2011