• Current Photovoltaic Research
• /
• 제9권1호
• /
• pp.6-10
• /
• 2021

The mesh mask screen, which is generally used for screen printing metallization of silicon solar cell, requires high squeegee pressure and low printing speed. These requirements are acting as a limiting factor in production yield in photovoltaic industries. In order to improve the productivity, a metal mask, which has high durability and high printing speed, has been researched. In this paper, the characteristics of each solar cell, in which electrodes were formed by using a metal mask and a mesh mask, were analyzed through recombination current density. In particular, the metal-induced recombination current density (Jom) representing the recombination of the emitter-metal interface was calculated using the shading method, and the resulting efficiency and open-circuit voltage were analyzed through the diode equation. As a result of analyzing the proportion of the metal-induced recombination current density to the total emitter recombination current density, it was analyzed that the reduction of the metal-induced recombination current density through the metal mask is an important factor in reducing the total recombination current density of the solar cell.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.737-740
• /
• 2000

Injection molded plastic parts have many appearance imperfections: weld line sink mark flow mark, gloss, shading, scratching, etc. Because these appearance faults have not accepted esthetically, so pastic parts are produced through painting or texturing. The purpose of this paper is to develop a paintless molded part of TV Mask Front, using numerical simulations and experiments. In order to minimize problems of injection, this study carried out computer aided injection mold filling simulations using MF/FLOW. Based on these numerical results we developed FR(Flame Retardant) HIPS and estabilished guidelines of part design, mold design, and processing conditions. We took effects of cost savings, inprovement of productivity, and utilization of recycling by eliminated painting process.

• 소성∙가공
• /
• 제11권8호
• /
• pp.691-700
• /
• 2002

Injection molded plastic parts have many surface detects: weld line, sink mark, flow mark, gloss, shading, scratching, and so on. Because these surface faults have not been accepted esthetically, plastic parts are Produced through painting or texturing. The purpose of this paper is to develop a paintless molded part of TV Mask Front by flow control method and gas-assisted injection molding. In order to minimize defects from injection molding, this study was carried out using computer aided injection mold filling simulations using MF/FLOW and MF/GAS. Based on these numerical results, we developed FR(Flame Retardant) HIPS and established guidelines of part design, mold design, and Processing conditions. We have achieved of cost sayings, improvement of productivity, and utilization of recycling by eliminating surface defects and painting process.

• 전자공학회논문지A
• /
• 제28A권5호
• /
• pp.398-406
• /
• 1991

This paper presents a graphics accelerator for fast image generation. The accelarator has three major functional blocks: linear interpolator, multipliers and Edgee Painting Tree. Linear interpolator with coupled binary tree structure interpolates functional values of two end points. Two multipliers compute input values of interpolator in parallel. Mask pattern which removes out invalid data is generated by Edge Painting Tree. The proposed architecture in this paper is responsible for 64 pixels and can process about 5,900 10x10polygons per second.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.102-107
• /
• 2012

Halogen lamp was applied to fabricate the selective emitter crystalline silicon solar cell. In selective emitter structure, the recombination of minority carriers is reduced with heavily doped emitter under metal grid, consequently improving the conversion efficiency. Laser selective emitter process which is recently used the most generally induces the damage on the silicon surface. However the lamp has enough heat to form heavily doped emitter layer by diffusing phosphorus from PSG without surface damage. In this work, we have studied to find the design and the suitable condition for halogen lamp such as power, time, temperature and figured out the possibility to fabricate the selective emitter silicon solar cell by lamp heating. The sheet resistance with $100{\Omega}/{\Box}$ was lower to $50{\Omega}/{\Box}$ after halogen lamp treatment. Heat transfer to lightly doped emitter region was blocked by using the shadow mask.

• 대한의용생체공학회:의공학회지
• /
• 제20권2호
• /
• pp.155-164
• /
• 1999

본 논문에서는 화상 신호처리 및 컴퓨터 그래픽스 요소기술을 이용하여, 컴퓨터 상에서 인공고관절의 시술절차를 적용해 보기 위한 Simulated Implantation System (이하 SIS)을 소개한다 SIS는 일련의 자동화된 절차에 따라, 골반(pelvis)과의 접촉이 이루어지는 대퇴골의 상단부위인 고관절(femoral head)을 대체하는 과정을 3차원적으로 가상 수행할 수 있으며, 환자의 고관절과 인공고관절간의 정합정도를 수치적으로 해석할 수 있는 기능을 궁극적 목표로 하게 된다. 이를 위해 필수적으로 필요한 CT-Image를 이용한 고관절 영상의 3차원 재구성, 그리고 projection image글 이용한 인공고관절의 3차원 표현기법에 대해 논의하고, 각각에 대응되는 결과물들을 분석해봄으로써 현재 의공학 분야에서 절실히 요구되고 있는, 영상신호처리와 컴퓨터그래픽스를 이용한 SIS의 prototype에 대한 모습을 제시해 보고자 한다

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.28-30
• /
• 2009

This paper describes a 3-DTIP(3-D Tour Into Picture) using depth map for a Korean classical painting being composed of persons and landscape. Unlike conventional TIP methods providing 2-D image or video, our proposed TIP can provide users with 3-D stereoscopic contents. Navigating inside a picture provides more realistic and immersive perception. The method firstly makes depth map. Input data consists of foreground object, background image, depth map, foreground mask. Firstly we separate foreground object and background, make each of their depth map. Background is decomposed into polygons and assigned depth value to each vertexes. Then a polygon is decomposed into many triangles. Gouraud shading is used to make a final depth map. Navigating into a picture uses OpenGL library. Our proposed method was tested on "Danopungjun" and "Muyigido" that are famous paintings made in Chosun Dynasty. The stereoscopic video was proved to deliver new 3-D perception better than 2-D video.