• 현장농수산연구지
• /
• 제25권4호
• /
• pp.84-89
• /
• 2024

과수에서 생산량과 품질을 결정하는 조건 중 가장 중요한 것은 광이다. 차광은 광합성 효율을 떨어뜨리는 직접적인 원인으로 매실과 같이 생육기간이 짧은 과수에서 피해는 더 크게 나타난다. 본 연구에서는 최근 과수 주산단지에 일조방해에 의한 피해가 증가함에 따라 매실에서 차광조건이 생산량과 품질에 미치는 영향을 조사하였다. 차광시간이 증가함에 따라 매실의 평균 광합성 유효광선 (PAR) 조사량은 무처리 (304μmol/m²/s)에 비해 급격히 감소하여 8시간 차광에서는 142μmol/m²/s로 나타났다. 하루 중 광합성 효율이 최대(PAR 900~1,000μmol/m²/s)인 시간은 무처리와 차광 2시간은 5시간(오전 11시~오후 3시), 차광 4시간은 2시간(오후 1시~2시)이었으며, 6시간, 8시간 차광은 하루 종일 낮은 광량이 조사되었다. 차광시간에 따른 매실의 과중은 차광 2시간까지는 차이가 없었으나, 차광시간이 길어짐에 따라 유의하게 감소되었다. 산함량과 과형지수는 차광시간에 따라 유의한 차이가 없었으나 과실의 당도는 시간이 증가함에 따라 감소하였다. 결론적으로 매실의 2시간 이상의 차광은 과중과 당도를 떨어뜨리며 단위 면적당 생산량과 상품성 가치 하락에 직접적인 영향을 미친다.

• 설비공학논문집
• /
• 제24권1호
• /
• pp.61-69
• /
• 2012

Recently, tower type apartment has been a main stream at the apartment market, in Korea. Tower type apartment has features that is easy to maintain a proper distance between apartment buildings, and to keep a prospect comparing to flat type apartment However, there is usually a inner curved area at tower type apartment, and it is able to make an unhealthy environment because of shaded area through a day and a bad air flow. In this study, the duration of sunshine and the exterior air flow environments are examined. As results, the duration of sunshine at the inner curved area of tower type apartment was extremely short, and the exterior air flow environment was very bad for the low air velocity of about 0.08m/s. Installing pilotis in the 1st floor which faces to the inner curved area makes the good improvement of exterior air flow environment.

• Journal of International Society for Simulation Surgery
• /
• 제1권1호
• /
• pp.27-31
• /
• 2014

In this paper, an overview of segmentation and 3D visualization methods are presented. Commonly, the two kinds of methods are used to visualize organs and vessels into 3D from medical images such as CT(A) and MRI - Direct Volume Rendering (DVR) and Iso-surface Rendering (IR). DVR can be applied directly to a volume. It directly penetrates through the volume while it determines which voxels are visualizedbased on a transfer function. On the other hand, IR requires a series of processes such as segmentation, polygonization and visualization. To extract a region of interest (ROI) from the medical volume image via the segmentation, some regions of an object and a background are required, which are typically obtained from the user. To visualize the extracted regions, the boundary points of the regions should be polygonized. In other words, the boundary surface composed of polygons such as a triangle and a rectangle should be required to visualize the regions into 3D because illumination effects, which makes the object shaded and seen in 3D, cannot be applied directly to the points.

• 한국환경과학회지
• /
• 제27권10호
• /
• pp.875-881
• /
• 2018

To select fruit trees suitable for shaded urban garden with Elaeagnus umbellata var. coreana, Malus domestica 'Alps Otome', Malus domestica 'Fujii', Prunus mume, Prunus persica for. persica, Rubus fructicosus, and Vaccinium corymbosum 'Reka', leaf growth in response to different light was investigated two years after 35% shade treatment. Leaf area of E. umbellata var. coreana, M. domestica 'Alps Otome', P. mume, P. persica for. persica, and V. corymbosum 'Reka' increased in shading. Fresh weight of leaves make inconsistent response to shading in every species but dry weight of E. umbellata var. coreana and P. persica for. persica showed the highest 150% and 148%, increment, respectively. Althought leaf water content of E. umbellata var. coreana decreased in shading, there is no difference in P. persica for. persica. Chlorophyll value of E. umbellata var. coreana and P. persica for. persica that showed higher than any other species is correlated with dark leaf green. Compared to specific leaf weight of E. umbellata var. coreana, P. persica for. persica, and V. corymbosum 'Reka' showed lower than any other species in shading, that of M. domestica 'Fujii', and R. fructicosus increased in reverse. These results indicate that E. umbellata var. coreana and P. persica for. persica that showed high value in several invesetigaton items are suitable for shady urban condition considering leaf growth in response to shading.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1074-1083
• /
• 1993

본 연구에서 제시된 방법은 Fig.2(c)에 나타낸 방법으로 공구궤적의 검증과 더불어 NC공구궤적의 잘못된 부분과 정도를 찾아내 수정할 수 있도록하여 기존의 NC검증시스템의 비효율성을 해결하고자 했다.

• 한국조경학회지
• /
• 제15권2호
• /
• pp.79-90
• /
• 1987

This second consecutive research was connected to 7he previous first research with same title. The purpose of this research is to estimate the carrying capacity for the Seonjeong royal tomb and to propose its management planning. User's characteristics and relationship between user's density and vegetational environment were analized for the above objective. The result of this research shall be summarized as follows. 1. The site was damaged seriously by pupils and social groups'picnic activities concentrated in special periods of Friday and weekend during April and May. 2. Social-psychological carrying capacity estimation would be impossible due to lack of relationship between user's density and satisfaction. 3. Maximum user's density limits as a ecological carrying capacity was 1.4 persons per 100 square meters and modified optimum ecological carrying capacity was estimated as 1.0persons per 100 square meters. Maximum visitors as a optimum carrying capacity of the Seonjeong royal tomb area was estimated as 6,000 persons when supposing the proposed landuse planning. 4. To restore and preserve the tomb landscape as a traditional historic site, Seonjeong royal tomb shall be managed by three landuse areas ; protection and control area, natural picnic area and shaded picnic area. And the protection and control area include three sites ; natural reclamation site, natural preservation site and tomb landscape conservation site.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.77-84
• /
• 2013

In this paper, we review two-dimensional measuring methods referring to target patterns. The patterns consist of two linearly-repeated patterns or is designed repeatedly in two-dimension. The repeated properties are reflectivity, refractivity, air-gapping distance, capacitance, magnetic reluctance, electrical resistance and sloping gradient, etc. However, the optical methods are generally used for high speed processing and density, and their encoding principles are treated here. In case of two-dimensional pattern, as there is not inherently error between single units encoding the pattern except for the metrology frame errors, the end-effector position of an object accompanying the pattern can be measured with respect of the global frame without via error. Therefore, it is regarded as a substitute for laser interferometer with severe environmental constraints and has been applied to the high-accurate planar actuator.

• 생물환경조절학회지
• /
• 제4권2호
• /
• pp.223-231
• /
• 1995

여름철 온실 온도환경의 효율적인 제어는 온실의 주년재배와 고도활용을 위한 가장 중요한 당면과제이다. 따라서 본 연구는 우리나라 31개 지역의 기후자료를 분석하여 고온기 온실의 기온관리에 있어서 목표 온도 유지를 위한 지역별 적정 최대환기횟수를 결정함으로서 온실의 기온관리를 위한 기본적인 자료를 제공하고자 실시하였다. 그 결과 여름철 유리온실의 설정온도 유지를 위한 강제환기는 40% 차광 유리 온실에서 최대환기횟수 1회/min로 35$^{\circ}C$ 유지가 가능하였으나 환기만에 의한 한계 최고실온 3$0^{\circ}C$ 유지는 불가능하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.205-210
• /
• 2006

With the development of recent technology such as telematics, LBS, and ubiquitous, the applications of 3D GIS are rapidly increased. As 3D GIS is mainly based on urban models consisting of the realistic digital models of the objects existing in an urban area, demands for urban models and its continuous update is expected to be drastically increased. The purpose of this study is thus to propose more efficient and precise methods to construct urban models with its experimental verification. Applying the proposed methods, the terrain and sophisticated building models are constructed for the area of $270,600m^2$ with 23 buildings in the University of Seoul. For the terrain models, airborne imagery and LIDAR data is used, while the ground imagery is mainly used for the building models. It is found that the generated models reflect the correct geometry of the buildings and terrain surface. The textures of building surfaces, generated automatically using the projective transformation however, are not well-constructed because of being blotted out and shaded by objects such as trees, near buildings, and other obstacles. Consequently, the algorithms on the texture extraction should be improved to construct more realistic 3D models. Furthermore, the inside of buildings should be modeled for various potential applications in the future.

• 한국환경과학회지
• /
• 제7권1호
• /
• pp.112-115
• /
• 1998

During the spring and fall of 1994 and winter of 1995, the exposure time of periphyton biomass on terval. In the streams with low periphyton biomass (chi. a: 2-4 mg/$m^2$) in natural rocks, biomass of arttificial substrata (unglazed tile: $3.7{\times}9.5{\times}2 cm$) exceeded that of the natural rocks after 28 days, while sites with high biomass (chi. a: 20-60 mg/$m^2$) in natural rocks showed slower biomass accumulation after 40 days. Due to the high licht input and temperature in a Partially shaded mountain stream, development of periphyton biomass in spring occurred faster than that of winter. In general, development of periphyton biomass placed on artificial substrata took 4-5 weeks in spring and at least 6 weeks In winter to reach the natural level.