• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.3
• /
• pp.314-321
• /
• 2005

Objectives. The purpose of this study was to compare the shade changes in wet and dry conditions of natural teeth using two different intra-oral colorimeters. Materials and methods. Twenty volunteer subjects have no restorations and fillings in the maxillary central incisors were involved in this clinical study. The color of tooth was measured by two different instruments that were a Shade $Scan^{TM}$ System and a VITA $Easyshade^{(R)}$, Five times consecutive measurements were done for each subject with both instruments. Groups of measurement are an initial wet condition as control, dry in 5 minutes, 15 seconds after re-wetting with saliva, re-wetting after 5minutes and re-wetting after 30 minutes. Using ShadeScan $System^{TM}$, tooth image was captured and converted to the mapping image of Vitapan 3D master. Three main shades were chosen from each subject and calculated the area in Global Lab Image software. Data were analyzed using paired T-Test and Wilcoxon Signed Ranked Test. Using VITA $Easyshade^{(R)}$, color differences($\Delta$E) between measurements were analyzed with one sample T-test. Results. Using ShadeScan $System^{TM}$, there were significant differences between control group and dry(P=.023), dry and re-wetting 15 seconds, 5 minutes, 30 minutes as well(P=.021, P=.017, P=.030) in comparison of primary shade. However, comparing three main shades, there was no significant difference between control and dry(P=.105). Using VITA $Easyshade^{(R)}$, color differences($\Delta$E) between control and dry, dry and re-wetting 30 minutes were statistically different(P=.002, P=.022). Conclusion. Primary shade could be changed in dry and wetting procedure in time, however there was no significant shade changes in overall.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.147-159
• /
• 2000

The purpose of this study was the evaluation of spectral transmission of the commercial three shade guides and the relationship of hue, value, and chroma according to the transmission rate. The spectral transmittance of three shade guides - Vita Lumin Shade Guide, Vintage and Unibond Shade Guide, and Vitapan 3D-Master Shade Guide - were measured. For direct transmission measurements, each shade tabs were placed at the entrance port of the 1mm diameter intergrating sphere. The intensity of the light source passing through the shade tabs to the right angle was continuously recorded for wavelength from 400 to 700 nm. A transmission spectrum and digital data were obtained for each measurement and they were evaluated using Microcal Origin program. The obtained results of this study were as follows : 1. In Vita Lumin Shade Guide, sum of the transmission rate of the shade tabs at the wavelength 400-700nm was decreased in agreement with the arrangement order at each A, B, C, D group, except D4 shade tab. However, there were no relationships between the transmission rate of the shade tabs and the value-oriented. 2. In Vintage and Unibond Shade Guide, sum of the total transmission rate of the shade tabs was decreased in agreement with the arrangement order at each A, B, C, B group. When all shade tabs arranged in value-oriented, transmission rate was accord with the order, except D4 shade tab. 3. When shade tabs of the Vitapan 3D-Master Shade Guide have the same value and hue, sum of their total transmission rate decreased in accordance with the chroma-oriented. When the shade tabs have the same value and chroma, there were no differences from the order of the transmission rate to the various hue type. However, in the 'R' tabs of reddish hue type, the transmission rate increased at the long wavelength range area. In conclusion, we need the quantitative analyzing instruments in transmission determination. Vitapan 3D-Master Shade Guide covers the tooth color space taking into account the parameters of the systematic value, chroma, hue oriented, and the transmission rate relatively accorded with that sequence.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.17 no.1
• /
• pp.23-30
• /
• 2008

Application of CAD/CAM is changing the way partial or full veneer all ceramic restoration is made. CAD/CAM systems, which were used mainly in other industries, have been developed and introduced for the dental purposes recently. It produced a flood of information on the CAD/CAM systems. It also influenced the development of restorative materials and all ceramic is substituting the traditional restorative materials of gold, composite resin and metal. Price increase of gold and other raw materials made the all ceramic more appealing. The introduction of a CEREC 3D system was innovative in several ways. Image of the prepared tooth is captured by camera and impression taking is unnecessary. Restoration can be delivered to the patient on one appointment and it will satisfy the demand of busy patients. One-day treatment with direct CAD/CAM system saves time compared to indirect CAD/CAM system. More superior restoration can be produced if lab work such as the adaptability check and shade selection is cooperated with lab technician. Short working time and comparably superior shade compatibility of color block was close to ideal. In the future, restorations with better quality can be fabricated in less time to busy patients thanks to the development of CAD/CAM system and dental materials.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.13 no.2
• /
• pp.13-24
• /
• 2004

In everyday dental practice, one of the most important procedures is fixed prosthodontics which includes gold and ceramic restorative treatments. This procedure can be divided into tooth preparation, impression taking, laboratory work, occlusal adjustment and cementation. The first step is tooth preparation and it needs not only good techniques but also deep knowledge and understanding of oral biology. Also, there must be good knowledge of the principles and materials of the procedure. The patient's satisfaction can be achieved from natural contour, good shade, and precise margin fit, especially in ceramic restorations on anterior regions. It is essential to fastidiously prepare the tooth to make aesthetic restorations with a good margin fit. Tooth preparation techniques and three case reports of ceramic restorations on the anterior region are presented and discussed in this paper.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.8 no.1
• /
• pp.84-89
• /
• 1999

These days, Dental Technic has been contributed to make more delicating Dental Prosthesis Restoration for patient and dentist. Diagnostic wax-up and making Temporary Crown are emphasized as an important part of Dental Technic. Choosing suitable Material and working with various new Equipments like Microscope improve accuracy. Repeated practice by setting up an organized system gives better result. Also, Esthetic Prosthesis requires patient's appearance and personality as well as patient' age, sex, and shade so on. Moreover, the problem which occurs by the patient's oral condition ha to be discussed before taking final impression. At a time like this, Scientific-mind and Logical thought Ability should be considered the important issue for more progressive Dental Technic.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.449-456
• /
• 2009

Image processing has been applied to steel bridge defect recognition since 1990s. Compare to human visual inspection, image processing provides a more objective and accurate way of assessment. Since shade and shadow may sometimes occur when taking bridge coating images, non-uniform illumination problems should be considered. By means of color image processing, this paper aims to mitigate the illumination effect for bridge coating assessment. Furthermore, the adaptable ellipse method (AEM) is proposed to recognize mild rust colors. Finally, AEM will be compared to the K-Means algorithm, a popular recognition method, to show its advantage.

• Safety and Health at Work
• /
• v.7 no.3
• /
• pp.208-212
• /
• 2016

Background: Outdoor workers are at risk of high ultraviolet radiation exposure, and may have difficulty using sun protection. The objectives were to determine the prevalence of sun protection behaviors in a sample of outdoor construction workers, and to assess which factors predict better sun protection practices. Methods: Participants were recruited via construction unions. Workers answered a questionnaire on demographics, skin cancer risk, sun protection behaviors, and job. Sun protection behavior scores (from questions on sunscreen use, sleeved shirt, hat, shade seeking, sunglasses) were calculated by converting Likert-scale answers to scores from 0 to 4, and taking the mean (separately for work and leisure). Determinants of sun protection behavior scores were examined for work and leisure using generalized linear models. Results: Seventy-seven workers had complete questionnaire data (participation 98%). Sun protection behaviors used most often were hats (79% often/always) and sleeved shirts (82% often/always); least prevalent were shade-seeking (8% often/always) and sunscreen (29% often/always). For both work and leisure scores, the strongest predictor was skin type, with fairer-skinned individuals having higher sun protection behavior scores. Workers had higher scores at work than on weekends. Workplaces that required hats and sleeved shirts for safety purposes had higher protection behavior scores. Conclusion: This high-participation rate cohort helps characterize sun protection behaviors among outdoor workers. Workers practiced better sun protection at work than on weekends, suggesting that workplace policies supportive of sun protection could be useful for skin cancer prevention in the construction industry.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.1
• /
• pp.88-103
• /
• 2019

This paper aims to identify planting design for the renewal of Okgu Park, located in Siheung, Gyeonggi-do. I designate planting concept fit spatial functions and also suggest planting designs that are proper for a growth environment. The spatial functions of the research site are divided on the basis of the park facilities, its surroundings, and usage. To understand the planting concept, this paper looks into the distribution of plant species and the precise planting structure. To understand the planting concept and the current usage of shade space in the park, I examine the distribution of plant species and the precise planting structure. There are 48 kinds of plants, with Zoysia japonica area (28.84%), Prunus yedoensis (8.0%), Pinus thunbergii (6.73%) and Zelkova serrata (6.38%) taking up the majority. 27 places were chosen for researching the precise planting structure. The research shows that the average green coverage ratio is 38.14% and the average green capacity coefficient is $0.72m^3/m^2$. The growth defective rate of trees in the shade areas is estimated by averaging the classified growth conditions of individual trees per block of shade areas. Areas with an inferior environment for growth and low spatial usage in Okgu Park are selected as subjects for planting design. After comparing the spatial functions with planting concepts and analyzing the growth of plants, I identify $36,236m^2$ areas with inferior growth condition. I also examine structures and the surrounding areas to find areas that require urgent planting improvement, specifically identifying landscape space and shade space around the fountain and the buffer space nearby the North gate. I rearrange spatial functions in the selected areas to devise a planting design considering the existing vegetation, layer structure, and its usage. I set the planting concept and direction to improve the landscape of the selected areas through implementing a planting design so the park users can be satisfied with each space.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.22 no.1
• /
• pp.67-73
• /
• 2013

The word 'aesthetic', one of three functions of the teeth - mastication, pronunciation, and aesthetic - does not simply mean beauty. Aesthetic missing harmony cannot be called aesthetic. It is true aesthetic when the harmony with surrounding teeth and environment such as lips, midline, and facial form is achieved. In order to produce a harmonious prosthesis, sufficient information must be passed on to a technician, and also the technician should request necessary information to the dental office. Good food cannot be made without fresh ingredients. Although fresh ingredients are supplied, delicious food is also not possible without a chef's cooking skills. The first-class dish is made only under the circumstances that a skilled chef can do his best with fresh ingredients. In this study, the teamwork to be shared between dental practitioners and technicians for harmonious aesthetic prosthesis is discussed.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.6
• /
• pp.413-422
• /
• 2015

PURPOSE. To identify the most frequent natural tooth colors using the Easyshade Compact (Vita -Zahnfabrik) spectrophotometer on a sample of the Spanish population according to the 3D Master System. MATERIALS AND METHODS. The middle third of the facial surface of natural maxillary central incisors was measured with an Easyshade Compact spectrophotometer (Vita Zahnfabrik) in 1361 Caucasian Spanish participants aged between 16 and 89 years. Natural tooth color was recorded using the 3D Master System nomenclature. The program used for the present descriptive statistical analysis of the results was SAS 9.1.3. RESULTS. The results show that the most frequent dental color in the total sample studied is 3M1 (7.05%), followed by the intermediate shade 1M1.5 (6.91%) and 2L1.5 (6.02%). CONCLUSION. According to the research methodology used, and taking into account the limitations of this study, it can be proposed that the most frequent color among the Spanish population is 3M1; the most common lightness group is 2; the most frequent hue group according to the 3D Master System is M and the most frequent chroma group is 1.5.