• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.191-202
• /
• 2007

Statement of problems: Long-term success of esthetic restorations, depends on various factors, especially on color stability of the restorations. The color stability is affected by resin cements beneath the porcelain laminate veneers. Purpose: The purpose of this study was to comprehend the color stability of resin cements by comparing with 4 different kinds of resin cements (Choice, Variolink II, Nexus 2, Rely-X). Material and methods: Porcelain laminate disk samples were luted with resin cements. After thermocycling of each 1000, 2000 and 3000 cycle, specimens were measured by spectrophotometers and the color differences were. Results: 1. After thermocycling of 1000, 2000 and 3000cycle, color difference, $({\Delta}E^*)$ of all specimens were incresed, but were not statiscally significant differences. 2. In the Choice of A1 shade and the Nexus 2 of A3 shade, color difference$({\Delta}E^*)$ after thermocycling of 3000cycle was $incre^*ased$ significantly than after thermocycling of 1000cycle. However, other groups did not show any statistically significant differences (P<0.05). 3. After thermocycling of 3000cycle, color difference$({\Delta}E^*)$ between A1 shade and A3 shade of Nexus 2 showed statistically significant difference. However no statistically significant differences were observed in other groups (P<0.05). 4. The mean of color difference$({\Delta}E^*)$ is 1.0-2.06 after 3000 thermocycling and the data were ranked in the ascending order of Variolink II, Nexus 2, Choice and Rely-X in A1 shade group and Choice, Rely-X, Variolink II and Nexus 2 in A3 shade group. Conclusion: Above results revealed that, after 3000 thermocycing, the color difference $({\Delta}E^*)$ of experimental resin cements was within clinically acceptable ranges. Color stability of 4 different resin cements was comparatively excellent.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.175-185
• /
• 2018

Purpose: The aim of this clinical study was to evaluate the efficacy and safety of a self - applied paint - on whitening gel combined with wrap to increase the effect of a whitening gel and minimize gingival irritation. Materials and Methods: Ninety adult volunteers were randomly treated to a control group and two experimental groups using whitening gel containing 2.8% and 3.0% hydrogen peroxide for 30 persons each. They had used the wrap and whitening gel on maxillary 4 anterior teeth for 30 minutes per day during 2 weeks. Whitening tooth color response was measured by VITA shade guide and ShadeEye $NCC^{(R)}$. And side effects were assessed from interview and intraoral examination. The efficacy and safety evaluations were statistically analyzed. Results: In the evaluation with VITA shade guide, there was significantly the whitening effect in experimental groups compared with the control group. In the evaluation with ShadeEye $NCC^{(R)}$, the 3.0% experimental group showed significantly the whitening effect compared to the control group and the 2.8% experimental group (P < 0.05). There were some complaints of minor side effects, but there did not find abnormal symptoms of the gingival stimulation in all groups. Conclusion: A self - applied paint - on whitening gel combined with wrap can be used as a useful self-whitening material because the whitening effect increases as the concentration of hydrogen peroxide from 2.8% to 3.0% and also no significant side effects are observed.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.2
• /
• pp.118-123
• /
• 2013

This study was carried out to select optimal shade materials among four-layered polyethylene (PE) net (FLPN), aluminium-coated PE sheet (APSS), and blue PE sheet (BPSS) in condition of paddy field cultivated 6-year-old ginseng. The order of light-penetrated ratio and air temperature by shade materials was BPSS > APSS > FLPN. Light-penetrated ratio of BPSS before two fold shade was more 3 times and 2 times than that of FLPN and APSS, respectively. Air temperature of BPSS was also higher $1.6^{\circ}C$ and $1.4^{\circ}C$ than that of FLPN and APSS, respectively. BPSS showed good cultural environment because all of light-penetrated ratio and air temperature were become higher in spring and fall season but lower in summer season by additional shade with two-layered PE net. Survived-leaf ratio was highest in BPSS and lowest in FLPN causing a little water leak on a rainy day. Rusty-root ratio was also highest in FLPN because soil moisture content was increased by water leak. The order of root yield was BPSS > APSS > FLPN, and the cause of highest yield in BPSS was higher light-penetrated ratio during spring and fall season, higher survived-leaf ratio, and lower rusty-root ratio than that of APSS and FLPN. BPSS showed highest total ginsenoside content because of high light-penetrated ratio, blue light effect, and the difference in dry matter partitioning ratio such as low taproot ratio, and high lateral root ratio.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.409-419
• /
• 2008

Statement of problem: At all times people have tried to fabricate tooth restorations using tooth colored materials. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. The basic color of zirconia is white to ivory. The color can be partially adapted by veneering it with ceramic materials. However, it would be better if the substructure could already be adapted to the basic color shade of neighboring teeth. By adaptation to the basic shade, it can help to reduce the necessary layer thickness of the veneer ceramic to achieve the desired color. Purpose: The purpose of this study was to spectrophotometrically evaluate the influence of shading of zirconia core on the final shade of all-ceramic restorations using the CIE $L^{*}a^{*}b^{*}$ system. Material and methods: Core specimens (n = 20 per group) of Lava Frame Zirconia, KaVo Everest Zirconia, Digident CAD/CAM Zirconia were fabricated at 20 mm in diameter and 0.5 mm in thickness. Halves of each groups were shaded in A3 color. These core specimens were veneered with A3 porcelain of the recommended manufacturer at thickness of 0.5 mm. CIE $L^{*}a^{*}b^{*}$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan) at 0.5 mm, 0.4 mm, 0.3 mm in thickness. Color differences were calculated using the equation ${\Delta}E^{*}=[({\Delta}L^{*})2+({\Delta}a^{*})2+({\Delta}b^{*})2]1/2$. Results: 1. In the case where porcelain layer has a thickness of 0.5 mm, Lava Frame Zirconia and KaVo Everest group did not show clinically perceived color difference, however Digident CAD/CAM Zirconia group showed clinically perceived color difference according to shade allowed on core. 2. When the thickness of porcelain layer decreased from 0.5 mm to 0.4 mm, Lava Frame Zirconia and KaVo Everest group did not show clinically perceived color difference, on the other hand Digident CAD/CAM Zirconia group showed clinically perceived color difference according to shade allowed on core. 3. When the thickness of porcelain layer decreased from 0.5 mm to 0.3 mm, clinically perceived color differences were observed from all three groups. Conclusions: Ziroconia system, which is possible to allow shade on core, are thought to be much more favorable to reproduce natural shade compared to systems that is impossible to give shade. Therefore, clinicians ought to choose adequate system for certain clinical situation by considering above specific character.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.397-406
• /
• 2009

This study was carried out to investigate the microclimate (photosynthetically active radiation and temperature) response to different shading materials(shade plate, and polyethylene net) on Korean ginseng(Panax ginseng C.A. Meyer) bed. Photosynthetically active radiation(PAR) under polyethylene net was approximately 24 ~ 30% higher than that under shade plate on sunny day. Also, PAR was remarkably decreased from the front to the rear rows of ginseng beds. Temperature under polyethylene net was higher than that of shade plate. Internal temperature under polyethylene net was 1.9 ~ 3.1% higher than that under shade plate at the different rows of ginseng bed. Mean of total daily temperature under polyethylene net was higher at the rear rows than at the front rows, while that under shade plate was higher at the front rows than at the rear row of ginseng bed. Mean of total daily temperature on sunny days(April 15 and May 17) was 7.3% lower under shade plate than above outside but, polyethylene net was 0.7% high, while that on cloudy days(April 11 and May 15) was 1.6% higher under polyethylene net than above outside, but shade plate was 0.7% low. Also, overall mean of total daily temperature under polyethylene net was 7.0, 7.8, and 8.8 % on sunny day(April 15 and May 17), and 1.7, 1.6, and 3.5% on cloudy day(April 11 and May 15) higher than that under shade plate, respectively. The SPAD values of 6 years old ginseng at two point(front, center) in bed under shade plate showed the highest value, and the lowest under polyethylene net. The SPAD of 6 years old ginseng at rear in bed was not statistically significant under two shading materials.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.180-187
• /
• 2001

The structure of current guides is largely illogical and without any rational use of color ordering. The shade guides are generally made of plastic (rather than the actual composite material) and do not accurately depict the true shade. translucency. or opacity of the composite resin after polymerization. To solve this problem, information based on evaluations of natural teeth and material that use the same method and experimental conditions is necessary. The present investigation measured the color of natural maxillary anterior teeth in vivo and compared the results with those of composite resins. 269 Korean subjects were selected for this study. Intact central incisor. lateral incisor. and canine were selected. The clinical crowns were free of caries or restorations. The middle site of the coronal portion on the labial surface of the tooth was measured by Chroma Meter. The five light activated. resin-based materials (Amelogen, Denfil, Elitefil, Spectrum, Z100) were used in this study. Resin composite was condensed into plastic mold with a diameter of 8mm and a thickness of 4mm. pressed between glass plates to flatten the surfaces. and polymerized using a Visilux II visible light activation unit. The surfaces were polished sequentially on wet sandpaper. Color measurements of each specimen were accomplished by Chroma Meter. A computer program that compares each tooth color with each composite resin color was written and the minimum CIELAB color difference ($\Delta$E$^*$) between tooth and each material was calculated. Under the conditions of this study: 1. Teeth tend to become darker with advancing age. 2. Canines were darker. more yellow. and less green than incisors. 3. The teeth from the women were lighter. more green. and less yellow than the male teeth. 4. In general. composite resins were lighter. more green. and less yellow than teeth. Deficiencies were noted in Hues in YR range. 5. Mean color differences between the five composite resin products and teeth were detectable to the naked eye($\Delta$E$^*$>1.0). 6. In comparing the mean $\Delta$E$^*$ values of materials. Spectrum showed the least followed by Z100, Elitefil, Amelogen, Denfil in increasing order.

• Journal of dental hygiene science
• /
• v.15 no.4
• /
• pp.407-412
• /
• 2015

This study investigated flexural properties of indirect Gum-shade composite resins for esthetic improvement. The material utilized in this study was Crea.lign, Twiny flow and Twiny paste (TP). Ten specimens were fabricated with a dimension of $25{\times}2{\times}2mm$ according to the ISO 4049. After fabrications, specimens were stored in the distilled water for 24 hours at the temperature of $37^{\circ}C$. Three-point bending test was performed in universal testing machine (Instron 3344; Instron, USA) at a crosshead speed of 1 mm/min until the failure occurred. TP exhibited a higher flexural strength (FS) and flexural modulus (FM) compared to the flowable materials. There were significant differences among the three materials in FS and FM. However, there was no significant difference in work of fracture (WOF) in all tested materials (p>0.05). In Weibull analysis, TP showed the greatest Weibull modulus which means a higher reliability of the materials. Also, Gum-shade composite resins revealed a strong correlation in all flexural properties. There was a positive correlation in FS-FM ($r^2=0.99$) and a negative correlation between FS-WOF and FM-WOF ($r^2>0.97$). Therefore, this confirmed that flexural property was important for mechanical behavior evaluation and useful information. To addition, this improved among mechanical properties correlation of materials as important factor.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.2
• /
• pp.139-148
• /
• 1987

Exochorda serratifolia, broad-leaved shrub has beautiful flowers and is resistant to cold, shade and decease. New this native plant is considered to be worth being exploited as the outstanding plant for landscaping and horticulture. So this study was executed to utilize Exochorda serratifolia as the planting material for landscaping and horticulture through the survey of its habitat environment and the experimennt of its seed physiology and germination, vegetative propagation, culture and utilization, etc.. The results are as follows ; 1. The color of the flower is white, blooming in the early and middle of May and the seeds ripen late in Sep.. 2. The elevation, elevation, gradient and direction of the native habitat were 250m, 20-25$^{\circ}$and northern side respectively. 3. The soil pH of the natural habitat was 5.3 and soil fertility was poor. 4. Exochorda serratifolia appeared as indicator within P. densiflora community and its neighboring species were Q. mongolica, Q. dentata, R. mucronulatum, L. obtusiloba, E. oxyphillus, C. heterolphylla, var thunbergii, etc.. 5. The optimum temperature for seed germination was found at 20$^{\circ}C$ and the longer the stratification period at 5$^{\circ}C$ was, the lower the germination rate was. 6. The treat merits of GA and Kinetin increased the seed germination rate, especially under the dark condition but their high concentrations decreased the seed germination rate. 7. The rooted rate of the greenwood cutting was the highest at IBA 100ppm plot of vermiculite bed but its high concentration decreased the rooted rate conspicuously. 8. In the tissue culture, the each 1.0 ppd plot of NAA, Kinetin and NAA 1.0ppm + Kinetin showed the best growth. And the mixture of NAA 1.0ppm and Kinetin showed better growth than the single treatment of NAA or Kinetin did. 9. Transplanted Exochorda serratifolia showed healthy growth with shaded environmental condition(42.1% light intensity), therefore they can be cultivated as a shade tolerant landscape plant. 10. It was considered that Exochorda serratifolia was applicable to group planting at shade places or under trees in parks, homes, etc..

• The Journal of the Korean dental association
• /
• v.49 no.4
• /
• pp.203-210
• /
• 2011

The aims of this study were to evaluate the adequate thickness of opaque resins for situations such as an oral black cavity and discolored tooth structure, as well as the translucency of each opaque material at various thicknesses. Six opaque-shade composite resins (Z-350 OA3, Amelogen Universal A2O, Esthet-X A2O, Esthet-X A4O, Charmfil UO and Aelite Universal OA3) were prepared in metal molds with a hole of 8 mm in diameter and various thicknesses (0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0 mm and 4.0mm). Four backgrounds (white tile, black tile, C4 shade porcelain and opaque resin itself) were used to determine the translucency parameter (between black and white backgrounds). and to mimic a black oral cavity (between black and opaque resin backgrounds) and a discolored tooth structure (between C4 and opaque resin backgrounds). Color measurements were made by a colorimeter to determine the CIELAB values of each specimen with each background and to calculate the translucency parameter and ${\Delta}E^*$ value difference among the specimens on the backgrounds. The translucency parameter and ${\Delta}E^*$ obtained between black and opaque resin backgrounds decreased in similar pattern as thickness increased. A C4 background was masked by resin thicknesses of 0.5-1.0mm, while a black background required thicknesses of 1.0-2.0mm. Adequate knowledge about differences in the optical character like translucency of the materials used is essential, together with the accumulated experience of the individual clinician.

• Asian Journal of Turfgrass Science
• /
• v.18 no.3
• /
• pp.129-139
• /
• 2004

This study conducted to find out the best way to prolong green period of Zoysiagrass and Cool-season grass from 1999 to 2001 in Korea. Treatments were control, vinyl, black shade net, green shade net, black shade net+vinyl, green shade net+vinyl, vinyl+black shade net, and vinyl+green shade net for Zoysiagrass. For cool-season grass, treatments were control, non-punched vinyl and punched vinyl. Data on temperature, light intensity, humidity, leaf color and chlorophyll were collected. Plot size was 2 by 2 and the experiment was conducted using completely randomized design with three replication. Zoysiagrass Green period of Zoysiagrass depended on temperature and light intensity than humidity. Effective method of prolongation of green period in Zoysiagrass was to covered it with vinyl during early October to early November, and then using vinyl+black shade net from end of November. Cool-season grass Effective method of prolongation of green period in Cool-season grass was by covering it with vinyl during mid-November to mid-December, and then using vinyl+black shade net from end of December.