• 산업공학
• /
• 제22권1호
• /
• pp.85-94
• /
• 2009

Nowadays, most of the major manufacturing companies prepare their manufacturing schedule using package based solutions. Even though the accuracy of the detail scheduling result is high at implementation, however, it is low during maintenance period. The main cause of low accuracy during maintenance period is due to difficulties in maintaining the accurate level of master data. In this paper, we propose to easily maintain setup time, which is one of the most important factors required in master data to achieve good scheduling result, after changing job. This paper is mainly focused on how to deduce the factors that influence the setup time in a roll-based manufacturing field with print operations. For this purpose, we employed rule based algorithm and applied for deciding setup time for the existing product items. Likewise, it can be applied to new items without any complex setup procedures, and, finally, it displays the result of the real setup-time and calculated setup-time.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2006년도 제33회 추계학술대회 발표논문집
• /
• pp.117-117
• /
• 2006

• 한국멀티미디어학회논문지
• /
• 제17권5호
• /
• pp.590-600
• /
• 2014

In the wireless sensor network environment, clustering scheme has a problem that a large amount of energy is unnecessarily consumed because of frequently occurred entire re-clustering process. Some of the studies were attempted to improve the network performance by getting rid of the entire network setup process. However, removing the setup process is not worthy. Because entire network setup relieves the burden of some sensor nodes. The primary aim of our scheme is to cut down the energy consumption through minimizing entire setup processes which occurred unnecessarily. Thus, we suggest a re-clustering scheme that considers event detection, transmitting energy, and the load on the nodes. According to the result of performance analysis, our scheme reduces energy consumption of nodes, prolongs the network lifetime, and shows higher data collection rate and higher data accuracy than the existing schemes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.73.3-73
• /
• 2001

Finishing mill (FM) is set up with rolling conditions (rolling speed, rolling force, roll gap, etc.) calculated by a FSU (Finisher Setup) model considering the temperature, qualities and size of a transfer bar and a strip at the entry and exit of FM before the transfer bar is rolled through FM. If the accuracy of setup is low mass flow unbalance occurs, so that the accuracies of the strip thickness and width become lower or rolling operation fault occurs. Therefore, to enhance the performance of the FSU model and to improve mass flow and the thickness accuracy of a strip in the 7-stand finishing mill using a hot strip speed measurement system. This study is being performed. In this paper, the speed measurement system, a developed neural network for predicting ...

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.1020-1033
• /
• 2019

This paper presents a control strategy to enhance the accuracy of reactive power sharing between paralleled three-phase inverters in an islanded microgrid. In this study, the mismatch of power sharing when the line impedances have significant differences between inverters connected to a microgrid has been solved, the accuracy of the reactive power sharing in an islanded microgrid is increased, the voltage droop slope is tuned to compensate for the mismatch of voltage drops across the line impedances by using an enhanced droop controller. The proposed method ensures accurate power sharing even if the microgrid has local loads at the output of the inverters. The control model has been simulated by MATLAB/Simulink with two or three inverters connected in parallel. Simulation results demonstrate the accuracy of the implemented control method. Furthermore, in order to validate the theoretical analysis and simulation results, an experimental setup was built in the laboratory. Results obtained from the experimental setup verify the effectiveness of the proposed method.

• 대한방사선기술학회지:방사선기술과학
• /
• 제35권3호
• /
• pp.249-254
• /
• 2012

본 논문은 유방암 환자의 접선 조사 시, 치료 전 수행하는 electronic portal image와 치료 계획용 2-D reconstruction image를 비교하는 방법으로 자세의 정확성을 평가하고자 한다. 방사선 치료 중 접선조사(tangential breast treatment)만을 받는 22명의 유방암 환자를 대상으로 자세 정렬의 정확성을 확인 하였다. electronic portal image와 치료 계획용 2-D reconstruction image의 해부학적 기준 매개 변수를 비교하여 그 오차 도를 평가 하였다. 접선조사 환자의 44매 2-D reconstruction image와 110매의 EPID image 상의 비교 기준 매개 변수는 치료 조사면 중심부(field center)의 폐 길이, CLD(central lung distance), 치료 조사면 중심부의 연부조직 길이, CSTD(central soft tissue distance), 상부 총 폐 길이, ALD (above lung distance), 하부 총 폐 길이, BLD(below lung distance)이며, 내측 접선조사면(medial tangential field)에서 각 매개 변수의 오차 평균값은 1.0, -6.4, -2.1, 2.0, 각각의 표준편차(${\sigma}$)는 1.5, 2.3, 4.1, 1.1 이다. 외측 접선조사면(lateral tangential field)의 각 매개 변수 오차 평균값은 -1.5, -4.3, -2.7, -1.3 이며, 각각의 표준편차(${\sigma}$)는 3.3, 2.1, 2.9, 그리고 2.5로 나타났다. 접선조사 치료를 받는 유방암 환자의 EPID image 상에서 CLD, CSTD, ALD 그리고 BLD의 인식은 매우 용이하며 이를 근거로 자세 정렬 오차를 판단하는 것이 시간과 숙련도의 단축을 이끌어 낼 수 있다고 사료된다.

• 대한방사선치료학회지
• /
• 제19권1호
• /
• pp.1-5
• /
• 2007

목적: 방사선치료 시 OBI (on board imager) 시스템으로 환자 셋업 오차(set-up error)를 확인, 보정한 결과를 분석하여, 셋업 오차(set-up error)의 경향 및 원인을 살펴보고, 기존 필름과 EPID (electronic portal imaging device)를 사용한 방법에 비해 OBI의 정확성과 유용성에 대하여 알아보고자 한다. 대상 및 방법: 2006년 3월부터 2006년 5월까지 본원에 내원한 3차원 치료계획 환자 130명을 대상으로 주 1회 이상 OBI를 이용하여 치료전 셋업 영상의 분석을 시행하였다. 직각으로 획득한 2개의 영상을 모의 치료실에서 획득한 기준영상(reference image)과 합성(Fusion) 후 분석을 하였다. 분석 후 Vertical, Lateral, Longitudinal 방향으로 변위(Shift)거리를 측정하여 오차를 분석했다. 또한, 주요 부위별, 방향별로 구분하여 셋업 오차(set-up error) 요인들을 비교, 평가하였다. 결과: OBI를 적용하여 분석한 환자 41.5%에서 변위가 없이 Setup이 정확하였고, 52.3%에서 $1{\sim}5mm$정도의 오차가 존재하였다. 5 mm오차 이상인 환자도 6.1%가 확인되었다. 5 mm이상의 오차를 보인 환자들은 치료실내에서 확인한 결과 환자의 움직임이나 모의치료 자세와의 차이에서 오는 결과임을 알 수 있었다. 또한, 3 mm이상의 오차 경향이 3번 이상 지속될 경우에는 모의 치료실로 이동하여 보정후 치료를 시행하였다. 결론: 치료 전 2인의 근무자가 셋업을 정확히 하고 3면의 레이저와 조사야를 확인하였지만, 직각의 KV 영상으로 분석한 결과 셋업 오차가 발생할 수 있음을 확인하였다. 기존의 EPID에 의한 MV 영상은 낮은 영상의 특성과 환자의 피폭선량 증가라는 단점이 존재하지만, 본 연구에서 분석한 OBI는 모의 치료와 같은 높은 화질의 영상으로 셋업 오차의 정확한 계산과 객관적인 셋업 보정이 가능하여 영상유도 방사선치료의 정확도와 유용성을 입증할 수 있었다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.361-362
• /
• 2018

• 한국의학물리학회지:의학물리
• /
• 제32권2호
• /
• pp.40-49
• /
• 2021

Purpose: This study aimed to develop a surface-guided radiosurgery system customized for a neurosurgery clinic that could be used as an auxiliary system for improving the accuracy, monitoring the movements of patients while performing hypofractionated radiosurgery, and minimizing the geometric misses. Methods: RGB-D cameras were installed in the treatment room and a monitoring system was constructed to perform a three-dimensional (3D) scan of the body surface of the patient and to express it as a point cloud. This could be used to confirm the exact position of the body of the patient and monitor their movements during radiosurgery. The image from the system was matched with the computed tomography (CT) image, and the positional accuracy was compared and analyzed in relation to the existing system to evaluate the accuracy of the setup. Results: The user interface was configured to register the patient and display the setup image to position the setup location by matching the 3D points on the body of the patient with the CT image. The error rate for the position difference was within 1-mm distance (min, -0.21 mm; max, 0.63 mm). Compared with the existing system, the differences were found to be as follows: x=0.08 mm, y=0.13 mm, and z=0.26 mm. Conclusions: We developed a surface-guided repositioning and monitoring system that can be customized and applied in a radiation surgery environment with an existing linear accelerator. It was confirmed that this system could be easily applied for accurate patient repositioning and inter-treatment motion monitoring.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.95-103
• /
• 2006

The purpose of this study was to review the relevant literature about coaching and thereupon, survey the coaching methods used for golf lesson to reinterpret them and thereby, describe in view of kinetics the swing errors committed frequently by amateur golfers and suggest more scientific golf coaching methods. For this purpose, kinetic elements were divided into accuracy and power ones and therewith, the variables affecting such elements were identified. For this study, a total of 60 amateur golfer were sampled, and their swing forms were photographed with two high-speed digital cameras, and the resultant images were analyzed to determine the errors of each form kinetically, which would be analyzed again with the program V1-5000. The kinetic elements could be identified as accuracy, power and accuracy & power. Thus, setup and trajectory were classified into accuracy elements, while differences of inter-joint angles, cocking and delayed hitting. Lastly, timing and axial movement were classified into accuracy & power elements. Three errors were identified in association with setup. The errors related with trajectory elements accounted for most (6) of the 20 errors. Three errors were determined for inter-joint angle differences, and one error was associated with cocking and delayed hitting. Lastly, one error was classified into timing error, while five errors were associated with axial movement. Finally, as a result of arranging the errors into a cross table, it was found that the errors were associated with each other between take-back and back-swing, take-back and follow-through, back-swing and back-swing top, and between back-swing and down-swing. Namely, an error would lead to other error repeatedly. So, it is more effective to identify all the errors for every form and correct them comprehensively rather than single out the errors and correct them one by one.