• 제목/요약/키워드: Set-up effect

검색결과 1,227건 처리시간 0.028초

물-시멘트비 및 시멘트 종류가 해양콘크리트의 내염해성에 미치는 영향 (Effect of W/C and the Kinds of Cement on the Chloride Invasion Resistance of the Offshore Concrete)

  • 신홍철;유재강;박상준;김영진
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
    • /
    • pp.165-168
    • /
    • 2005
  • This paper investigated the effect of W/C and the kinds of cement on the chloride invasion resistance of the offshore concrete. W/C set up 0.30, 0.35, 0.40 and The kinds of cement were used four(ordinary portland cement, ground granulated blast-furnace slag cement, belite cement, low heat portland cement). For the electrical migration test, NT BUILD 492's method was used to estimate the migration coefficient of chloride ion. As a result, the migration coefficients of chloride ion of concrete according to w/c were shown reducing with the w/c increasing, and according to kinds of cement were shown discrepancy in chloride invasion resistance. Especially blast-furnace slag cement was most low it. In the each cement, the compressive strength was shown related to the migration coefficient.

  • PDF

공공부문 지식관리시스템의 성과에 미치는 영향요인에 관한 연구 -A지역 자치단체를 중심으로- (The Affecting Factors effect on the Performance of Knowledge Management Systems in Public Sector: Focused on Korea Local Governments)

  • 한동효;강태경
    • 디지털융복합연구
    • /
    • 제2권1호
    • /
    • pp.113-126
    • /
    • 2004
  • In this paper we would like to provide a help to implementing KMS(Knowledge Management System) in public sector. For this purpose, we set up five contingency environmental factors and three process factors of knowledge management. And then investigates affecting factors effect on the performance of KMS in public sector by empirical study, A field survey of public officers in Korea local government was conducted. Complete data for 333 KMS users was analyzed to determine relationship of the research constructs. The system of evaluation and compensation is the most important factor effects on the process of KM and the performance of KMS. These results provide empirical evidence that supports the necessity of rational motivation systems does lead to effective implementation of KMS in public sector.

  • PDF

경피적 에너지전송 시스템의 효율성 향상에 관한 기초적 연구 (A Basic Study on increase of efficiency for a Transcutaneous Energy Transmission System)

  • 정지훈;김동욱
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2003년도 춘계학술발표논문집
    • /
    • pp.267-270
    • /
    • 2003
  • All artificial infernal organs which are using electric energy supply energy with inductive couple. Transcutaneous energy transmission system enhance survival chance of the patients and quality of life by reducing volume and mass. In this research, we used both tune in transmission system in state of fixing cycle in order to increase the voltage gain and the current gain and to reduce effect of leakage inductance. Also to maximize the effect of resonance, a constant frequency duty cycle control method is used. Test is progressed with litz wire which is set up with various sizes of core to minimize size of converter. This research aimed in analysis of transcutaneous energy transmission system and in measuring of stability and efficiency of Lithium-ion battery charge which are using transmitted energy.

  • PDF

The Changing Roles of Ownership in the Economic Growth in China

  • Lee, Hyuntai
    • 분석과 대안
    • /
    • 제4권2호
    • /
    • pp.39-70
    • /
    • 2020
  • This paper examines the changing roles of ownership in the economic growth by using a panel data set of 30 provinces in China for the period (1999-2010). With the use of absolute and relative presence variables, this study shows that private enterprises have emerged as the engine of economic growth in China in the later period (2005-2010). The growing size and number of private enterprises are positively linked to growth. However, though foreign-invested enterprises have been acclaimed as the main contributors to economic growth in China, they have minimal effect on the economic growth in the later period. State-owned enterprises have a significant and negative effect on the economic growth in the later period. The results can be interpreted that the engine of growth in China has been changed over time from other ownerships to private ownership. Private companies have developed a lot in every respect and started to lead the economy for long-run growth. China initiated its economic growth by adopting foreign capital and it is still the top destination for foreign direct investment among developing countries. However, to sustain the growth over a long period, private sector should be of great importance and perform a key role in the view of catch-up economics.

  • PDF

챗봇 활용 수학 프로젝트 학습이 인공지능 리터러시에 미치는 영향 (The Effect of Math Project Learning Using Chat-bot on Artificial Intelligence Literacy)

  • 유희정;고호경
    • East Asian mathematical journal
    • /
    • 제39권2호
    • /
    • pp.229-250
    • /
    • 2023
  • The purpose of this study is to investigate the impact of project learning using chatbots on artificial intelligence literacy. The subjects of the study were a total of 41 students from 1st to 3rd grade of general high school in Gyeonggi-do. Classes were held after school for a total of 6 hours, and the contents of the classes consisted of the concept and characteristics of artificial intelligence, the concept and expression of knowledge, OBT application for Kakao i open builder, guidance on how to create chatbots, and chatbot production practice. As a result of the pre- and post-test of the experimental group, the quantitative value of artificial intelligence literacy increased in all three grades. In the case of second-year students who set up a comparison group, when compared with the results of the comparison group, there was a significant positive effect on the AI literacy result, and female students were found to be more effective than male students.

Broadband Instantaneous Frequency Measurement System Based on the Dual Paths of the Stimulated Brillouin Scattering Effect

  • Jiahong Zhang;Weijie Liao
    • Current Optics and Photonics
    • /
    • 제7권4호
    • /
    • pp.378-386
    • /
    • 2023
  • A wideband instantaneous frequency measurement (IFM) system is been proposed, designed and analyzed. Phase modulation to intensity modulation conversion is implemented based on the stimulated Brillouin scattering (SBS) effect, and the microwave frequency can be measured by detecting the change in output power. Theoretical analysis shows that the frequency measurement range can be extended to 4fb by adjusting the two sweeping signals of the phase modulators with a difference of 2fb. The IFM system is set up using VPI transmission maker software and the performances are simulated and analyzed. The simulation results show that the measurement range is 0.5-45.96 GHz with a maximum measurement error of less than 9.9 MHz. The proposed IFM system has a wider measurement range than the existing SBS-based IFM system.

철도곡선부 속도향상을 위한 선형개량요소 결정 (Determination of Route alignment improvement parameter for Speed up in Railway curve sections)

  • 조규전;이남수;정의환
    • 한국측량학회지
    • /
    • 제13권2호
    • /
    • pp.209-218
    • /
    • 1995
  • 철도속도향상 계획은 미래에 있어 풍요로운 사회를 실현시키는데 중요한 역할을 담당하게 될 것이다. 열차 운행속도에 매우 큰 영향을 주는 선형 요소는 곡선구간으로서 이 구간에서는 열차의 주행성과 승객의 승차기분을 저해하는 요인을 줄이기 위해 완화곡선구간을 포함한 곡선부에 캔트 및 슬랙을 설치하게 되는데 이러한 값들은 열차의 종류가 다르기 때문에 균형적인 값을 사용하지 못하고 어느 정도 부족한 상태로서 유지되고 있다. 본 연구에서는 곡선반경별로 설정캔트량을 조사하여 부족캔트량에 대한 횡가속도를 산출하여 곡선부에서의 주행성을 검토하여 효과적인 곡선관리 방법을 제시하였으며 선형개량요소를 적용하여 속도향상 효과를 얻었다.

  • PDF

A Sensitivity Analysis of Accuracy for COMS Outgoing Longwave Radiation Product

  • Kim, Hyunji;Han, Kyung-Soo;Lee, Chang Suk;Shin, Inchul
    • 대한원격탐사학회지
    • /
    • 제31권1호
    • /
    • pp.39-46
    • /
    • 2015
  • Outgoing Longwave Radiation (OLR) is emitted energy from the Earth that is an important indicator of cooling effect in global scale and meteorological events in regional scale. Satellite-driven OLR products have its advantages overcoming spatially limited representation. The Korean geostationary satellite, Communication, Ocean and Meteorological Satellite (COMS), has been producing OLR product in accordance with its own algorithm since Apr. 2011. This study introduces Spatio-Temporally Equalized Match-up (STEM) approach to evaluate the COMS OLR products. We have tested a number of cases of thresholds set by standard deviations of a subpixel $10.8{\mu}m$ to find optimal representation of OLR in the selective match-up. Each case was then validated with broadband reference data, Clouds and the Earth's Radiant Energy System (CERES). We found that selective STEM approach was useful to validate OLR product especially its distribution in homogeneous grids.

한국 유전체 코호트 구축의 전략적 고려사항 (Strategy Considerations in Genome Cohort Construction in Korea)

  • 성주헌;조성일
    • Journal of Preventive Medicine and Public Health
    • /
    • 제40권2호
    • /
    • pp.95-101
    • /
    • 2007
  • Focusing on complex diseases of public health significance, strategic issues regarding the on-going Korean Genome Cohort were reviewed: target size and diseases, measurements, study design issues, and follow-up strategy of the cohort. Considering the epidemiologic characteristics of Korean population as well as strengths and drawbacks of current research environment, we tried to tailor the experience of other existing cohorts into proposals for this Korean study. Currently 100,000 individuals have been participating the new Genome Cohort in Korea. Target size of de novo collection is recommended to be set as between 300,000 to 500,000. This target size would allow acceptable power to detect genetic and environmental factors of moderate effect size and possible interactions between them. Family units and/or special subgroups are recommended to parallel main body of adult individuals to increase the overall efficiency of the study. Given that response rate to the conventional re-contact method may not be satisfactory, successful follow-up is the main key to the achievement of the Korean Genome Cohort. Access to the central database such as National Health Insurance data can provide enormous potential for near-complete case detection. Efforts to build consensus amongst scientists from broad fields and stakeholders are crucial to unleash the centralized database as well as to refine the commitment of this national project.

High heat flux limits of the fusion reactor water-cooled first wall

  • Zacha, Pavel;Entler, Slavomir
    • Nuclear Engineering and Technology
    • /
    • 제51권5호
    • /
    • pp.1251-1260
    • /
    • 2019
  • The water-cooled WCLL blanket is one of the possible candidates for the blanket of the fusion power reactors. The plasma-facing first wall manufactured from the reduced-activation ferritic-martensitic steel Eurofer97 will be cooled with water at a typical pressurized water reactor (PWR) conditions. According to new estimates, the first wall will be exposed to peak heat fluxes up to $7MW/m^2$ while the maximum operated temperature of Eurofer97 is set to $550^{\circ}C$. The performed analysis shows the capability of the designed flat first wall concept to remove heat flux without exceeding the maximum Eurofer97 operating temperature only up to $0.75MW/m^2$. Several heat transfer enhancement methods (turbulator promoters), structural modifications, and variations of parameters were analysed. The effects of particular modifications on the wall temperature were evaluated using thermo-hydraulic three-dimensional numerical simulation. The analysis shows the negligible effect of the turbulators. By the combination of the proposed modifications, the permitted heat flux was increased up to $1.69MW/m^2$ only. The results indicate the necessity of the re-evaluation of the existing first wall concepts.