• 한국경영과학회지
• /
• 제22권1호
• /
• pp.25-49
• /
• 1997

Printed circuit board (PCB) assembly line configuration is characterized by very long set-up times and high work in process (WIP) inventory level. The scheduling method can significantly reduce the set-up times and WIP inventory level. Greedy sequence dependent scheduling (GSDS) method is proposed based on the current methods. The proposed method is compared with the current method in terms of three performance measures: line throughput, average WIP inventory level, and implementation complexity.

• 한국콘텐츠학회논문지
• /
• 제7권4호
• /
• pp.133-140
• /
• 2007

기존의 상업적인 3D CG 애니메이션 제작 공정 구조는 부서간의 병목현상으로 모든 부서가 동시에 작업을 할 수 있는 효율적인 구조로 이루어지지 않고 있다. 예를 들어, 애니메이팅 작업을 하기 위해선 선행되어야 할 모델링과 Set-Up 단계가 끝나기 전에는 애니메이팅 작업을 할 수가 없다. 그 결과, 제작 일정의 지연, 제작비의 손실을 발생시키게 되고, 또한 선행된 작업에 수정을 가할 경우 수정이 끝날 때 까지 애니메이팅 작업은 중단된다는 결과를 야기 시킨다. 이런 문제는 표준으로 정해 놓은 "마스터 캐릭터"의 적용으로 도움을 줄 수가 있는데, 프로젝트의 시작과 동시에 모델링과 set-up 그리고 다른 어떤 작업과도 독립적으로 애니메이팅 작업을 시작 할 수 있고 수정 작업도 독립적으로 수행이 가능해서 애니메이션 제작공정을 효율적으로 관리할 수 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.252-255
• /
• 2009

The roll gap set-up in the finishing mill is one of the most important technologies in the hot plate rolling process. As the target thickness can be obtained by the correct set-up of the roll gap, improving the roll gap set-up technology is very critical for plate thickness accuracy. The main cause of thickness variation in hot plate mills is the non-uniform temperature distribution along the length of the slab. The objective of this study is to adjust the roll gap set-up for the thickness accuracy of plate in hot rolling process considering top-end temperature drop. Therefore this study has concentrated on determining the correct amounts of roll gap to compensate thickness variation due to top-end temperature drop. The off-line simulation of compensated roil gap significantly decreases top-end thickness variation.

• International Journal of Arrhythmia
• /
• 제18권2호
• /
• pp.66-76
• /
• 2017

Background and Objectives: Although an anterior linear ablation is an effective lesion set in radiofrequency catheter ablation (RFCA) for longstanding persistent atrial fibrillation (L-PeAF), its durability for bidirectional block (BDB) is only about 60% at repeat procedure. We hypothesized that changes in electrocardiogram (ECG) may predict an anterior line block state and the clinical outcome of L-PeAF ablation. Subjects and Methods: We studied 304 L-PeAF patients (77% male, $60{\pm}10yrs$), who consistently underwent RFCA Dallas lesion set (circumferential pulmonary vein isolation, posterior box lesion, and anterior line) protocol with subsequent comparison of pre-procedural and post-procedural P wave axes, and one year follow-up (n=205) sinus rhythm (SR) ECGs. Results: 1. P wave axis shifted inferiorly at immediate post-procedure (p<0.001), and was independently correlated with BDB of anterior line (${\ss}=10.4$, 95% confidence interval [CI] 2.79-17.94, p=0.008). 2. The degree of post-procedural inferior shift of P wave axis did not reflect clinical recurrence within one-year (n=205, p=0.923), potentially due to conduction recovery of an anterior line. However, among 160 patients without clinical recurrence within one-year, P wave axis at one-year ECG was independently associated with very late recurrence of AF after one-year (n=160, hazard ratio [HR] 0.98; 95% CI 0.97-0.99, p=0.001), during $45.6{\pm}16.7$ months of follow-up. 3. Among 22 patients who underwent repeat procedures, P wave axis shift was more significant in patients with maintained BDB of an anterior line than in those without (p=0.015). Conclusion: An inferior shift of P wave axis reflects the achievement and the maintenance of an anterior line BDB, and is associated with better long-term clinical outcome after catheter ablation for L-PeAF based on Dallas lesion set.

• 소성∙가공
• /
• 제18권4호
• /
• pp.290-295
• /
• 2009

The roll gap set-up in the finishing mill is one of the most important technologies in the hot plate rolling process. As the target thickness can be obtained by the correct set-up of the roll gap, improving the roll gap set-up technology is very critical for plate thickness accuracy. The main cause of thickness variation in hot plate mills is the non-uniform temperature distribution along the length of the slab. The objective of this study is to adjust the roll gap set-up for the thickness accuracy of plate in hot rolling process considering top-end temperature drop. Therefore this study has concentrated on determining the correct amounts of thickness variation according to top-end temperature drop and roll gap to compensate thickness variation. The control method of roll gap set-up which can improve the thickness accuracy was proposed. The off-line simulation of compensated roll gap significantly decreases top-end thickness variation.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권4호
• /
• pp.221-226
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권4호
• /
• pp.221-221
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문
• /
• pp.101-109
• /
• 1996

Mini-mill process which is one of the new steel -marking technologies to be able to produce the hot rolled coils by thin slab caster of ISP(In-Line Strip Production) type, will be completed in the Kwangyang Steel Works of POSCO in August, 1996, SEt-Up Model of finishing mill which consists of 5 stands is the most basic and essential in mini-mill plant. Therefore, the simulation program of Finishing-mill Set-Up model were developed in this research , using new temeprature prediction model, roll gap model and rolling physical model. Using the developed FSU program , pass schedules to produce the strips with target strip thickness of 1.8mm, 2.0mm, 2.3mm, 2.7mm an d3.0mm were also determined respectively.

• 대한방사선치료학회지
• /
• 제30권1_2호
• /
• pp.185-189
• /
• 2018

목 적 : Set-up Line을 유지하면서 치료 중 씻을 수 있도록 하여 방사선 치료 시 환자의 삶의 질 만족도를 평가하였다. 대상 및 방법 : 2018년 1월 본원에 내원한 환자 60명을 대상으로 반복되는 방사선 치료 시 환자의 불편사항을 조사하였다. 가장 큰 불편사항으로 치료 중 씻지 못하는 것에 대부분 불편함을 호소하였고(64 %), 이에 대한 해결책으로 Set-up Line 위에 외과용 테이프를 부착하여 치료 기간 중 환자분이 씻을 수 있도록 하였다. 외과용 테이프를 적용한 환자 총 50명을 대상으로 5점 기준으로 만족도를 조사하였다(1점 매우 불만족한다, 2점 불만족한다, 3점 보통이다, 4점 만족한다, 5점 매우 만족한다). 50명 중 40명은 치료를 처음 시작한 환자를 대상으로, 10명은 치료 진행 중인 환자를 대상으로 각각 평가를 진행하였다. 결 과 : 1차 설문조사에 응한 환자의 성별은 여성 68 %, 남성 32 %이였으며, 나이는 50대 이하 34 %, 50~60대 38 %, 60대 이상이 28 %로 나타났다. 치료부위는 유방 57 %, 흉부 13 %, 골반부 10 % 등으로 나타났다. 외과용 테이프를 적용 후 2차 설문조사한 결과 치료를 시작한 환자 40명 중 여성 25명, 남성 15명으로 조사되었고, 치료부위는 유방 22명, 골반부 18명으로 나타났다. 5점 척도 기준의 만족도에서 1-3점이 5명, 4-5점이 35명(1점 2명, 2점 2명, 3점 1명, 4점 17명, 5점 18명)으로 매우 만족 45 %, 만족 43 %로 나타났다. 치료를 진행 중에 적용한 환자에 대한 설문조사 결과에서 10명 중 여성 9명, 남성 1명으로 조사되었고, 치료부위는 유방 8명, 골반부 2명으로 나타났다. 5점 척도 기준의 만족도에서 1점이 1명, 5점이 9명으로 90 %가 매우 만족하는 것으로 조사되었다. 결 론 : 방사선 치료 시 정확성도 중요한 만큼 암환자의 삶의 질 향상도 고려해야 할 사항이다. 외과용 테이프를 적용 후, 치료를 시작한 환자의 88 %, 치료 진행 중 적용한 환자의 90 %가 만족을 보임을 알 수 있었다. 특히, 치료 진행 중 적용한 환자에게 더 높은 만족도를 보였다. 이를 통해 모든 환자에게 적용이 어렵다면 불편함을 호소하는 환자에게 선택적으로 적용하는 것도 암환자 삶의 질을 높이는데 큰 도움이 될 것을 판단된다.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.499-506
• /
• 2007

The tiny camera module used in a modern cellular phone requires precise assembly processes. To meet the requirement of high resolution and functionality, the number of parts used in a camera module becomes larger and larger. As the market grows rapidly, an automatic camera phone assembly process is required. However, diverse production line and short life cycle make it difficult to build an affordable assembly line. To attack this problem, a flexible and expandable lens assembly system is proposed. To save the manufacturing line set-up time, modular concept is adopted. Also, each module is designed to have intelligence to simplify the set-up process. The assembly system is built up on the standard flat-form that includes a vibration free base, air and electric supplies, and electronic controllers, etc. Furthermore, the assembly cell has the capability of handling tiny, thin, or transparent parts which are very difficult to identify without machine vision.