• Journal of Industrial Technology
• /
• v.36
• /
• pp.71-76
• /
• 2016

In this study, we determined the precise coordinates of TBMs (Tidal Bench Marks), which used as the national reference points in coastal area of Korea, using a GPS data analysis SW for the academic and scientific applications, GAMIT/GLOBK. For accurate 3-D positioning of TBM locations, we performed the GPS point surveying according to the national surveying policy and also acquired the GPS data for 48 TBMs located in the western and southern coastal part of Korea. Considering the results of baseline analysis to each observation session obtained from GAMIT module, the baseline analysis was realized to be done precisely because the values of Normalized RMS (NRMS) were mostly less than ${\pm}0.20mm$. Before the network adjustment using GLOBK module, we evaluated the suitability of observations for each session by applying the chi-squared test (${\chi}^2$ test) to the degree of freedom in observed session. An overall distributions of ${\chi}^2$ test were less than 1.0 for all sessions, and the statistical of ${\chi}^2$ test showed the average, 0.267 with minimum and maximum value, 0.063 and 0.653, respectively. Finally, we analyzed the network adjustment for 48 TBMs to reduce the residuals of baseline analysis on each point by connecting with 42 permanent GPS stations in Korea. In the network adjustment procedure, we set up the weighted values of each permanent station to be allocated between 0.9 and 1.14, and also removed the observed points having residual exceeds 4-times of standard deviation ($4{\sigma}$).

• Environmental Mutagens and Carcinogens
• /
• v.25 no.1
• /
• pp.6-12
• /
• 2005

Many compounds might become activated after absorption of UV light energy. In some cases, the resulting molecule may undergo further biological reaction of toxicological relevance related especially to the photo-carcinogenicity resulting from photo-genotoxicity. However, no regulatory requirements have been issued with the exception of guideline issued by the Scientific Committee of Cosmetology, Commission of the European Communities (SCC/EEC) on the testing of sunscreens for their photo-genotoxicity. Thus, the objectives of this study are to investigate the utility of photo-Ames assay for detecting photo-mutagens, and to evaluate its ability to predict rodent photo-carcinogenicity. Photo-Ames assay was performed on five test substances that demonstrated positive results in photo-carcinogenicity tests: 8-methoxypsoralen (photoactive substance that forms DNA adducts in the presence of ultraviolet A irradiation), chlorpromazine (an aliphatic phenothiazine an a-adr-energic blocking agent), lomefloxacin (an antibiotic in a class of drugs called fluoroquinolones), anthracene (a tricyclic aromatic hydrocarbon a basic substance for production of anthraquinone, dyes, pigments, insecticides, wood preservatives and coating materials) and retinoic acid (a retinoid compound closely related to vitamin A). Out of 5 test substances, 3 showed a positive outcome in photo-Ames assay. With this limited data set, an investigation into the predictive value of this photo-Ames test for determining the photo-carcinogenicity showed that photo-Ames assay has relatively low sensitivity (the ability of a test to predict carcinogenicity). Thus, to determine the use of in vitro genotoxicity tests for prediction of carcinogenicity,' several standard photo-genotoxicity assays should be compared for their suitability in detecting photo-genotoxic compounds.

• Journal of Korea Trade
• /
• v.24 no.6
• /
• pp.1-18
• /
• 2020

Purpose - This study investigates whether a listing effect exists in cross-border M&As and whether the effect can be attributed to the uncertainty of the GDP growth rate in the target firm's home country. We apply a joint variable analysis using M&A announcement data from the Korea Exchange (KRX), Shanghai Stock Exchange (SSE), and the Taiwan Stock Exchange (TWSE) from 2004 to 2013. We also conduct an event study using the measure of the uncertainty of the GDP growth rate (based on IMF statistics) in 55 target countries. Design/methodology - We measure the abnormal return (AR) using the market-adjusted model. We test the significance of the AR and the cumulative abnormal return (CAR) using a one-sample t-test. We examine the characteristics of the CARs depending on whether the target company is listed by applying a difference analysis using CAR as a test variable. In addition, we set CAR (-5, +5) as a dependent variable to identify the cause of the listing effect, and test both the financial characteristic variables of the acquirer and the collective characteristic variables of the merger as independent variables in the multiple regression analysis. Findings - First, we find the listing effect of cross-border M&As in the KRX, SSE, and TWSE, which represent the capital markets in Korea, China, and Taiwan, respectively. This listing effect persists during the global financial crisis and has a negative effect on the wealth of acquiring shareholders, especially when the target countries are emerging markets. Second, greater uncertainty regarding the target countries' economic growth in cross-border M&As has a negative effect on the wealth of acquiring firms' shareholders. Third, our empirical analysis demonstrates that the listing effect is attributable to the fact that firms listed in a target country with greater uncertainty of economic growth are more directly and greatly exposed to uncertain capital markets through stock markets, than are unlisted firms. Originality/value - This study is significant in that it presents a new strategic perspective in the study of cross-border M&As by demonstrating empirically that the listing effect is attributable to the uncertainty regarding the economic development of the target firms' home countries.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.6
• /
• pp.45-52
• /
• 2021

A hot-firing test was conducted using gaseous-methane and gaseous-oxygen under highly fuel-rich condition as a prior study for the development of a liquid propellant small rocket engine. To compare combustion characteristics for various equivalence ratios, the oxygen flow rate was set to 12 g/s and the methane flow rate was changed according to the equivalence ratio. As a result, it was observed that the steady-state characteristic velocity obtained during the hot-firing test steeply rose in the latter part of each test: the difference between the former and the latter steady value was enhanced overall in proportion to the equivalence ratio. Based on this, the equivalence ratio range depending on the variational characteristics of the characteristic velocity could be divided into three combustion regimes.

• Restorative Dentistry and Endodontics
• /
• v.46 no.4
• /
• pp.59.1-59.14
• /
• 2021

Objectives: This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression. Materials and Methods: Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed (n = 18). After insertion of the bioceramic materials, the push-out test was performed. The failure mode was analyzed using stereomicroscopy. Another set of cylindrically-shaped bioceramic samples (n = 10) was prepared for compressive strength testing. The normality of data distribution was analyzed using the Shapiro-Wilk test. The Kruskal-Wallis and Friedman tests were used for the push-out test data, while compressive strength was analyzed with analysis of variance and the Tukey test, considering a significance level of 0.05. Results: Biodentine presented a higher median bond strength value (14.79 MPa) than MTA Repair HP (8.84 MPa) and Bio-C Repair (3.48 MPa), with a significant difference only between Biodentine and Bio-C Repair. In the Biodentine group, the most frequent failure mode was mixed (61%), while in the MTA Repair HP and Bio-C Repair groups, it was adhesive (94% and 72%, respectively). Biodentine showed greater resistance to compression (29.59 ± 8.47 MPa) than MTA Repair HP (18.68 ± 7.40 MPa) and Bio-C Repair (19.96 ± 3.96 MPa) (p < 0.05). Conclusions: Biodentine showed greater compressive strength than MTA Repair HP and Bio-C Repair, and greater bond strength than Bio-C Repair. The most frequent failure mode of Biodentine was mixed, while that of MTA Repair HP and Bio-C Repair was adhesive.

• Analytical Science and Technology
• /
• v.35 no.6
• /
• pp.267-273
• /
• 2022

In this study, a quality evaluation was conducted to change the sell-by date of fish cakes to the use-by date. For product quality evaluation, storage conditions were set at 5, 10, and 15 ℃, and five tests of pH, acid value, volatile basic nitrogen, bacterial count, and coliform group were performed. As a result of the experiment, the quality safety limit period of fish cakes stored at 5 ℃ was 43 days, that of fish cakes stored at 10 ℃ were 30 days, and that of fish cakes stored at 15 ℃ was 7 days. Among the five test items used for quality evaluation, the quality-limit indicators were acid value, number of bacteria, and coliform groups. The index that determined the quality safety-limit period under the three storage conditions was the bacterial count. The sell-by date of the fish cake used in this experiment was 10 days. However, through quality evaluation, the use-by date at 10 ℃ was 28.5 days, which was calculated by multiplying the 30 days; the quality limit period, by a safety factor of 0.95. However, this study conducted a quality study on one item of fish cakes from a single company, and it was difficult to use the quality safety-limit period and use-by date set in this study universally. To change the sell-by date to the use-by date, extensive quality research on various products will be required. If this system is well established, it can help reduce food waste through proper consumption of food, and consumers will be able to consume food with confidence.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.248-254
• /
• 2017

In order to secure the reliability of pathogenic microorganisms such as Cryptosporidium and Giaridia, which are chlorophilic protozoans, membrane filtration systems have been widely used in water purification process. hese integrity tests are classified into direct and indirect methods. Based on the bubble point theory, the pressure-based test in the direct method is presented in the USEPA Guidance Manual with sensitivity to detect a minimum size of pathogenic microorganisms of $3{\mu}m$ or more. Indirect methods are widely used in that they are capable of continuous operation in on-line state, but there is a very low sensitivity of damage detection compared to the direct method, and there is a limit that can not specify the damage area, so it is necessary to improve this sensitivity. In this study, we compared the LRVDIT and UCL values according to the type of membrane defect, number of fiber breaks, and initial set pressure value through the Integrity Test by Pressure Decay Test (PDT).

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.4
• /
• pp.455-465
• /
• 2006

Statement of problem: Many factors influence shade determination in clinical practice and shade matching is highly affected by the viewing conditions. Purpose : This study investigated the differences in shade perception among distinct groups of dental personnel (10 prosthodontists, 10 general practitioners, 10 last-year dental students and 10 dental technicians) Material and method: Four groups of dental personnel were investigated. They were tested to eliminate color blindness. To compare shade selection ability, they were asked to match four test tabs of shades A3, B2, C2 and D4 (VITAPAN$^{(R)}$ Classical shade guide. The identification codes of the shade tabs were masked to prevent shade memory. ) against another full set of VITA$^{(R)}$ PAN$^{(R)}$ Classical shade guide under similar lighting conditions. Shade selections were randomly repeated five times every week and then the repeatability between dental personnel was evaluated. To compare value perception ability, they were asked to arrange randomly selected five test tabs (Bl, A2, D2, C3, A4) in descending order from the brightest to the darkest. To compare hue determination ability, they were asked to divide selected eight test tabs (n, A3, B2, B3, C2, C3, D2, D3) into four groups by manufacturer as follows : Group A-Reddish brown, Group B-Reddish yellow. Group C-Grey. Group D-Reddish grey. Results and conclusion : The obtained results were as follows : 1. For the value perception ability and hue determination ability. there was no significant difference among 4 groups: prosthodontists, general practitioners, dental students, dental technicians (P>.05). 2. For shade selection ability, the prosthodontists and dental technicians were significantly higher than dental students(P<.05). 3. The repeatability of selected shade in the dental technicians was significantly higher than that of general practitioners and dental students(P<.05). 4. The prosthodontists and dental technicians had significantly higher selection ability than dental students for shade B2 (P<.05).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.413-420
• /
• 2011

An experiment was conducted to suggest the road pavement material combining wooden chip crushed from little useful roots and branches from logging sites or wood waste from construction sites with urethane resin. For the specimen, the mass ratio of urethane resin to construction wood waste chip/lumber waster chip was set to three different levels of 0.5, 0.75, and 1.0, which was measured, mixed with mixer, and molded; 7 days after, tensile strength test, elasticity test using golf balls and steel balls, permeability coefficient measurement, and flammability test were executed. As the result, the tensile strength of the specimen at the dry state in the air exhibited the range of 0.2-1.1MPa, and there was no change after 7 days of aging. When submerged in water, however, the strength was partially diminished; the diminishing rate was greater for less urethane resin usage, and therefore it appears desirable to set the mass ratio of resin to the wood waste chip over 0.75 to consider the moisture intrusion by precipitation and such. As the result of elasticity test, the GB and SB coefficients of the specimen using wood waste chips and urethane resin were measured to be low at below 20%, exhibiting excellent elasticity as road pavement material. Also, the permeability coefficient was over 0.5mm/sec for specimens of all combinations, exceeding the standard value required after construction for permeable pavement material, and the flammability of wood-type pavement material was evaluated to have no practical issues.

• Asia pacific journal of information systems
• /
• v.19 no.4
• /
• pp.177-200
• /
• 2009

AIn the advanced - economy, the services industry hasbecome a dominant sector. Evidently, the services sector has grown at a much faster rate than any other. For instance, in such developed countries as the U.S., the proportion of the services sector in its GDP is greater than 75%. Even in the developing countries including India and China, the magnitude of the services sector in their GDPs is rapidly growing. The increasing dependence on service gives rise to new initiatives including service science and service-dominant logic. These new initiatives propose a new theoretical prism to promote the better understanding of the changing economic structure. From the new perspectives, service is no longer regarded as a transaction or exchange, but rather co-creation of value through the interaction among service users, providers, and other stakeholders including partners, external environments, and customer communities. The purpose of this study is the following. First, we review previous literature on service, service innovation, and service systems and integrate the studies based on service dominant logic. Second, we categorize the ten propositions of service dominant logic into conceptual propositions and the ones that are directly related to service provision. Conceptual propositions are left out to form the research model. With the selected propositions, we define the research constructs for this study. Third, we develop measurement items for the new service concepts including service provider network, customer network, value co-creation, and convergence of service with product. We then propose a research model to explain the relationship among the factors that affect the value creation mechanism. Finally, we empirically investigate the effects of the factors on firm performance. Through the process of this research study, we want to show the value creation mechanism of service systems in which various participants in service provision interact with related parties in a joint effort to create values. To test the proposed hypotheses, we developed measurement items and distributed survey questionnaires to domestic companies. 500 survey questionnaires were distributed and 180 were returned among which 171 were usable. The results of the empirical test can be summarized as the following. First, service providers' network which is to help offer required services to customers is found to affect customer network, while it does not have a significant effect on value co-creation and product-service convergence. Second, customer network, on the other hand, appears to influence both value co-creation and product-service convergence. Third, value co-creation accomplished through the collaboration of service providers and customers is found to have a significant effect on both product-service convergence and firm performance. Finally, product-service convergence appears to affect firm performance. To interpret the results from the value creation mechanism perspective, service provider network well established to support customer network is found to have significant effect on customer network which in turn facilitates value co-creation in service provision and product-service convergence to lead to greater firm performance. The results have some enlightening implications for practitioners. If companies want to transform themselves into service-centered business enterprises, they have to consider the four factors suggested in this study: service provider network, customer network, value co-creation, and product-service convergence. That is, companies becoming a service-oriented organization need to understand what the four factors are and how the factors interact with one another in their business context. They then may want to devise a better tool to analyze the value creation mechanism and apply the four factors to their own environment. This research study contributes to the literature in following ways. First, this study is one of the very first empirical studies on the service dominant logic as it has categorized the fundamental propositions into conceptual and empirically testable ones and tested the proposed hypotheses against the data collected through the survey method. Most of the propositions are found to work as Vargo and Lusch have suggested. Second, by providing a testable set of relationships among the research variables, this study may provide policy makers and decision makers with some theoretical grounds for their decision making on what to do with service innovation and management. Finally, this study incorporates the concepts of value co-creation through the interaction between customers and service providers into the proposed research model and empirically tests the validity of the concepts. The results of this study will help establish a value creation mechanism in the service-based economy, which can be used to develop and implement new service provision.